PlainWorker
Employers › GA

Manufacturing · Austell, GA

Metal Specialist INC.

According to OSHA enforcement records (2010–2026), Metal Specialist INC. has a concerning safety record: 11 violations across 2 inspections. See the full breakdown below.

Upper half by penalty45% serious
$12,810
OSHA penalties
11
Violations cited
2
OSHA inspections
#28,336
of 100,495 penalized employers

Metal Specialist INC. in Austell, GA has been the subject of 2 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,810. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Metal Specialist INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 11 violations, averaging 5.5 per inspection - a notably high rate. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Miami Valley Polishing L.L.C. in Piqua, OH is another manufacturing employer with 3 OSHA inspections on record and $12,808 in current penalties.

5.5
violations per inspection
45.5%
of violations were serious
72%
of penalized employers rank lower

How Metal Specialist INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Metal Specialist INC. sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,810 Bottom 28% least affordable more affordable than 28% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Metal Specialist INC.

The federal enforcement record for Metal Specialist INC. in Austell, GA includes 2 OSHA inspections and 11 violations, translating to 5.50 violations per inspection. Of those violations, 5 (45.5%) were classified as serious, 0 (0.0%) as willful, and 2 (18.2%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $22,800 in initial penalties against this employer, later adjusted to a current total of $12,810 - a 43.8% reduction. Average penalty per inspection works out to $6,405. Against the Manufacturing industry average of $15,410 per employer, this record sits roughly in line with peers (0.8x the sector average).

Inspection activity spans from 2011-01-21 to 2011-02-02, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-01-21

Last Inspection

2011-02-02

Inspection Span

1 yr

Violations / Inspection

5.5

Avg Penalty / Inspection

$6,405

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 5.5 violations per visit. That's $6,405 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

5

Serious

45.5% of total

0

Willful

0.0% of total

2

Repeat

18.2% of total

4

Other-Than-Serious

36.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$22,800

Current Penalty Amount

$12,810

Penalty Reduction

43.8%

What this shows Penalties were reduced by $9,990 from the initial assessment of $22,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Metal Specialist INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Metal Specialist INC. Industry Avg
Inspections 2 2.5
Violations 11 7.8
Total Penalty $12,810 $15,410
Avg Penalty per Inspection $6,405 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Universal Coating INC
Flint, MI
9 inspections $12,810
Southern Truss Companies INC.
Fort Pierce, FL
3 inspections $12,810
Aloha State Sales (Sharp 29 Corp.)
Honolulu, HI
0 inspections $0
Nissin Foods (USA) CO., INC.
Lancaster, PA
2 inspections $12,809
Miami Valley Polishing L.L.C.
Piqua, OH
3 inspections $12,808

Compare Metal Specialist INC. vs Universal Coating INC side-by-side →

Frequently Asked Questions

Is Metal Specialist INC. safe to work at? ▼
Based on OSHA records, Metal Specialist INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 2 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Metal Specialist INC. have? ▼
Metal Specialist INC. has 11 OSHA violations on record, including 5 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $12,810.
How many OSHA inspections has Metal Specialist INC. had? ▼
Metal Specialist INC. has had 2 OSHA inspections, with the first recorded on 2011-01-21 and the most recent on 2011-02-02. This averages 5.5 violations per inspection.
What is the total penalty amount for Metal Specialist INC.? ▼
Metal Specialist INC. has been assessed $12,810 in current OSHA penalties, reduced from an initial assessment of $22,800 (a 43.8% reduction).
Does Metal Specialist INC. have any serious or willful violations? ▼
Yes. Metal Specialist INC. has 5 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Metal Specialist INC. operate in? ▼
Metal Specialist INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Metal Specialist INC.'s safety record compare to industry average? ▼
Metal Specialist INC.'s total OSHA penalty of $12,810 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Miami Valley Polishing L.L.C. in Piqua, OH is a similar manufacturing employer with $12,808 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in GA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Metal Specialist INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.