PlainWorker
Employers › OH

Manufacturing · Columbus, OH

Core Molding Technologies, INC.

According to OSHA enforcement records (2010–2026), Core Molding Technologies, INC. has a concerning safety record: 47 violations across 18 inspections. See the full breakdown below.

Top 1% by penalty77% serious
$130,028
OSHA penalties
47
Violations cited
18
OSHA inspections
#1,117
of 100,495 penalized employers

Core Molding Technologies, INC. in Columbus, OH has been the subject of 18 OSHA workplace inspections and 47 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $130,028. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Core Molding Technologies, INC. 18 times over 14 years, roughly annually. These inspections resulted in 47 violations, averaging 2.6 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top 1% of penalized employers nationally. Of these, 36 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs far above peers (7.1x the sector average) on inspection frequency. For comparison, Avila's Tile and Cabinets in Tulare, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

2.6
violations per inspection
76.6%
of violations were serious
99%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Core Molding Technologies, INC. runs far above peers (8.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$130,028 Bottom 1% least affordable more affordable than 1% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($130,028) is well above this band, the chart's rightmost open-ended bucket. This employer: $130,028 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Core Molding Technologies, INC.

The federal enforcement record for Core Molding Technologies, INC. in Columbus, OH includes 18 OSHA inspections and 47 violations, translating to 2.61 violations per inspection. Of those violations, 36 (76.6%) were classified as serious, 0 (0.0%) as willful, and 2 (4.3%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $278,306 in initial penalties against this employer, later adjusted to a current total of $130,028 - a 53.3% reduction. Average penalty per inspection works out to $7,224. Against the Manufacturing industry average of $15,410 per employer, this record runs far above peers (8.4x the sector average).

Inspection activity spans from 2010-02-02 to 2024-05-09, a window of roughly 14 years.

Enforcement detail

OSHA Inspection History

Total Inspections

18

First Inspection

2010-02-02

Last Inspection

2024-05-09

Inspection Span

14 yrs

Violations / Inspection

2.6

Avg Penalty / Inspection

$7,224

Industry Avg / Inspection

$6,092

What this shows 18 inspections over 14 years, averaging 2.6 violations per visit. That's $7,224 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

36

Serious

76.6% of total

0

Willful

0.0% of total

2

Repeat

4.3% of total

9

Other-Than-Serious

19.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$278,306

Current Penalty Amount

$130,028

Penalty Reduction

53.3%

What this shows Penalties were reduced by $148,278 from the initial assessment of $278,306. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Core Molding Technologies, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Core Molding Technologies, INC. Industry Avg
Inspections 18 2.5
Violations 47 7.8
Total Penalty $130,028 $15,410
Avg Penalty per Inspection $7,224 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Tifton Aluminum Extrusions, INC.
Tifton, GA
6 inspections $129,998
The J.J. Ryan Corporation Rex Forge Division
Plantsville, CT
7 inspections $129,923
Avila's Tile and Cabinets
Tulare, CA
0 inspections $0
Damoa Apparel, Inc
Los Angeles, CA
0 inspections $0
Hussmann Corporation
Bridgeton, MO
12 inspections $130,276

Compare Core Molding Technologies, INC. vs Tifton Aluminum Extrusions, INC. side-by-side →

Frequently Asked Questions

Is Core Molding Technologies, INC. safe to work at? ▼
Based on OSHA records, Core Molding Technologies, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 47 violations across 18 inspections, including 36 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Core Molding Technologies, INC. have? ▼
Core Molding Technologies, INC. has 47 OSHA violations on record, including 36 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $130,028.
How many OSHA inspections has Core Molding Technologies, INC. had? ▼
Core Molding Technologies, INC. has had 18 OSHA inspections, with the first recorded on 2010-02-02 and the most recent on 2024-05-09. This averages 2.6 violations per inspection.
What is the total penalty amount for Core Molding Technologies, INC.? ▼
Core Molding Technologies, INC. has been assessed $130,028 in current OSHA penalties, reduced from an initial assessment of $278,306 (a 53.3% reduction).
Does Core Molding Technologies, INC. have any serious or willful violations? ▼
Yes. Core Molding Technologies, INC. has 36 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Core Molding Technologies, INC. operate in? ▼
Core Molding Technologies, INC. operates in the Manufacturing sector (NAICS code 326199). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Core Molding Technologies, INC.'s safety record compare to industry average? ▼
Core Molding Technologies, INC.'s total OSHA penalty of $130,028 is above the Manufacturing industry average of $15,410 per employer (8.4x the average). The employer has 18 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Avila's Tile and Cabinets in Tulare, CA is a similar manufacturing employer with $0 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in OH

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Core Molding Technologies, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 18 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.