Construction · Charleston, WV

Tri-State Roofing & Sheet Metal Company

According to OSHA enforcement records (2010–2026), Tri-State Roofing & Sheet Metal Company has a relatively clean safety record: 4 violations across 6 inspections. See the full breakdown below.

Upper half by penalty25% serious
$12,902
OSHA penalties
4
Violations cited
6
OSHA inspections
#28,183
of 100,495 penalized employers

Tri-State Roofing & Sheet Metal Company in Charleston, WV has been the subject of 6 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,902. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tri-State Roofing & Sheet Metal Company 6 times over 7 years, roughly once every couple of years. These inspections resulted in 4 violations, averaging 0.7 per inspection, on the lighter side. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs well above peers (3.0x the sector average) on inspection frequency. For comparison, Specialty Renovations LLC in Juneau, AK is another construction employer with 2 OSHA inspections on record and $12,902 in current penalties.

0.7
violations per inspection
25.0%
of violations were serious
72%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Tri-State Roofing & Sheet Metal Company runs moderately above peers (1.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,902 Bottom 28% least affordable more affordable than 28% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tri-State Roofing & Sheet Metal Company

The federal enforcement record for Tri-State Roofing & Sheet Metal Company in Charleston, WV includes 6 OSHA inspections and 4 violations, translating to 0.67 violations per inspection. Of those violations, 1 (25.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $14,519 in initial penalties against this employer, later adjusted to a current total of $12,902 - a 11.1% reduction. Average penalty per inspection works out to $2,150. Against the Construction industry average of $6,751 per employer, this record runs moderately above peers (1.9x the sector average).

Inspection activity spans from 2010-08-10 to 2018-01-31, a window of roughly 7 years.

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2010-08-10

Last Inspection

2018-01-31

Inspection Span

7 yrs

Violations / Inspection

0.7

Avg Penalty / Inspection

$2,150

Industry Avg / Inspection

$3,361

What this shows 6 inspections over 7 years, averaging 0.7 violations per visit. That's $2,150 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

1

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,519

Current Penalty Amount

$12,902

Penalty Reduction

11.1%

What this shows Penalties were reduced by $1,617 from the initial assessment of $14,519. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Tri-State Roofing & Sheet Metal Company compares to the Construction sector, which has 61,413 employers tracked by PlainWorker.

Metric Tri-State Roofing & Sheet Metal Company Industry Avg
Inspections 6 2.0
Violations 4 3.3
Total Penalty $12,902 $6,751
Avg Penalty per Inspection $2,150 $3,361

Nearby & Similar Employers in Construction

Compare Tri-State Roofing & Sheet Metal Company vs Specialty Renovations LLC side-by-side →

Frequently Asked Questions

Is Tri-State Roofing & Sheet Metal Company safe to work at?
Based on OSHA records, Tri-State Roofing & Sheet Metal Company's workplace safety record is relatively clean, with fewer violations than typical. The employer has 4 violations across 6 inspections, including 1 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tri-State Roofing & Sheet Metal Company have?
Tri-State Roofing & Sheet Metal Company has 4 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $12,902.
How many OSHA inspections has Tri-State Roofing & Sheet Metal Company had?
Tri-State Roofing & Sheet Metal Company has had 6 OSHA inspections, with the first recorded on 2010-08-10 and the most recent on 2018-01-31. This averages 0.7 violations per inspection.
What is the total penalty amount for Tri-State Roofing & Sheet Metal Company?
Tri-State Roofing & Sheet Metal Company has been assessed $12,902 in current OSHA penalties, reduced from an initial assessment of $14,519 (a 11.1% reduction).
Does Tri-State Roofing & Sheet Metal Company have any serious or willful violations?
Yes. Tri-State Roofing & Sheet Metal Company has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tri-State Roofing & Sheet Metal Company operate in?
Tri-State Roofing & Sheet Metal Company operates in the Construction sector (NAICS code 238220). This industry has 61,413 employers tracked by PlainWorker, with 123,350 total OSHA inspections and $414.57M in cumulative penalties.
How does Tri-State Roofing & Sheet Metal Company's safety record compare to industry average?
Tri-State Roofing & Sheet Metal Company's total OSHA penalty of $12,902 is above the Construction industry average of $6,751 per employer (1.9x the average). The employer has 6 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Specialty Renovations LLC in Juneau, AK is a similar construction employer with $12,902 in current penalties.

Explore PlainWorker

What to check next

Tri-State Roofing & Sheet Metal Company's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.