Manufacturing · Bellville, TX

Western International Gas and Cylinders, INC.

OSHA records show a mixed safety record: 6 violations across 2 inspections — above the Manufacturing industry average for penalties.

Compiled byPlainworker Editorial, Workplace Safety Editorial Team

2
OSHA inspections: 6
Violations cited: $19,127
OSHA penalties

Western International Gas and Cylinders, INC. in Bellville, TX has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,127. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

Western International Gas and Cylinders, INC. has been inspected 2 times by OSHA over 1 year. These inspections resulted in 6 violations, averaging 3.0 violations per inspection. Of these, 1 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, Western International Gas and Cylinders, INC. has been inspected fewer frequently.

3.0
violations per inspection: 16.7%
of violations were serious: 1.2×
Manufacturing industry-avg penalty

Western International …

$19,127
Manufacturing avg

$16,300

What this shows Western International Gas and Cylinders, INC. carries 1.2× the penalties of a typical Manufacturing employer — a clear outlier in its sector.

What the Data Says About Western International Gas and Cylinders, INC.

The federal enforcement record for Western International Gas and Cylinders, INC. in Bellville, TX includes 2 OSHA inspections and 6 violations, translating to 3.00 violations per inspection. Of those violations, 1 (16.7%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $43,238 in initial penalties against this employer, later adjusted to a current total of $19,127 — a 55.8% reduction. Average penalty per inspection works out to $9,564. Against the Manufacturing industry average of $16,300 per employer, this record runs above peers.

Inspection activity spans from 2018-07-17 to 2018-07-17, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections

First Inspection

2018-07-17

Last Inspection

2018-07-17

Inspection Span

1 year

Violations per Inspection

3.0

Avg Penalty per Inspection

$9,564

Industry Avg per Inspection

$6,447

Violation Breakdown

Serious

16.7% of total

Willful

0.0% of total

Repeat

0.0% of total

Other-Than-Serious

83.3% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed

$43,238

Current Penalty Amount

$19,127

Penalty Reduction

55.8%

Penalties were reduced by $24,111 from the initial assessment of $43,238. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Western International Gas and Cylinders, INC. compares to the Manufacturing sector, which has 14,000 employers tracked by PlainWorker.

Metric	Western International Gas and Cylinders, INC.	Industry Avg
Inspections	2	2.5
Violations	6	8.0
Total Penalty	$19,127	$16,300
Avg Penalty per Inspection	$9,564	$6,447

View all 14,000 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.

TX enforcement →

Top violators and statewide OSHA & WHD totals for TX.

Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process

How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes

Your Rights Under OSHA

Know your workplace safety rights and how to exercise them

Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages

Most Dangerous Industries

Which industries face the highest rates of violations and penalties

Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

MDLG, INC.

Phenix City, AL

9 inspections $2.71M

The Goodyear Tire & Rubber Company

Danville, VA

31 inspections $2.62M

10 inspections $1.54M

Florence Hardwoods, LLC

Florence, WI

5 inspections $1.42M

Compare Western International Gas and Cylinders, INC. vs MDLG, INC. side-by-side →

Frequently Asked Questions

Is Western International Gas and Cylinders, INC. safe to work at? ▼

Based on OSHA records, Western International Gas and Cylinders, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Western International Gas and Cylinders, INC. have? ▼

Western International Gas and Cylinders, INC. has 6 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $19,127.

How many OSHA inspections has Western International Gas and Cylinders, INC. had? ▼

Western International Gas and Cylinders, INC. has had 2 OSHA inspections, with the first recorded on 2018-07-17 and the most recent on 2018-07-17. This averages 3.0 violations per inspection.

What is the total penalty amount for Western International Gas and Cylinders, INC.? ▼

Western International Gas and Cylinders, INC. has been assessed $19,127 in current OSHA penalties, reduced from an initial assessment of $43,238 (a 55.8% reduction).

Does Western International Gas and Cylinders, INC. have any serious or willful violations? ▼

Yes. Western International Gas and Cylinders, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Western International Gas and Cylinders, INC. operate in? ▼

Western International Gas and Cylinders, INC. operates in the Manufacturing sector (NAICS code 325120). This industry has 14,000 employers tracked by PlainWorker, with 35,397 total OSHA inspections and $228.20M in cumulative penalties.

What are my rights if I work at Western International Gas and Cylinders, INC.? ▼

Under the Occupational Safety and Health Act, employees at Western International Gas and Cylinders, INC. have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.

How do I file an OSHA complaint against Western International Gas and Cylinders, INC.? ▼

You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.

How does Western International Gas and Cylinders, INC.'s safety record compare to industry average? ▼

Western International Gas and Cylinders, INC.'s total OSHA penalty of $19,127 is above the Manufacturing industry average of $16,300 per employer (1.2x the average). The employer has 2 inspections compared to the industry average of 2.5 per employer.

Explore PlainWorker

Manufacturing Industry

All 14,000 employers in this sector

Employers in TX

All inspected employers in this state

Safety Rankings

Most penalized, repeat violators & more

What to check next

Western International Gas and Cylinders, INC.'s record is one establishment in a larger pattern — compare it before you draw conclusions.

See how Western International Gas and Cylinders, INC. compares to the 14,000 other employers in Manufacturing. Manufacturing record
Put this employer head-to-head with another on inspections, penalties, and back wages. Compare employers
Review the full OSHA & wage-enforcement picture for TX. TX state record

These figures are the federal enforcement record on file and reflect past inspections — not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.