PlainWorker
Employers › IL

Manufacturing · Elk Grove Village, IL

A.M. Precision Machining, INC.

According to OSHA enforcement records (2010–2026), A.M. Precision Machining, INC. ranks #46,647 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 14 violations across 5 inspections.

Upper half by penalty50% serious
$6,800
OSHA penalties
14
Violations cited
5
OSHA inspections
#46,647
of 99,447 penalized employers

A.M. Precision Machining, INC. in Elk Grove Village, IL has been the subject of 5 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on A.M. Precision Machining, INC.: 5 inspections in 1 year, several times a year. These inspections resulted in 14 violations, averaging 2.8 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #46,647 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.9x the sector average) on inspection frequency. For comparison, Jamison Door Company in Hagerstown, MD is another manufacturing employer with 2 OSHA inspections on record and $6,800 in current penalties.

2.8
violations per inspection
50.0%
of violations were serious
#46,647
of 99,447 penalized employers

Compliance score

F 49/100
  • F OSHA safety compliance: 14 violations across 5 OSHA inspections (2.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How A.M. Precision Machining, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows A.M. Precision Machining, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,800 Bottom 47% least affordable more affordable than 47% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is A.M. Precision Machining, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.00.818.43653.671.2OSHA inspectionsViolations citedSIMS-LOHMAN, INC., OSHA inspections: 5 · Violations cited: 15STAMPCOAT, INC., OSHA inspections: 5 · Violations cited: 68DARLING INGREDIENTS,…, OSHA inspections: 5 · Violations cited: 10HOLMES FOODS, INC., OSHA inspections: 5 · Violations cited: 10TEXAS CONCRETE PARTN…, OSHA inspections: 5 · Violations cited: 25EXIDE TECHNOLOGIES, OSHA inspections: 5 · Violations cited: 4UNITED ALLOY, INC., OSHA inspections: 5 · Violations cited: 12BEF FOODS, INC., OSHA inspections: 5 · Violations cited: 5DOLESE BROTHERS COMP…, OSHA inspections: 5 · Violations cited: 7OHIO STEEL INDUSTRIE…, OSHA inspections: 5 · Violations cited: 6WENZEL METAL SPINNIN…, OSHA inspections: 5 · Violations cited: 11CROUNSE CORPORATION, OSHA inspections: 5 · Violations cited: 19AIR MOVEMENT, INC, OSHA inspections: 5 · Violations cited: 17BRANDON IRON, INC., OSHA inspections: 5 · Violations cited: 10MUNOT PLASTICS, INC., OSHA inspections: 5 · Violations cited: 10REX LUMBER, TROY, LLC, OSHA inspections: 5 · Violations cited: 11UPSTATE NIAGARA COOP…, OSHA inspections: 5 · Violations cited: 17NOAH'S ARK PROCESSOR…, OSHA inspections: 5 · Violations cited: 28JBS USA, LLC, OSHA inspections: 5 · Violations cited: 29CURT MANUFACTURING, …, OSHA inspections: 5 · Violations cited: 16A.M. Precision Machi…, OSHA inspections: 5 · Violations cited: 14
A.M. Precision Machining, INC. has 5 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

A.M. Precision Machining, INC. in the Manufacturing enforcement ledger

In Manufacturing, A.M. Precision Machining, INC. sits at penalty rank #20,107 of 35,243 penalized establishments ($6,800 assessed).

How A.M. Precision Machining, INC. Compares

A.M. Precision Machining, INC.'s 2.80 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2013-07-09

Last Inspection

2014-01-28

Inspection Span

1 yr

Violations / Inspection

2.8

Avg Penalty / Inspection

$1,360

Industry Avg / Inspection

$6,093

What this shows 5 inspections over 1 year, averaging 2.8 violations per visit. That's $1,360 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$10,000

Current Penalty Amount

$6,800

Penalty Reduction

32.0%

What this shows Penalties were reduced by $3,200 from the initial assessment of $10,000. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How A.M. Precision Machining, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric A.M. Precision Machining, INC. Industry Avg
Inspections 5 2.6
Violations 14 8.0
Total Penalty $6,800 $15,763
Avg Penalty per Inspection $1,360 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for A.M. Precision Machining, INC., both outside IL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,800 here).

Vision Web Press, Incorporated $6,800 GA Airbagit.Com Suspension LLC $6,800 AZ Josh Rickman $6,800 AL Jamison Door Company $6,800 MD

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

Sims-Lohman, INC. 5 insp. Cincinnati, OH Stampcoat, INC. 5 insp. El Paso, TX Darling Ingredients, INC. 5 insp. Byram, MS Holmes Foods, INC. 5 insp. Nixon, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

R.C.M. Industries, INC. DBA Inland Die Casting Company
Wheeling, IL
2 inspections $6,800
Josh Rickman
Florence, AL
6 inspections $6,800
Jamison Door Company
Hagerstown, MD
2 inspections $6,800
Norampac NYC INC.
Maspeth, NY
2 inspections $6,800
Swiss Woodcraft, INC.
Rittman, OH
2 inspections $6,800

Compare A.M. Precision Machining, INC. vs R.C.M. Industries, INC. DBA Inland Die Casting Company side-by-side →

What to do with this record

Use A.M. Precision Machining, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare A.M. Precision Machining, INC. against R.C.M. Industries, INC. DBA Inland Die Casting Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether A.M. Precision Machining, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is A.M. Precision Machining, INC. safe to work at? ▼
Based on OSHA records, A.M. Precision Machining, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 14 violations across 5 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does A.M. Precision Machining, INC. have? ▼
A.M. Precision Machining, INC. has 14 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,800.
How many OSHA inspections has A.M. Precision Machining, INC. had? ▼
A.M. Precision Machining, INC. has had 5 OSHA inspections, with the first recorded on 2013-07-09 and the most recent on 2014-01-28. This averages 2.8 violations per inspection.
What is the total penalty amount for A.M. Precision Machining, INC.? ▼
A.M. Precision Machining, INC. has been assessed $6,800 in current OSHA penalties, reduced from an initial assessment of $10,000 (a 32.0% reduction).
Does A.M. Precision Machining, INC. have any serious or willful violations? ▼
Yes. A.M. Precision Machining, INC. has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does A.M. Precision Machining, INC. operate in? ▼
A.M. Precision Machining, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does A.M. Precision Machining, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, A.M. Precision Machining, INC. ranks #46,647 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does A.M. Precision Machining, INC.'s safety record compare to industry average? ▼
A.M. Precision Machining, INC.'s total OSHA penalty of $6,800 is below the Manufacturing industry average of $15,763 per employer. The employer has 5 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Jamison Door Company in Hagerstown, MD is a similar manufacturing employer with $6,800 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.