PlainWorker
Employers › GA

Manufacturing · Tifton, GA

Tifton Aluminum Extrusions, INC.

According to OSHA enforcement records (2010–2026), Tifton Aluminum Extrusions, INC. ranks #1,143 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 36 violations across 6 inspections.

Top 1% by penalty75% serious
$129,998
OSHA penalties
36
Violations cited
6
OSHA inspections
#1,143
of 99,447 penalized employers

Tifton Aluminum Extrusions, INC. in Tifton, GA has been the subject of 6 OSHA workplace inspections and 36 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $129,998. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tifton Aluminum Extrusions, INC. 6 times over 6 years, roughly annually. These inspections resulted in 36 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #1,143 of 99,447 penalized U.S. employers (the top 1% of penalized employers nationally). Of these, 27 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.3x the sector average) on inspection frequency. For comparison, Damoa Apparel, Inc in Los Angeles, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

6.0
violations per inspection
75.0%
of violations were serious
#1,143
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 36 violations across 6 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tifton Aluminum Extrusions, INC. runs far above peers (8.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$129,998 Bottom 1% least affordable more affordable than 1% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($129,998) is well above this band, the chart's rightmost open-ended bucket. This employer: $129,998 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tifton Aluminum Extrusions, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both6.06.066.06.04.219.835.551.266.8OSHA inspectionsViolations citedHAIER US APPLIANCE S…, OSHA inspections: 6 · Violations cited: 7MOUNTAIN COUNTRY FOO…, OSHA inspections: 6 · Violations cited: 14PRIDGEON & CLAY INC, OSHA inspections: 6 · Violations cited: 64PURSE SEINE SAMOA, I…, OSHA inspections: 6 · Violations cited: 9PREMIUM CONTRACTOR S…, OSHA inspections: 6 · Violations cited: 18FECON, LLC, OSHA inspections: 6 · Violations cited: 9BLOUGH INC, OSHA inspections: 6 · Violations cited: 38GREAT NORTHERN CORPO…, OSHA inspections: 6 · Violations cited: 7BEVCO, OSHA inspections: 6 · Violations cited: 17SOFTEX PAPER, INC., OSHA inspections: 6 · Violations cited: 9ARTIFLEX MANUFACTURING, OSHA inspections: 6 · Violations cited: 8COMPOSITE TECHNOLOGI…, OSHA inspections: 6 · Violations cited: 19HEARTHSIDE FOOD SOLU…, OSHA inspections: 6 · Violations cited: 14WEST LIBERTY FOODS, …, OSHA inspections: 6 · Violations cited: 14STEUBEN FOODS, INCOR…, OSHA inspections: 6 · Violations cited: 14RANTOUL FOODS, OSHA inspections: 6 · Violations cited: 10CONTINENTAL CASTING …, OSHA inspections: 6 · Violations cited: 16PASADENA SKID & PALL…, OSHA inspections: 6 · Violations cited: 11YILDIZ ENTEGRE USA, …, OSHA inspections: 6 · Violations cited: 21AUTO CAST INC, OSHA inspections: 6 · Violations cited: 59Tifton Aluminum Extr…, OSHA inspections: 6 · Violations cited: 36
Tifton Aluminum Extrusions, INC. has 6 OSHA inspections on record and 36 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tifton Aluminum Extrusions, INC. in the Manufacturing enforcement ledger

In Manufacturing, Tifton Aluminum Extrusions, INC. sits at penalty rank #636 of 35,243 penalized establishments ($129,998 assessed).

How Tifton Aluminum Extrusions, INC. Compares

Tifton Aluminum Extrusions, INC.'s 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs far above peers (8.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2013-08-21

Last Inspection

2019-04-30

Inspection Span

6 yrs

Violations / Inspection

6.0

Avg Penalty / Inspection

$21,666

Industry Avg / Inspection

$6,093

What this shows 6 inspections over 6 years, averaging 6.0 violations per visit. That's $21,666 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

27

Serious

75.0% of total

0

Willful

0.0% of total

2

Repeat

5.6% of total

7

Other-Than-Serious

19.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$181,543

Current Penalty Amount

$129,998

Penalty Reduction

28.4%

What this shows Penalties were reduced by $51,545 from the initial assessment of $181,543. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tifton Aluminum Extrusions, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tifton Aluminum Extrusions, INC. Industry Avg
Inspections 6 2.6
Violations 36 8.0
Total Penalty $129,998 $15,763
Avg Penalty per Inspection $21,666 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tifton Aluminum Extrusions, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($129,998 here).

Core Molding Technologies, INC. $130,028 OH The J.J. Ryan Corporation Rex Forge Division $129,923 CT Hussmann Corporation $130,276 MO Dci, INC. $129,700 NH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (6 inspections here).

Haier US Appliance Solutions, INC. 6 insp. Decatur, AL Mountain Country Foods LLC 6 insp. Spanish Fork, UT Pridgeon & Clay INC 6 insp. Grand Rapids, MI Purse Seine Samoa, INC. 6 insp. Pago Pago, AS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Core Molding Technologies, INC.
Columbus, OH
18 inspections $130,028
The J.J. Ryan Corporation Rex Forge Division
Plantsville, CT
7 inspections $129,923
Avila's Tile and Cabinets
Tulare, CA
0 inspections $0
Damoa Apparel, Inc
Los Angeles, CA
0 inspections $0
Hussmann Corporation
Bridgeton, MO
12 inspections $130,276

Compare Tifton Aluminum Extrusions, INC. vs Core Molding Technologies, INC. side-by-side →

What to do with this record

Use Tifton Aluminum Extrusions, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tifton Aluminum Extrusions, INC. against Core Molding Technologies, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tifton Aluminum Extrusions, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tifton Aluminum Extrusions, INC. safe to work at? ▼
Based on OSHA records, Tifton Aluminum Extrusions, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 36 violations across 6 inspections, including 27 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tifton Aluminum Extrusions, INC. have? ▼
Tifton Aluminum Extrusions, INC. has 36 OSHA violations on record, including 27 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $129,998.
How many OSHA inspections has Tifton Aluminum Extrusions, INC. had? ▼
Tifton Aluminum Extrusions, INC. has had 6 OSHA inspections, with the first recorded on 2013-08-21 and the most recent on 2019-04-30. This averages 6.0 violations per inspection.
What is the total penalty amount for Tifton Aluminum Extrusions, INC.? ▼
Tifton Aluminum Extrusions, INC. has been assessed $129,998 in current OSHA penalties, reduced from an initial assessment of $181,543 (a 28.4% reduction).
Does Tifton Aluminum Extrusions, INC. have any serious or willful violations? ▼
Yes. Tifton Aluminum Extrusions, INC. has 27 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tifton Aluminum Extrusions, INC. operate in? ▼
Tifton Aluminum Extrusions, INC. operates in the Manufacturing sector (NAICS code 331319). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tifton Aluminum Extrusions, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tifton Aluminum Extrusions, INC. ranks #1,143 (the top 1% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tifton Aluminum Extrusions, INC.'s safety record compare to industry average? ▼
Tifton Aluminum Extrusions, INC.'s total OSHA penalty of $129,998 is above the Manufacturing industry average of $15,763 per employer (8.2x the average). The employer has 6 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Damoa Apparel, Inc in Los Angeles, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.