PlainWorker
Employers › MI

Manufacturing · Farmington Hills, MI

Welding Technology Corporation

According to OSHA enforcement records (2010–2026), Welding Technology Corporation ranks #17,238 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 42 violations across 3 inspections.

Top 25% by penalty38% serious
$20,300
OSHA penalties
42
Violations cited
3
OSHA inspections
#17,238
of 99,447 penalized employers

Welding Technology Corporation in Farmington Hills, MI has been the subject of 3 OSHA workplace inspections and 42 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $20,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Welding Technology Corporation 3 times across a longer 7-year span, an infrequent cadence. These inspections turned up 42 violations, averaging 14.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #17,238 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Delfingen U.S. New York, INC. in Niagara Falls, NY is another manufacturing employer with 2 OSHA inspections on record and $20,300 in current penalties.

14.0
violations per inspection
38.1%
of violations were serious
#17,238
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 42 violations across 3 OSHA inspections (14.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Welding Technology Corporation compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Welding Technology Corporation runs moderately above peers (1.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$20,300 Bottom 17% least affordable more affordable than 17% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Welding Technology Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0011.022.133.144.1OSHA inspectionsViolations citedTHOMPSON HARDWOODS, …, OSHA inspections: 3 · Violations cited: 16ELITE WORKFORCE MANA…, OSHA inspections: 3 · Violations cited: 0CIMINO'S CABINET DOO…, OSHA inspections: 3 · Violations cited: 30ALLIED PLASTICS, INC., OSHA inspections: 3 · Violations cited: 10SEAFORD ICE, INC., OSHA inspections: 3 · Violations cited: 17CARAVAN FOODS II, INC., OSHA inspections: 3 · Violations cited: 6CRISPY MAID, LLC, OSHA inspections: 3 · Violations cited: 11QUAKER CITY CASTINGS…, OSHA inspections: 3 · Violations cited: 22YESAC CORP., OSHA inspections: 3 · Violations cited: 24ALLWOOD CABINETS AND…, OSHA inspections: 3 · Violations cited: 25AMRON STAIR WORKS INC., OSHA inspections: 3 · Violations cited: 16TEK RECYCLING, INC., OSHA inspections: 3 · Violations cited: 23HURRICANE CARGO, INC., OSHA inspections: 3 · Violations cited: 19GRAHAM LUMBER COMPANY, OSHA inspections: 3 · Violations cited: 16GEORGIA-PACIFIC CORR…, OSHA inspections: 3 · Violations cited: 9FCA, LLC, OSHA inspections: 3 · Violations cited: 7CONCAST BIRMINGHAM, …, OSHA inspections: 3 · Violations cited: 10FAB-TEC INDUSTRIES, OSHA inspections: 3 · Violations cited: 23BEDFORD REINFORCED P…, OSHA inspections: 3 · Violations cited: 2COSTANZO'S BAKERY, I…, OSHA inspections: 3 · Violations cited: 7Welding Technology C…, OSHA inspections: 3 · Violations cited: 42
Welding Technology Corporation has 3 OSHA inspections on record and 42 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Welding Technology Corporation in the Manufacturing enforcement ledger

In Manufacturing, Welding Technology Corporation sits at penalty rank #8,341 of 35,243 penalized establishments ($20,300 assessed).

How Welding Technology Corporation Compares

Welding Technology Corporation's 14.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2016-03-18

Last Inspection

2023-06-13

Inspection Span

7 yrs

Violations / Inspection

14.0

Avg Penalty / Inspection

$6,767

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 7 years, averaging 14.0 violations per visit. That's $6,767 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

16

Serious

38.1% of total

0

Willful

0.0% of total

3

Repeat

7.1% of total

23

Other-Than-Serious

54.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$40,600

Current Penalty Amount

$20,300

Penalty Reduction

50.0%

What this shows Penalties were reduced by $20,300 from the initial assessment of $40,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Welding Technology Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Welding Technology Corporation Industry Avg
Inspections 3 2.6
Violations 42 8.0
Total Penalty $20,300 $15,763
Avg Penalty per Inspection $6,767 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Welding Technology Corporation, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($20,300 here).

Lindt & Sprungli (USA) INC. $20,300 NH Delfingen U.S. New York, INC. $20,300 NY Nisbet, INC. $20,300 OH Institutional Casework, Incorporated $20,300 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Thompson Hardwoods, INC. 3 insp. Hazlehurst, GA Elite Workforce Management 3 insp. Little Rock, AR Cimino's Cabinet Doors, INC. 3 insp. Hollister, CA Allied Plastics, INC. 3 insp. Twin Lakes, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Lindt & Sprungli (USA) INC.
Stratham, NH
6 inspections $20,300
Delfingen U.S. New York, INC.
Niagara Falls, NY
2 inspections $20,300
Nisbet, INC.
Cincinnati, OH
3 inspections $20,300
Institutional Casework, Incorporated
Union City, TN
3 inspections $20,300
Coastal Casting Service INC.
Houston, TX
3 inspections $20,300

Compare Welding Technology Corporation vs Lindt & Sprungli (USA) INC. side-by-side →

What to do with this record

Use Welding Technology Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Welding Technology Corporation against Lindt & Sprungli (USA) INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Welding Technology Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Welding Technology Corporation safe to work at? ▼
Based on OSHA records, Welding Technology Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 42 violations across 3 inspections, including 16 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Welding Technology Corporation have? ▼
Welding Technology Corporation has 42 OSHA violations on record, including 16 serious, 0 willful, and 3 repeat violations. The total current penalty amount is $20,300.
How many OSHA inspections has Welding Technology Corporation had? ▼
Welding Technology Corporation has had 3 OSHA inspections, with the first recorded on 2016-03-18 and the most recent on 2023-06-13. This averages 14.0 violations per inspection.
What is the total penalty amount for Welding Technology Corporation? ▼
Welding Technology Corporation has been assessed $20,300 in current OSHA penalties, reduced from an initial assessment of $40,600 (a 50.0% reduction).
Does Welding Technology Corporation have any serious or willful violations? ▼
Yes. Welding Technology Corporation has 16 serious violations, and 3 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Welding Technology Corporation operate in? ▼
Welding Technology Corporation operates in the Manufacturing sector (NAICS code 333992). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Welding Technology Corporation rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Welding Technology Corporation ranks #17,238 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Welding Technology Corporation's safety record compare to industry average? ▼
Welding Technology Corporation's total OSHA penalty of $20,300 is above the Manufacturing industry average of $15,763 per employer (1.3x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Delfingen U.S. New York, INC. in Niagara Falls, NY is a similar manufacturing employer with $20,300 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.