PlainWorker
Employers › RI

Manufacturing · Bristol, RI

Tri-Mack Plastics MFG CORP.

According to OSHA enforcement records (2010–2026), Tri-Mack Plastics MFG CORP. ranks #89,724 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Lower half by penalty100% serious
$737
OSHA penalties
2
Violations cited
2
OSHA inspections
#89,724
of 99,447 penalized employers

Tri-Mack Plastics MFG CORP. in Bristol, RI has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $737. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tri-Mack Plastics MFG CORP. 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #89,724 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Wanner Engineering INC in Minneapolis, MN is another manufacturing employer with 3 OSHA inspections on record and $735 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#89,724
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tri-Mack Plastics MFG CORP. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tri-Mack Plastics MFG CORP. runs well below peers (0.05x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$737 Top 10% most affordable more affordable than 90% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tri-Mack Plastics MFG CORP..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0027.354.581.8109.1OSHA inspectionsViolations citedCARTHAGE SPECIALTY P…, OSHA inspections: 2 · Violations cited: 104CUISINE SOLUTIONS INC., OSHA inspections: 2 · Violations cited: 3AXION CORPORATION, OSHA inspections: 2 · Violations cited: 13ABRASIVE TECHNOLOGY,…, OSHA inspections: 2 · Violations cited: 13WOODWARD DESIGN + BU…, OSHA inspections: 2 · Violations cited: 10SCHWANS GLOBAL SUPPL…, OSHA inspections: 2 · Violations cited: 8AMES TRUE TEMPER, OSHA inspections: 2 · Violations cited: 11LMC-HB CORP., OSHA inspections: 2 · Violations cited: 24SIERRA PACIFIC INDUS…, OSHA inspections: 2 · Violations cited: 4INDUSTRIAL TIMBER, LLC, OSHA inspections: 2 · Violations cited: 8THE TOP DIE CASTING …, OSHA inspections: 2 · Violations cited: 5GREIF, INC., OSHA inspections: 2 · Violations cited: 8SEALY, INC., OSHA inspections: 2 · Violations cited: 2TRIBE 9 FOODS LLC, OSHA inspections: 2 · Violations cited: 4PAI INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 24UNION SLAUGHTER HOUS…, OSHA inspections: 2 · Violations cited: 16TARRIER FOODS CORPOR…, OSHA inspections: 2 · Violations cited: 5PAKO INC., OSHA inspections: 2 · Violations cited: 3PINNACLE POWDER COAT…, OSHA inspections: 2 · Violations cited: 13ELGIN INDUSTRIES DBA…, OSHA inspections: 2 · Violations cited: 9Tri-Mack Plastics MF…, OSHA inspections: 2 · Violations cited: 2
Tri-Mack Plastics MFG CORP. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tri-Mack Plastics MFG CORP. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Tri-Mack Plastics MFG CORP. ranks #33,183 at $737 current penalty.

How Tri-Mack Plastics MFG CORP. Compares

Tri-Mack Plastics MFG CORP.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.05x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-09-01

Last Inspection

2016-04-25

Inspection Span

6 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$369

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 1.0 violations per visit. That's $369 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,473

Current Penalty Amount

$737

Penalty Reduction

50.0%

What this shows Penalties were reduced by $736 from the initial assessment of $1,473. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tri-Mack Plastics MFG CORP. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tri-Mack Plastics MFG CORP. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $737 $15,763
Avg Penalty per Inspection $369 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tri-Mack Plastics MFG CORP., both outside RI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($737 here).

Firstharvest, INC. $738 MT Rev Group, INC. $738 PA SCC Custom Molding LLC $736 MN Zero Zone Refrigeration LLC $735 MN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Carthage Specialty Paperboard, INC. 2 insp. Carthage, NY Cuisine Solutions INC. 2 insp. Alexandria, VA Axion Corporation 2 insp. Huntsville, AL Abrasive Technology, INC. 2 insp. Lewis Center, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Firstharvest, INC.
Belgrade, MT
2 inspections $738
Rev Group, INC.
Nesquehoning, PA
2 inspections $738
SCC Custom Molding LLC
Wheaton, MN
2 inspections $736
Zero Zone Refrigeration LLC
Anoka, MN
2 inspections $735
Wanner Engineering INC
Minneapolis, MN
3 inspections $735

Compare Tri-Mack Plastics MFG CORP. vs Firstharvest, INC. side-by-side →

What to do with this record

Use Tri-Mack Plastics MFG CORP.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tri-Mack Plastics MFG CORP. against Firstharvest, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tri-Mack Plastics MFG CORP.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tri-Mack Plastics MFG CORP. safe to work at? ▼
Based on OSHA records, Tri-Mack Plastics MFG CORP.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tri-Mack Plastics MFG CORP. have? ▼
Tri-Mack Plastics MFG CORP. has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $737.
How many OSHA inspections has Tri-Mack Plastics MFG CORP. had? ▼
Tri-Mack Plastics MFG CORP. has had 2 OSHA inspections, with the first recorded on 2010-09-01 and the most recent on 2016-04-25. This averages 1.0 violations per inspection.
What is the total penalty amount for Tri-Mack Plastics MFG CORP.? ▼
Tri-Mack Plastics MFG CORP. has been assessed $737 in current OSHA penalties, reduced from an initial assessment of $1,473 (a 50.0% reduction).
Does Tri-Mack Plastics MFG CORP. have any serious or willful violations? ▼
Yes. Tri-Mack Plastics MFG CORP. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tri-Mack Plastics MFG CORP. operate in? ▼
Tri-Mack Plastics MFG CORP. operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tri-Mack Plastics MFG CORP. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tri-Mack Plastics MFG CORP. ranks #89,724 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tri-Mack Plastics MFG CORP.'s safety record compare to industry average? ▼
Tri-Mack Plastics MFG CORP.'s total OSHA penalty of $737 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Wanner Engineering INC in Minneapolis, MN is a similar manufacturing employer with $735 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.