Manufacturing · Ravenswood, WV

Constellium Rolled Products

According to OSHA enforcement records (2010–2026), Constellium Rolled Products has a relatively clean safety record: 4 violations across 4 inspections. See the full breakdown below.

25% serious
$0
OSHA penalties
4
Violations cited
4
OSHA inspections

Constellium Rolled Products in Ravenswood, WV has been the subject of 4 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Constellium Rolled Products 4 times over 2 years - more than twice a year on average. These inspections resulted in 4 violations, averaging 1.0 per inspection. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, NC Stone in San Jose, CA is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

1.0
violations per inspection
25.0%
of violations were serious

Compliance score

C 75/100
  • C OSHA safety compliance: 4 violations across 4 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Constellium Rolled Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0013.627.340.954.5OSHA inspectionsViolations citedFOUNDATION FOOD GROU…, OSHA inspections: 4 · Violations cited: 52P J MURPHY FOREST PR…, OSHA inspections: 4 · Violations cited: 34CABKA NORTH AMERICA, OSHA inspections: 4 · Violations cited: 39MARINE GROUP BOAT WO…, OSHA inspections: 4 · Violations cited: 9WORTHEN COATED FABRICS, OSHA inspections: 4 · Violations cited: 11CORE SOLUTIONS INC, OSHA inspections: 4 · Violations cited: 11VSS COUNTERTOPS, INC., OSHA inspections: 4 · Violations cited: 14CROSS CONTAINER CORP…, OSHA inspections: 4 · Violations cited: 6SCHUFF STEEL COMPANY, OSHA inspections: 4 · Violations cited: 8NEWCO INDUSTRIES LLC…, OSHA inspections: 4 · Violations cited: 16DAK PLASTICS, INC., OSHA inspections: 4 · Violations cited: 11LOADMASTER CORPORATION, OSHA inspections: 4 · Violations cited: 6BRONCO WINE COMPANY,…, OSHA inspections: 4 · Violations cited: 9L & W FAB & MACHINE,…, OSHA inspections: 4 · Violations cited: 17TERCAT TOOL AND DIE …, OSHA inspections: 4 · Violations cited: 7LANNON TANK COMPANY,…, OSHA inspections: 4 · Violations cited: 6CAINS FOODS, LP, OSHA inspections: 4 · Violations cited: 16BAE SYSTEMS, OSHA inspections: 4 · Violations cited: 7MONDELEZ GLOBAL, LLC, OSHA inspections: 4 · Violations cited: 2TIENERGY, LLC, OSHA inspections: 4 · Violations cited: 17Constellium Rolled P…, OSHA inspections: 4 · Violations cited: 4
Constellium Rolled Products has 4 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Constellium Rolled Products Compares

Constellium Rolled Products's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Constellium Rolled Products to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2012-08-23

Last Inspection

2014-06-04

Inspection Span

2 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 2 years, averaging 1.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Industry Safety Context: Manufacturing

How Constellium Rolled Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Constellium Rolled Products Industry Avg
Inspections 4 2.6
Violations 4 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Constellium Rolled Products, both outside WV so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Constellium Rolled Products vs Meta Manufacturing Corporation side-by-side →

What to do with this record

Use Constellium Rolled Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Constellium Rolled Products against Meta Manufacturing Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Constellium Rolled Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Constellium Rolled Products safe to work at?
Based on OSHA records, Constellium Rolled Products's workplace safety record is relatively clean, with fewer violations than typical. The employer has 4 violations across 4 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Constellium Rolled Products have?
Constellium Rolled Products has 4 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Constellium Rolled Products had?
Constellium Rolled Products has had 4 OSHA inspections, with the first recorded on 2012-08-23 and the most recent on 2014-06-04. This averages 1.0 violations per inspection.
What is the total penalty amount for Constellium Rolled Products?
Constellium Rolled Products has been assessed $0 in current OSHA penalties, reduced from an initial assessment of $8,000 (a 100.0% reduction).
Does Constellium Rolled Products have any serious or willful violations?
Yes. Constellium Rolled Products has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Constellium Rolled Products operate in?
Constellium Rolled Products operates in the Manufacturing sector (NAICS code 331315). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Constellium Rolled Products's safety record compare to industry average?
Constellium Rolled Products's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, NC Stone in San Jose, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.