PlainWorker
Employers › AL

Manufacturing · Fairfield, AL

US Steel Seamless Products, LLC

According to OSHA enforcement records (2010–2026), US Steel Seamless Products, LLC ranks #20,984 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 3 inspections.

Top 25% by penalty0% serious
$17,073
OSHA penalties
2
Violations cited
3
OSHA inspections
#20,984
of 99,447 penalized employers

US Steel Seamless Products, LLC in Fairfield, AL has been the subject of 3 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,073. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected US Steel Seamless Products, LLC 3 times over 4 years, roughly once every couple of years. These inspections resulted in 2 violations, averaging 0.7 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #20,984 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Koch Tenn INC in Whitesburg, TN is another manufacturing employer with 3 OSHA inspections on record and $17,076 in current penalties.

0.7
violations per inspection
0.0%
of violations were serious
#20,984
of 99,447 penalized employers

Compliance score

B 80/100
  • B OSHA safety compliance: 2 violations across 3 OSHA inspections (0.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows US Steel Seamless Products, LLC sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,073 Bottom 21% least affordable more affordable than 21% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is US Steel Seamless Products, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.39.418.527.636.6OSHA inspectionsViolations citedNEENAH, INC., OSHA inspections: 3 · Violations cited: 10G&S LUMBER CO., INC., OSHA inspections: 3 · Violations cited: 20GRIP-TITE MANUFACTUR…, OSHA inspections: 3 · Violations cited: 35NANOGATE JAY SYSTEMS…, OSHA inspections: 3 · Violations cited: 14TWIN CITY FAN COMPAN…, OSHA inspections: 3 · Violations cited: 6CHICAGO AEROSOL, LLC, OSHA inspections: 3 · Violations cited: 14PEPCO MANUFACTURING …, OSHA inspections: 3 · Violations cited: 13RICELAND FOODS, INC., OSHA inspections: 3 · Violations cited: 5JELD-WEN INC., OSHA inspections: 3 · Violations cited: 11PERMOBIL INC., OSHA inspections: 3 · Violations cited: 11TAMPA STEEL ERECTING…, OSHA inspections: 3 · Violations cited: 23FEDERAL MOGUL TP LIN…, OSHA inspections: 3 · Violations cited: 8HOWMET AEROSPACE INC., OSHA inspections: 3 · Violations cited: 2MORGAN ENGINEERING S…, OSHA inspections: 3 · Violations cited: 9MODERN DISPERSIONS, …, OSHA inspections: 3 · Violations cited: 15ENHANCED POWDER COAT…, OSHA inspections: 3 · Violations cited: 13METCO INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 6PORTAGE PLASTICS COR…, OSHA inspections: 3 · Violations cited: 5LADDAWN, INC., OSHA inspections: 3 · Violations cited: 11TRIAX INDUSTRIES LLC, OSHA inspections: 3 · Violations cited: 6US Steel Seamless Pr…, OSHA inspections: 3 · Violations cited: 2
US Steel Seamless Products, LLC has 3 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

US Steel Seamless Products, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, US Steel Seamless Products, LLC ranks #10,008 at $17,073 current penalty.

How US Steel Seamless Products, LLC Compares

US Steel Seamless Products, LLC's 0.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2021-06-22

Last Inspection

2025-06-25

Inspection Span

4 yrs

Violations / Inspection

0.7

Avg Penalty / Inspection

$5,691

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 4 years, averaging 0.7 violations per visit. That's $5,691 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$25,444

Current Penalty Amount

$17,073

Penalty Reduction

32.9%

What this shows Penalties were reduced by $8,371 from the initial assessment of $25,444. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How US Steel Seamless Products, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric US Steel Seamless Products, LLC Industry Avg
Inspections 3 2.6
Violations 2 8.0
Total Penalty $17,073 $15,763
Avg Penalty per Inspection $5,691 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for US Steel Seamless Products, LLC, both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,073 here).

Concrete Precast Products, INC. $17,073 FL Phillips Safety Products, INC. $17,072 NJ Bongards' South LLC $17,075 TN Koch Tenn INC $17,076 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Neenah, INC. 3 insp. Stevens Point, WI G&S Lumber CO., INC. 3 insp. Nacogdoches, TX Grip-Tite Manufacturing 3 insp. Winterset, IA Nanogate Jay Systems, LLC 3 insp. Mansfield, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Concrete Precast Products, INC.
Gainesville, FL
5 inspections $17,073
Phillips Safety Products, INC.
Middlesex, NJ
3 inspections $17,072
Bongards' South LLC
Humboldt, TN
4 inspections $17,075
Koch Tenn INC
Whitesburg, TN
3 inspections $17,076
Southworth Products Corporation
Manila, AR
0 inspections $0

Compare US Steel Seamless Products, LLC vs Concrete Precast Products, INC. side-by-side →

What to do with this record

Use US Steel Seamless Products, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare US Steel Seamless Products, LLC against Concrete Precast Products, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether US Steel Seamless Products, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is US Steel Seamless Products, LLC safe to work at? ▼
Based on OSHA records, US Steel Seamless Products, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 3 inspections. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does US Steel Seamless Products, LLC have? ▼
US Steel Seamless Products, LLC has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $17,073.
How many OSHA inspections has US Steel Seamless Products, LLC had? ▼
US Steel Seamless Products, LLC has had 3 OSHA inspections, with the first recorded on 2021-06-22 and the most recent on 2025-06-25. This averages 0.7 violations per inspection.
What is the total penalty amount for US Steel Seamless Products, LLC? ▼
US Steel Seamless Products, LLC has been assessed $17,073 in current OSHA penalties, reduced from an initial assessment of $25,444 (a 32.9% reduction).
What industry does US Steel Seamless Products, LLC operate in? ▼
US Steel Seamless Products, LLC operates in the Manufacturing sector (NAICS code 331110). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does US Steel Seamless Products, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, US Steel Seamless Products, LLC ranks #20,984 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does US Steel Seamless Products, LLC's safety record compare to industry average? ▼
US Steel Seamless Products, LLC's total OSHA penalty of $17,073 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Koch Tenn INC in Whitesburg, TN is a similar manufacturing employer with $17,076 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.