PlainWorker
Employers › PA

Manufacturing · Christiana, PA

All Quality Machining & Finishing, LLC

According to OSHA enforcement records (2010–2026), All Quality Machining & Finishing, LLC ranks #2,096 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 42 violations across 2 inspections.

Top 5% by penalty88% serious
$90,000
OSHA penalties
42
Violations cited
2
OSHA inspections
#2,096
of 99,447 penalized employers

All Quality Machining & Finishing, LLC in Christiana, PA has been the subject of 2 OSHA workplace inspections and 42 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $90,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected All Quality Machining & Finishing, LLC 2 times over 1 year - more than twice a year on average. These inspections turned up 42 violations, averaging 21.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #2,096 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 37 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Schumacher Company, INC. in Houston, TX is another manufacturing employer with 4 OSHA inspections on record and $89,870 in current penalties.

21.0
violations per inspection
88.1%
of violations were serious
#2,096
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 42 violations across 2 OSHA inspections (21.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows All Quality Machining & Finishing, LLC runs far above peers (5.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$90,000 Bottom 2% least affordable more affordable than 2% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($90,000) is well above this band, the chart's rightmost open-ended bucket. This employer: $90,000 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is All Quality Machining & Finishing, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0011223344OSHA inspectionsViolations citedREGAL INDUSTRIAL COR…, OSHA inspections: 2 · Violations cited: 23SOMACIS INC., OSHA inspections: 2 · Violations cited: 12LAB 9 MODULAR LLC, OSHA inspections: 2 · Violations cited: 12TWITCHELL CORPORATION, OSHA inspections: 2 · Violations cited: 22CHEP RECYCLED PALLET…, OSHA inspections: 2 · Violations cited: 6GRAHAM LUMBER COMPAN…, OSHA inspections: 2 · Violations cited: 2ACH FOAM TECHNOLOGIE…, OSHA inspections: 2 · Violations cited: 13TIGHITCO, INC., OSHA inspections: 2 · Violations cited: 16AMERICAN MADE TIRES, OSHA inspections: 2 · Violations cited: 37U.S. PAPER MILLS CORP., OSHA inspections: 2 · Violations cited: 8WINCO/DWL INTERNATIO…, OSHA inspections: 2 · Violations cited: 8SYFRETT FEED CO., INC., OSHA inspections: 2 · Violations cited: 21INTEGRATED LAMINATE …, OSHA inspections: 2 · Violations cited: 29TBRSP, LLC, OSHA inspections: 2 · Violations cited: 23SIGNATURE CABINETRY, OSHA inspections: 2 · Violations cited: 15MILLWORK EXPRESSIONS…, OSHA inspections: 2 · Violations cited: 28MB DYNAMICS INC., OSHA inspections: 2 · Violations cited: 33SOUTHERN FOREST PROD…, OSHA inspections: 2 · Violations cited: 12KRAFT HEINZ FOODS CO…, OSHA inspections: 2 · Violations cited: 6NASHVILLE FABRICATIO…, OSHA inspections: 2 · Violations cited: 29All Quality Machinin…, OSHA inspections: 2 · Violations cited: 42
All Quality Machining & Finishing, LLC has 2 OSHA inspections on record and 42 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

All Quality Machining & Finishing, LLC in the Manufacturing enforcement ledger

Manufacturing sector: All Quality Machining & Finishing, LLC is the #1,096 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($90,000).

How All Quality Machining & Finishing, LLC Compares

All Quality Machining & Finishing, LLC's 21.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs far above peers (5.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-04-11

Last Inspection

2018-04-11

Inspection Span

1 yr

Violations / Inspection

21.0

Avg Penalty / Inspection

$45,000

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 21.0 violations per visit. That's $45,000 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

37

Serious

88.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

11.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$172,749

Current Penalty Amount

$90,000

Penalty Reduction

47.9%

What this shows Penalties were reduced by $82,749 from the initial assessment of $172,749. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How All Quality Machining & Finishing, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric All Quality Machining & Finishing, LLC Industry Avg
Inspections 2 2.6
Violations 42 8.0
Total Penalty $90,000 $15,763
Avg Penalty per Inspection $45,000 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for All Quality Machining & Finishing, LLC, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($90,000 here).

Graphic Packaging International, INC. $90,000 LA Primex Plastics CORP. $90,000 GA Schumacher Company, INC. $89,870 TX Osi Group, LLC $89,847 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Regal Industrial Corporation 2 insp. Millville, NJ Somacis INC. 2 insp. Poway, CA Lab 9 Modular LLC 2 insp. Littleton, MA Twitchell Corporation 2 insp. Dothan, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Graphic Packaging International, INC.
West Monroe, LA
9 inspections $90,000
Primex Plastics CORP.
Oakwood, GA
4 inspections $90,000
Red River Brewing Company & Distillery
Red River, NM
0 inspections $0
Schumacher Company, INC.
Houston, TX
4 inspections $89,870
Osi Group, LLC
Fort Atkinson, WI
5 inspections $89,847

Compare All Quality Machining & Finishing, LLC vs Graphic Packaging International, INC. side-by-side →

What to do with this record

Use All Quality Machining & Finishing, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare All Quality Machining & Finishing, LLC against Graphic Packaging International, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether All Quality Machining & Finishing, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is All Quality Machining & Finishing, LLC safe to work at? ▼
Based on OSHA records, All Quality Machining & Finishing, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 42 violations across 2 inspections, including 37 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does All Quality Machining & Finishing, LLC have? ▼
All Quality Machining & Finishing, LLC has 42 OSHA violations on record, including 37 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $90,000.
How many OSHA inspections has All Quality Machining & Finishing, LLC had? ▼
All Quality Machining & Finishing, LLC has had 2 OSHA inspections, with the first recorded on 2018-04-11 and the most recent on 2018-04-11. This averages 21.0 violations per inspection.
What is the total penalty amount for All Quality Machining & Finishing, LLC? ▼
All Quality Machining & Finishing, LLC has been assessed $90,000 in current OSHA penalties, reduced from an initial assessment of $172,749 (a 47.9% reduction).
Does All Quality Machining & Finishing, LLC have any serious or willful violations? ▼
Yes. All Quality Machining & Finishing, LLC has 37 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does All Quality Machining & Finishing, LLC operate in? ▼
All Quality Machining & Finishing, LLC operates in the Manufacturing sector (NAICS code 333999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does All Quality Machining & Finishing, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, All Quality Machining & Finishing, LLC ranks #2,096 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does All Quality Machining & Finishing, LLC's safety record compare to industry average? ▼
All Quality Machining & Finishing, LLC's total OSHA penalty of $90,000 is above the Manufacturing industry average of $15,763 per employer (5.7x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Schumacher Company, INC. in Houston, TX is a similar manufacturing employer with $89,870 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.