PlainWorker
Employers › NJ

Manufacturing · Lodi, NJ

Winco/DWL International Trading LLC

According to OSHA enforcement records (2010–2026), Winco/DWL International Trading LLC ranks #8,633 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Top 10% by penalty88% serious
$34,665
OSHA penalties
8
Violations cited
2
OSHA inspections
#8,633
of 99,447 penalized employers

Winco/DWL International Trading LLC in Lodi, NJ has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $34,665. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Winco/DWL International Trading LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #8,633 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Spectro Coating CORP. in Leominster, MA is another manufacturing employer with 2 OSHA inspections on record and $34,676 in current penalties.

4.0
violations per inspection
87.5%
of violations were serious
#8,633
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Winco/DWL International Trading LLC runs well above peers (2.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$34,665 Bottom 9% least affordable more affordable than 9% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Winco/DWL International Trading LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0011223344OSHA inspectionsViolations citedDIPEN M SHAH, OSHA inspections: 2 · Violations cited: 29ALL QUALITY MACHININ…, OSHA inspections: 2 · Violations cited: 42TENNECO AUTOMOTIVE O…, OSHA inspections: 2 · Violations cited: 34TRELLEBORG WHEEL SYS…, OSHA inspections: 2 · Violations cited: 8GLIDEWELL LABORATORIES, OSHA inspections: 2 · Violations cited: 2HUNT REFINING COMPANY, OSHA inspections: 2 · Violations cited: 5SS INDUSTRIES HOLDIN…, OSHA inspections: 2 · Violations cited: 14PRL ALUMINUM INC., OSHA inspections: 2 · Violations cited: 7SUSQUEHANNA GLASS CO…, OSHA inspections: 2 · Violations cited: 15GEORGETOWN WOOD AND …, OSHA inspections: 2 · Violations cited: 12ADVANCED CONCRETE SY…, OSHA inspections: 2 · Violations cited: 5GKN AEROSPACE NORTH …, OSHA inspections: 2 · Violations cited: 10BIG RIVER CAST STONE, OSHA inspections: 2 · Violations cited: 20WALMAN OPTICAL COMPANY, OSHA inspections: 2 · Violations cited: 9BROTHERS INTERNATION…, OSHA inspections: 2 · Violations cited: 10INTERSTATE PAPER LLC, OSHA inspections: 2 · Violations cited: 14TERMAX CORPORATION, OSHA inspections: 2 · Violations cited: 3QUALTOOL, INC., OSHA inspections: 2 · Violations cited: 16BCS MANUFACTURING LLC, OSHA inspections: 2 · Violations cited: 40VALERO MCKEE REFINERY, OSHA inspections: 2 · Violations cited: 14Winco/DWL Internatio…, OSHA inspections: 2 · Violations cited: 8
Winco/DWL International Trading LLC has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Winco/DWL International Trading LLC in the Manufacturing enforcement ledger

In Manufacturing, Winco/DWL International Trading LLC sits at penalty rank #4,338 of 35,243 penalized establishments ($34,665 assessed).

How Winco/DWL International Trading LLC Compares

Winco/DWL International Trading LLC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-06-27

Last Inspection

2020-02-03

Inspection Span

1 yr

Violations / Inspection

4.0

Avg Penalty / Inspection

$17,333

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 4.0 violations per visit. That's $17,333 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

87.5% of total

0

Willful

0.0% of total

1

Repeat

12.5% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$70,221

Current Penalty Amount

$34,665

Penalty Reduction

50.6%

What this shows Penalties were reduced by $35,556 from the initial assessment of $70,221. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Winco/DWL International Trading LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Winco/DWL International Trading LLC Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $34,665 $15,763
Avg Penalty per Inspection $17,333 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Winco/DWL International Trading LLC, both outside NJ so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($34,665 here).

Methods Machine Tools, INC. $34,655 MA National Beef Packing Company, LLC $34,676 PA Spectro Coating CORP. $34,676 MA Metalworks INC. $34,680 NE

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Dipen M Shah 2 insp. Baldwyn, MS All Quality Machining & Finishing, LLC 2 insp. Christiana, PA Tenneco Automotive Operating Company INC. 2 insp. Marshall, MI Trelleborg Wheel Systems Americas, INC. 2 insp. Charles City, IA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Frederick Goldman INC.
Secaucus, NJ
2 inspections $34,660
Methods Machine Tools, INC.
Sudbury, MA
2 inspections $34,655
National Beef Packing Company, LLC
Selinsgrove, PA
2 inspections $34,676
Spectro Coating CORP.
Leominster, MA
2 inspections $34,676
Metalworks INC.
Lincoln, NE
2 inspections $34,680

Compare Winco/DWL International Trading LLC vs Frederick Goldman INC. side-by-side →

What to do with this record

Use Winco/DWL International Trading LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Winco/DWL International Trading LLC against Frederick Goldman INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Winco/DWL International Trading LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Winco/DWL International Trading LLC safe to work at? ▼
Based on OSHA records, Winco/DWL International Trading LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Winco/DWL International Trading LLC have? ▼
Winco/DWL International Trading LLC has 8 OSHA violations on record, including 7 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $34,665.
How many OSHA inspections has Winco/DWL International Trading LLC had? ▼
Winco/DWL International Trading LLC has had 2 OSHA inspections, with the first recorded on 2019-06-27 and the most recent on 2020-02-03. This averages 4.0 violations per inspection.
What is the total penalty amount for Winco/DWL International Trading LLC? ▼
Winco/DWL International Trading LLC has been assessed $34,665 in current OSHA penalties, reduced from an initial assessment of $70,221 (a 50.6% reduction).
Does Winco/DWL International Trading LLC have any serious or willful violations? ▼
Yes. Winco/DWL International Trading LLC has 7 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Winco/DWL International Trading LLC operate in? ▼
Winco/DWL International Trading LLC operates in the Manufacturing sector (NAICS code 339999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Winco/DWL International Trading LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Winco/DWL International Trading LLC ranks #8,633 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Winco/DWL International Trading LLC's safety record compare to industry average? ▼
Winco/DWL International Trading LLC's total OSHA penalty of $34,665 is above the Manufacturing industry average of $15,763 per employer (2.2x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Spectro Coating CORP. in Leominster, MA is a similar manufacturing employer with $34,676 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.