PlainWorker
Employers › MA

Manufacturing · Pittsfield, MA

HI-Tech Mold & Tool, INC.

According to OSHA enforcement records (2010–2026), HI-Tech Mold & Tool, INC. ranks #48,996 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 3 inspections.

Upper half by penalty100% serious
$6,250
OSHA penalties
1
Violations cited
3
OSHA inspections
#48,996
of 99,447 penalized employers

HI-Tech Mold & Tool, INC. in Pittsfield, MA has been the subject of 3 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,250. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected HI-Tech Mold & Tool, INC. 3 times over 3 years, roughly annually. These inspections resulted in 1 violation, averaging 0.3 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #48,996 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Underwood Sheet Metal, INC. in Houston, TX is another manufacturing employer with 2 OSHA inspections on record and $6,250 in current penalties.

0.3
violations per inspection
100.0%
of violations were serious
#48,996
of 99,447 penalized employers

Compliance score

B 85/100
  • B OSHA safety compliance: 1 violation across 3 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How HI-Tech Mold & Tool, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows HI-Tech Mold & Tool, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,250 Bottom 49% least affordable more affordable than 49% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is HI-Tech Mold & Tool, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0013.426.840.153.5OSHA inspectionsViolations citedGT STONE GRANITE LLC, OSHA inspections: 3 · Violations cited: 27PORCELEN LIMITED CON…, OSHA inspections: 3 · Violations cited: 14BRENTWOOD ORIGINALS,…, OSHA inspections: 3 · Violations cited: 11SPARTECH PLASTICS, LLC, OSHA inspections: 3 · Violations cited: 23DARLING INGREDIENTS …, OSHA inspections: 3 · Violations cited: 14BLUE BELL MATTRESS C…, OSHA inspections: 3 · Violations cited: 24SPECIFIED PLATING CO., OSHA inspections: 3 · Violations cited: 21CLEVELAND DIE & MANU…, OSHA inspections: 3 · Violations cited: 6BADGER METAL FINISHI…, OSHA inspections: 3 · Violations cited: 25HAYASHI TELEMPU NORT…, OSHA inspections: 3 · Violations cited: 6HINKLE CHAIR COMPANY…, OSHA inspections: 3 · Violations cited: 51ARROWHEAD PRODUCTS C…, OSHA inspections: 3 · Violations cited: 7OSMUNDSON MANUFACTUR…, OSHA inspections: 3 · Violations cited: 26MILLER MANUFACTURING, OSHA inspections: 3 · Violations cited: 9PETERSON AMERICAN CO…, OSHA inspections: 3 · Violations cited: 7LIBERTY DUCT, LLC, OSHA inspections: 3 · Violations cited: 17WINSTON PLYWOOD & VE…, OSHA inspections: 3 · Violations cited: 4DUDEK & BOCK SPRING …, OSHA inspections: 3 · Violations cited: 2SUNRISE LUMBER COMPANY, OSHA inspections: 3 · Violations cited: 19MIDWEST SIGN COMPANY, OSHA inspections: 3 · Violations cited: 7HI-Tech Mold & Tool,…, OSHA inspections: 3 · Violations cited: 1
HI-Tech Mold & Tool, INC. has 3 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

HI-Tech Mold & Tool, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, HI-Tech Mold & Tool, INC. ranks #20,971 at $6,250 current penalty.

How HI-Tech Mold & Tool, INC. Compares

HI-Tech Mold & Tool, INC.'s 0.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-08-16

Last Inspection

2026-05-27

Inspection Span

3 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$2,083

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 3 years, averaging 0.3 violations per visit. That's $2,083 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,250

Current Penalty Amount

$6,250

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How HI-Tech Mold & Tool, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric HI-Tech Mold & Tool, INC. Industry Avg
Inspections 3 2.6
Violations 1 8.0
Total Penalty $6,250 $15,763
Avg Penalty per Inspection $2,083 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for HI-Tech Mold & Tool, INC., both outside MA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,250 here).

Southland Baking CO., INC. $6,250 TX Underwood Sheet Metal, INC. $6,250 TX Northern Stamping, INC. $6,250 OH Design Fabrications Incorporated $6,250 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

GT Stone Granite LLC 3 insp. Cartersville, GA Porcelen Limited Connecticut, LLC 3 insp. Hamden, CT Brentwood Originals, INC. 3 insp. Walls, MS Spartech Plastics, LLC 3 insp. Evanston, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Southland Baking CO., INC.
Houston, TX
2 inspections $6,250
Underwood Sheet Metal, INC.
Houston, TX
2 inspections $6,250
Smart Gladiator LLC
Atlanta, GA
0 inspections $0
Design Fabrications Incorporated
Madison Heights, MI
3 inspections $6,250
Cambium CORP.
Athol, MA
3 inspections $6,250

Compare HI-Tech Mold & Tool, INC. vs Southland Baking CO., INC. side-by-side →

What to do with this record

Use HI-Tech Mold & Tool, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare HI-Tech Mold & Tool, INC. against Southland Baking CO., INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether HI-Tech Mold & Tool, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is HI-Tech Mold & Tool, INC. safe to work at? ▼
Based on OSHA records, HI-Tech Mold & Tool, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 3 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does HI-Tech Mold & Tool, INC. have? ▼
HI-Tech Mold & Tool, INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,250.
How many OSHA inspections has HI-Tech Mold & Tool, INC. had? ▼
HI-Tech Mold & Tool, INC. has had 3 OSHA inspections, with the first recorded on 2023-08-16 and the most recent on 2026-05-27. This averages 0.3 violations per inspection.
What is the total penalty amount for HI-Tech Mold & Tool, INC.? ▼
HI-Tech Mold & Tool, INC. has been assessed $6,250 in current OSHA penalties.
Does HI-Tech Mold & Tool, INC. have any serious or willful violations? ▼
Yes. HI-Tech Mold & Tool, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does HI-Tech Mold & Tool, INC. operate in? ▼
HI-Tech Mold & Tool, INC. operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does HI-Tech Mold & Tool, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, HI-Tech Mold & Tool, INC. ranks #48,996 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does HI-Tech Mold & Tool, INC.'s safety record compare to industry average? ▼
HI-Tech Mold & Tool, INC.'s total OSHA penalty of $6,250 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Underwood Sheet Metal, INC. in Houston, TX is a similar manufacturing employer with $6,250 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.