PlainWorker
Employers › IL

Manufacturing · Wheeling, IL

R.C.M. Industries, INC. DBA Inland Die Casting Company

According to OSHA enforcement records (2010–2026), R.C.M. Industries, INC. DBA Inland Die Casting Company ranks #46,647 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 3 violations across 2 inspections.

Upper half by penalty67% serious
$6,800
OSHA penalties
3
Violations cited
2
OSHA inspections
#46,647
of 99,447 penalized employers

R.C.M. Industries, INC. DBA Inland Die Casting Company in Wheeling, IL has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected R.C.M. Industries, INC. DBA Inland Die Casting Company 2 times over 2 years, roughly annually. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #46,647 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, A.M. Precision Machining, INC. in Elk Grove Village, IL is another manufacturing employer with 5 OSHA inspections on record and $6,800 in current penalties.

1.5
violations per inspection
66.7%
of violations were serious
#46,647
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows R.C.M. Industries, INC. DBA Inland Die Casting Company runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,800 Bottom 47% least affordable more affordable than 47% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is R.C.M. Industries, INC. DBA Inland Die Casting Company.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0010.220.430.740.9OSHA inspectionsViolations citedNEXTEEL SAHA, LLC, OSHA inspections: 2 · Violations cited: 27REMINGTON ARMS COMPA…, OSHA inspections: 2 · Violations cited: 39AGILEX FLAVORS & FRA…, OSHA inspections: 2 · Violations cited: 18REPUBLIC ENGINEERED …, OSHA inspections: 2 · Violations cited: 6NIKKISO CRYO, INC., OSHA inspections: 2 · Violations cited: 1ADVANCE PAPER BOX CO…, OSHA inspections: 2 · Violations cited: 6JUNIPER ELBOW CO., I…, OSHA inspections: 2 · Violations cited: 19MATT BREWING COMPANY…, OSHA inspections: 2 · Violations cited: 10DEBAUFRE BAKERIES INC, OSHA inspections: 2 · Violations cited: 23MIL-SPEC PACKAGING O…, OSHA inspections: 2 · Violations cited: 11DIAMOND SPAS, INC., OSHA inspections: 2 · Violations cited: 12SOUTHWARK METAL MANU…, OSHA inspections: 2 · Violations cited: 4CHEMIPLASTICA, INC., OSHA inspections: 2 · Violations cited: 12J.H. ROUTH PACKING C…, OSHA inspections: 2 · Violations cited: 6PACTIV CORPORATION, OSHA inspections: 2 · Violations cited: 5TOOL SYSTEMS, INC., OSHA inspections: 2 · Violations cited: 22CENTURION INDUSTRIES…, OSHA inspections: 2 · Violations cited: 3MAC LTT STAINLESS DI…, OSHA inspections: 2 · Violations cited: 31ORNUA (WHITEHALL) IN…, OSHA inspections: 2 · Violations cited: 8FRANKLIN INTERNATION…, OSHA inspections: 2 · Violations cited: 3R.C.M. Industries, I…, OSHA inspections: 2 · Violations cited: 3
R.C.M. Industries, INC. DBA Inland Die Casting Company has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

R.C.M. Industries, INC. DBA Inland Die Casting Company in the Manufacturing enforcement ledger

Manufacturing sector: R.C.M. Industries, INC. DBA Inland Die Casting Company is the #20,107 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($6,800).

How R.C.M. Industries, INC. DBA Inland Die Casting Company Compares

R.C.M. Industries, INC. DBA Inland Die Casting Company's 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-07-28

Last Inspection

2017-03-08

Inspection Span

2 yrs

Violations / Inspection

1.5

Avg Penalty / Inspection

$3,400

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 1.5 violations per visit. That's $3,400 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$10,432

Current Penalty Amount

$6,800

Penalty Reduction

34.8%

What this shows Penalties were reduced by $3,632 from the initial assessment of $10,432. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How R.C.M. Industries, INC. DBA Inland Die Casting Company compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric R.C.M. Industries, INC. DBA Inland Die Casting Company Industry Avg
Inspections 2 2.6
Violations 3 8.0
Total Penalty $6,800 $15,763
Avg Penalty per Inspection $3,400 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for R.C.M. Industries, INC. DBA Inland Die Casting Company, both outside IL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,800 here).

Personal Touch Countertops $6,800 FL Ask Foods, INC. $6,800 PA Tac Manufacturing INC $6,800 MI MPP CORP $6,800 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nexteel Saha, LLC 2 insp. Crosby, TX Remington Arms Company, LLC 2 insp. Ilion, NY Agilex Flavors & Fragrances INC 2 insp. Rancho Santa Margarita, CA Republic Engineered Products 2 insp. Canton, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

A.M. Precision Machining, INC.
Elk Grove Village, IL
5 inspections $6,800
Ask Foods, INC.
Palmyra, PA
3 inspections $6,800
Tac Manufacturing INC
Jackson, MI
5 inspections $6,800
MPP CORP
Kimball, MI
2 inspections $6,800
Handy Wacks Corporation
Sparta, MI
2 inspections $6,800

Compare R.C.M. Industries, INC. DBA Inland Die Casting Company vs A.M. Precision Machining, INC. side-by-side →

What to do with this record

Use R.C.M. Industries, INC. DBA Inland Die Casting Company's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare R.C.M. Industries, INC. DBA Inland Die Casting Company against A.M. Precision Machining, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether R.C.M. Industries, INC. DBA Inland Die Casting Company's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is R.C.M. Industries, INC. DBA Inland Die Casting Company safe to work at? ▼
Based on OSHA records, R.C.M. Industries, INC. DBA Inland Die Casting Company's workplace safety record is average, with typical for this industry. The employer has 3 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does R.C.M. Industries, INC. DBA Inland Die Casting Company have? ▼
R.C.M. Industries, INC. DBA Inland Die Casting Company has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,800.
How many OSHA inspections has R.C.M. Industries, INC. DBA Inland Die Casting Company had? ▼
R.C.M. Industries, INC. DBA Inland Die Casting Company has had 2 OSHA inspections, with the first recorded on 2015-07-28 and the most recent on 2017-03-08. This averages 1.5 violations per inspection.
What is the total penalty amount for R.C.M. Industries, INC. DBA Inland Die Casting Company? ▼
R.C.M. Industries, INC. DBA Inland Die Casting Company has been assessed $6,800 in current OSHA penalties, reduced from an initial assessment of $10,432 (a 34.8% reduction).
Does R.C.M. Industries, INC. DBA Inland Die Casting Company have any serious or willful violations? ▼
Yes. R.C.M. Industries, INC. DBA Inland Die Casting Company has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does R.C.M. Industries, INC. DBA Inland Die Casting Company operate in? ▼
R.C.M. Industries, INC. DBA Inland Die Casting Company operates in the Manufacturing sector (NAICS code 331521). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does R.C.M. Industries, INC. DBA Inland Die Casting Company rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, R.C.M. Industries, INC. DBA Inland Die Casting Company ranks #46,647 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does R.C.M. Industries, INC. DBA Inland Die Casting Company's safety record compare to industry average? ▼
R.C.M. Industries, INC. DBA Inland Die Casting Company's total OSHA penalty of $6,800 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, A.M. Precision Machining, INC. in Elk Grove Village, IL is a similar manufacturing employer with $6,800 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.