PlainWorker
Employers › IA

Manufacturing · Ackley, IA

Iowa Steel Masters

According to OSHA enforcement records (2010–2026), Iowa Steel Masters has a mixed safety record: 2 violations across 1 inspections. See the full breakdown below.

Lower half by penalty0% serious
$158
OSHA penalties
2
Violations cited
1
OSHA inspections
$36,875
Back wages owed

Iowa Steel Masters in Ackley, IA has been the subject of 1 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $158. Separately, the Department of Labor's Wage and Hour Division found $36,875 in back wages owed to 15 affected workers. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Iowa Steel Masters once. These inspections resulted in 2 violations, averaging 2.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.4x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $36,875 in back wages owed to 15 affected workers. For comparison, Consolidated Fabricators CORP. in Galt, CA is another manufacturing employer with 2 OSHA inspections on record and $37,040 in current penalties.

2.0
violations per inspection
0.0%
of violations were serious
1%
of penalized employers rank lower
$36,875
in back wages recovered

How Iowa Steel Masters compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Iowa Steel Masters runs well below peers (0.01x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$158 Top 1% most affordable more affordable than 99% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Iowa Steel Masters

The federal enforcement record for Iowa Steel Masters in Ackley, IA includes 1 OSHA inspection and 2 violations, translating to 2.00 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat.

OSHA assessed $315 in initial penalties against this employer, later adjusted to a current total of $158 - a 49.8% reduction. Average penalty per inspection works out to $158. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.01x the sector average). The Wage and Hour Division added 1 case producing $36,875 in back wages owed to 15 affected workers.

Inspection activity spans from 2019-06-18 to 2019-06-18, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

1

First Inspection

2019-06-18

Last Inspection

2019-06-18

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$158

Industry Avg / Inspection

$6,092

What this shows 1 inspection over 1 year, averaging 2.0 violations per visit. That's $158 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$315

Current Penalty Amount

$158

Penalty Reduction

49.8%

Combined Impact (OSHA + WHD)

$37,033

What this shows Penalties were reduced by $157 from the initial assessment of $315. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$36,875
Employees Affected
15
WHD Violations
19
Avg Back Wages per Employee
$2,458
Avg Back Wages per Case
$36,875

The Department of Labor's Wage and Hour Division found that Iowa Steel Masters owed $36,875 in back wages to 15 employees across 1 case and 19 violations. WHD enforces federal labor laws including the Fair Labor Standards Act (FLSA), covering minimum wage, overtime pay, and child labor standards.

Industry Safety Context: Manufacturing

How Iowa Steel Masters compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Iowa Steel Masters Industry Avg
Inspections 1 2.5
Violations 2 7.8
Total Penalty $158 $15,410
Avg Penalty per Inspection $158 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Sierra Pacific Industries
Burney, CA
6 inspections $37,035
Pleasant Mattress Incorporated
Fresno, CA
4 inspections $37,030
Consolidated Fabricators CORP.
Galt, CA
2 inspections $37,040
BHL Trim
Los Angeles, CA
0 inspections $0
Knauf Insulation, INC
Lanett, AL
3 inspections $37,022

Compare Iowa Steel Masters vs Sierra Pacific Industries side-by-side →

Frequently Asked Questions

Is Iowa Steel Masters safe to work at? ▼
Based on OSHA records, Iowa Steel Masters's workplace safety record is mixed, with some compliance concerns. The employer has 2 violations across 1 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Iowa Steel Masters have? ▼
Iowa Steel Masters has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $158.
How many OSHA inspections has Iowa Steel Masters had? ▼
Iowa Steel Masters has had 1 OSHA inspections, with the first recorded on 2019-06-18 and the most recent on 2019-06-18. This averages 2.0 violations per inspection.
What is the total penalty amount for Iowa Steel Masters? ▼
Iowa Steel Masters has been assessed $158 in current OSHA penalties, reduced from an initial assessment of $315 (a 49.8% reduction). Additionally, $36,875 in back wages were owed through WHD enforcement.
Has Iowa Steel Masters been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Iowa Steel Masters, resulting in $36,875 in back wages owed to 15 affected workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Iowa Steel Masters operate in? ▼
Iowa Steel Masters operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Iowa Steel Masters owes me wages? ▼
If you believe Iowa Steel Masters owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $36,875 in back wages owed by this employer across 1 case.
How does Iowa Steel Masters's safety record compare to industry average? ▼
Iowa Steel Masters's total OSHA penalty of $158 is below the Manufacturing industry average of $15,410 per employer. The employer has 1 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Consolidated Fabricators CORP. in Galt, CA is a similar manufacturing employer with $37,040 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in IA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Iowa Steel Masters's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 1 inspection on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.