PlainWorker
Employers › PA

Manufacturing · Red Lion, PA

Hoffman Die Casting Technology

According to OSHA enforcement records (2010–2026), Hoffman Die Casting Technology ranks #48,934 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Upper half by penalty100% serious
$6,251
OSHA penalties
2
Violations cited
2
OSHA inspections
#48,934
of 99,447 penalized employers

Hoffman Die Casting Technology in Red Lion, PA has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,251. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Hoffman Die Casting Technology 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #48,934 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Arkema Incorporated in Axis, AL is another manufacturing employer with 2 OSHA inspections on record and $6,251 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#48,934
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Hoffman Die Casting Technology compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Hoffman Die Casting Technology runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,251 Bottom 49% least affordable more affordable than 49% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Hoffman Die Casting Technology.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.124.136.248.2OSHA inspectionsViolations citedRED RIVER COMMODITIE…, OSHA inspections: 2 · Violations cited: 14TRINITY YACHTS, LLC, OSHA inspections: 2 · Violations cited: 23A.W.T. WORLD TRADE INC, OSHA inspections: 2 · Violations cited: 46DIMENSIONAL MACHINE …, OSHA inspections: 2 · Violations cited: 20WICO METAL PRODUCTS, OSHA inspections: 2 · Violations cited: 11TEXAS UNDERGROUND, I…, OSHA inspections: 2 · Violations cited: 22KOST USA LLC, OSHA inspections: 2 · Violations cited: 7DAY-LEE FOODS, INC., OSHA inspections: 2 · Violations cited: 5THE HARTY PRESS INC., OSHA inspections: 2 · Violations cited: 17BRITE BLAST LLC, OSHA inspections: 2 · Violations cited: 20IBC ENGINEERED MATER…, OSHA inspections: 2 · Violations cited: 20KDC ONE NORTHERN LABS, OSHA inspections: 2 · Violations cited: 6METALICO ALUMINUM RE…, OSHA inspections: 2 · Violations cited: 37ASCEND PERFORMANCE M…, OSHA inspections: 2 · Violations cited: 2THE BUCKEYE STAMPING…, OSHA inspections: 2 · Violations cited: 9JOHN BLUDWORTH SHIPY…, OSHA inspections: 2 · Violations cited: 9HUNTER DOUGLAS ARCHI…, OSHA inspections: 2 · Violations cited: 11CONSOLIDATED PRECISI…, OSHA inspections: 2 · Violations cited: 3ACCENT DISPLAY CORPO…, OSHA inspections: 2 · Violations cited: 20SADLER MACHINE CO INC, OSHA inspections: 2 · Violations cited: 7Hoffman Die Casting …, OSHA inspections: 2 · Violations cited: 2
Hoffman Die Casting Technology has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Hoffman Die Casting Technology in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Hoffman Die Casting Technology ranks #20,968 at $6,251 current penalty.

How Hoffman Die Casting Technology Compares

Hoffman Die Casting Technology's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-08-06

Last Inspection

2019-10-16

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$3,126

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $3,126 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,335

Current Penalty Amount

$6,251

Penalty Reduction

25.0%

What this shows Penalties were reduced by $2,084 from the initial assessment of $8,335. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Hoffman Die Casting Technology compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Hoffman Die Casting Technology Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $6,251 $15,763
Avg Penalty per Inspection $3,126 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Hoffman Die Casting Technology, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,251 here).

Arkema Incorporated $6,251 AL Amv, LLC $6,251 WI Northern Stamping, INC. $6,250 OH HI-Tech Mold & Tool, INC. $6,250 MA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Red River Commodities, INC. 2 insp. Fargo, ND Trinity Yachts, LLC 2 insp. Gulfport, MS A.W.T. World Trade INC 2 insp. Chicago, IL Dimensional Machine Works LLC 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Arkema Incorporated
Axis, AL
2 inspections $6,251
Amv, LLC
LA Crosse, WI
3 inspections $6,251
Rocky Mountain Steel INC.
Olathe, CO
4 inspections $6,250
Variety Die and Stamping Company
Dexter, MI
3 inspections $6,250
Superior Fabrication Company LLC
Kincheloe, MI
2 inspections $6,250

Compare Hoffman Die Casting Technology vs Arkema Incorporated side-by-side →

What to do with this record

Use Hoffman Die Casting Technology's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Hoffman Die Casting Technology against Arkema Incorporated, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Hoffman Die Casting Technology's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Hoffman Die Casting Technology safe to work at? ▼
Based on OSHA records, Hoffman Die Casting Technology's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Hoffman Die Casting Technology have? ▼
Hoffman Die Casting Technology has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,251.
How many OSHA inspections has Hoffman Die Casting Technology had? ▼
Hoffman Die Casting Technology has had 2 OSHA inspections, with the first recorded on 2019-08-06 and the most recent on 2019-10-16. This averages 1.0 violations per inspection.
What is the total penalty amount for Hoffman Die Casting Technology? ▼
Hoffman Die Casting Technology has been assessed $6,251 in current OSHA penalties, reduced from an initial assessment of $8,335 (a 25.0% reduction).
Does Hoffman Die Casting Technology have any serious or willful violations? ▼
Yes. Hoffman Die Casting Technology has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Hoffman Die Casting Technology operate in? ▼
Hoffman Die Casting Technology operates in the Manufacturing sector (NAICS code 331521). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Hoffman Die Casting Technology rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Hoffman Die Casting Technology ranks #48,934 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Hoffman Die Casting Technology's safety record compare to industry average? ▼
Hoffman Die Casting Technology's total OSHA penalty of $6,251 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Arkema Incorporated in Axis, AL is a similar manufacturing employer with $6,251 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.