PlainWorker
Employers › VA

Manufacturing · Newport News, VA

Craft and Technical Solutions, LLC

According to OSHA enforcement records (2010–2026), Craft and Technical Solutions, LLC has a relatively clean safety record: 2 violations across 2 inspections. See the full breakdown below.

100% serious
$0
OSHA penalties
2
Violations cited
2
OSHA inspections

Craft and Technical Solutions, LLC in Newport News, VA has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Craft and Technical Solutions, LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Supreme Meats INC in Saint Francis, WI is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Craft and Technical Solutions, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.210.120.029.939.8OSHA inspectionsViolations citedSILVER BAY SEAFOODS,…, OSHA inspections: 2 · Violations cited: 5PRECISION BUILD SOLU…, OSHA inspections: 2 · Violations cited: 7CARMEN CREATIVE CABI…, OSHA inspections: 2 · Violations cited: 38MEGLIO INTERIORS, LLC, OSHA inspections: 2 · Violations cited: 14WEST COAST IRON, INC., OSHA inspections: 2 · Violations cited: 12NITREX INC., OSHA inspections: 2 · Violations cited: 22GREATWIDE DISTRIBUTI…, OSHA inspections: 2 · Violations cited: 3ALLIED TUBE AND COND…, OSHA inspections: 2 · Violations cited: 16MASTERCRAFTERS, INC., OSHA inspections: 2 · Violations cited: 29COASTAL INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 15ASSONET INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 20BALDWIN FILTERS INC, OSHA inspections: 2 · Violations cited: 7MICROTECH KNIVES, INC., OSHA inspections: 2 · Violations cited: 24ROYAL INTERPACK NORT…, OSHA inspections: 2 · Violations cited: 11PIQUA CHAMPION FOUND…, OSHA inspections: 2 · Violations cited: 21THE EUCLID CHEMICAL …, OSHA inspections: 2 · Violations cited: 2B Y MARBLE INC, OSHA inspections: 2 · Violations cited: 10JV MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 3AJINOMOTO FOODS NORT…, OSHA inspections: 2 · Violations cited: 13NORTHERN WIND, INC., OSHA inspections: 2 · Violations cited: 9Craft and Technical …, OSHA inspections: 2 · Violations cited: 2
Craft and Technical Solutions, LLC has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Craft and Technical Solutions, LLC Compares

Craft and Technical Solutions, LLC's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Craft and Technical Solutions, LLC to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2023-04-25

Last Inspection

2024-01-29

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Industry Safety Context: Manufacturing

How Craft and Technical Solutions, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Craft and Technical Solutions, LLC Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Craft and Technical Solutions, LLC, both outside VA so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Silver Bay Seafoods, LLC 2 insp. False Pass, AK Precision Build Solutions, LLC 2 insp. Tampa, FL Carmen Creative Cabinet, L.L.C. 2 insp. Belton, TX Meglio Interiors, LLC 2 insp. Chamblee, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Richard & Sons, LLC
Fond Du Lac, WI
2 inspections $0
Supreme Meats INC
Saint Francis, WI
2 inspections $0
Meta Manufacturing Corporation
Blue Ash, OH
2 inspections $0
Truss Craft of Nebraska
Grand Island, NE
2 inspections $0
F & F Foods, INC.
Chicago, IL
2 inspections $0

Compare Craft and Technical Solutions, LLC vs Richard & Sons, LLC side-by-side →

What to do with this record

Use Craft and Technical Solutions, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Craft and Technical Solutions, LLC against Richard & Sons, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Craft and Technical Solutions, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Craft and Technical Solutions, LLC safe to work at? ▼
Based on OSHA records, Craft and Technical Solutions, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Craft and Technical Solutions, LLC have? ▼
Craft and Technical Solutions, LLC has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Craft and Technical Solutions, LLC had? ▼
Craft and Technical Solutions, LLC has had 2 OSHA inspections, with the first recorded on 2023-04-25 and the most recent on 2024-01-29. This averages 1.0 violations per inspection.
What is the total penalty amount for Craft and Technical Solutions, LLC? ▼
Craft and Technical Solutions, LLC has been assessed $0 in current OSHA penalties, reduced from an initial assessment of $24,062 (a 100.0% reduction).
Does Craft and Technical Solutions, LLC have any serious or willful violations? ▼
Yes. Craft and Technical Solutions, LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Craft and Technical Solutions, LLC operate in? ▼
Craft and Technical Solutions, LLC operates in the Manufacturing sector (NAICS code 336611). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Craft and Technical Solutions, LLC's safety record compare to industry average? ▼
Craft and Technical Solutions, LLC's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Supreme Meats INC in Saint Francis, WI is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.