PlainWorker
Employers › WI

Manufacturing · Hartford, WI

Trade Tech INC

According to OSHA enforcement records (2010–2026), Trade Tech INC ranks #88,125 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 3 inspections.

Lower half by penalty0% serious
$863
OSHA penalties
1
Violations cited
3
OSHA inspections
#88,125
of 99,447 penalized employers

Trade Tech INC in Hartford, WI has been the subject of 3 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $863. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Trade Tech INC 3 times over 3 years, roughly annually. These inspections resulted in 1 violation, averaging 0.3 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #88,125 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Imperial Valley Cooling in El Centro, CA is another manufacturing employer with 2 OSHA inspections on record and $865 in current penalties.

0.3
violations per inspection
0.0%
of violations were serious
#88,125
of 99,447 penalized employers

Compliance score

B 85/100
  • B OSHA safety compliance: 1 violation across 3 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Trade Tech INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Trade Tech INC runs well below peers (0.05x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$863 Top 11% most affordable more affordable than 89% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Trade Tech INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0012.625.237.850.4OSHA inspectionsViolations citedAMD INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 41ARDENT MILLS, LLC, OSHA inspections: 3 · Violations cited: 8BURT LUMBER COMPANY, OSHA inspections: 3 · Violations cited: 36TEXAS STEEL CONVERSION, OSHA inspections: 3 · Violations cited: 12BLACK RIVER COMMODIT…, OSHA inspections: 3 · Violations cited: 11OLDCASTLE PRECAST INC, OSHA inspections: 3 · Violations cited: 6COMET SIGNS LLC., OSHA inspections: 3 · Violations cited: 7STEEL, LLC, OSHA inspections: 3 · Violations cited: 16PAUWAY CORPORATION, OSHA inspections: 3 · Violations cited: 13HANKOOK ATLASBX AMER…, OSHA inspections: 3 · Violations cited: 48TEXAS PRIDE TRAILERS…, OSHA inspections: 3 · Violations cited: 10PROGRESSIVE STAMPING…, OSHA inspections: 3 · Violations cited: 4DENNIE'S MANUFACTURI…, OSHA inspections: 3 · Violations cited: 20ARTE SANO LLC, OSHA inspections: 3 · Violations cited: 8IDAHO TIMBER OF CART…, OSHA inspections: 3 · Violations cited: 6STAMPED PRODUCTS, INC., OSHA inspections: 3 · Violations cited: 11JAY'S FURNITURE PROD…, OSHA inspections: 3 · Violations cited: 13MONTEBELLO PACKAGING…, OSHA inspections: 3 · Violations cited: 12APEKS, LLC, OSHA inspections: 3 · Violations cited: 8ANALOGIC CORPORATION, OSHA inspections: 3 · Violations cited: 6Trade Tech INC, OSHA inspections: 3 · Violations cited: 1
Trade Tech INC has 3 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Trade Tech INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Trade Tech INC ranks #32,795 at $863 current penalty.

How Trade Tech INC Compares

Trade Tech INC's 0.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.05x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2022-06-27

Last Inspection

2025-05-06

Inspection Span

3 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$288

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 3 years, averaging 0.3 violations per visit. That's $288 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,233

Current Penalty Amount

$863

Penalty Reduction

30.0%

What this shows Penalties were reduced by $370 from the initial assessment of $1,233. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Trade Tech INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Trade Tech INC Industry Avg
Inspections 3 2.6
Violations 1 8.0
Total Penalty $863 $15,763
Avg Penalty per Inspection $288 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Trade Tech INC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($863 here).

Perfect Fit MC Donald INC $862 WA Imperial Valley Cooling $865 CA Fort Chiswell Machine Tool Products, INC. $865 VA Accurate Metal Fabricators LLC $860 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Amd Industries, INC. 3 insp. Cicero, IL Ardent Mills, LLC 3 insp. Easton, PA Burt Lumber Company 3 insp. Washington, GA Texas Steel Conversion 3 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Perfect Fit MC Donald INC
Tukwila, WA
2 inspections $862
Imperial Valley Cooling
El Centro, CA
2 inspections $865
Fort Chiswell Machine Tool Products, INC.
Max Meadows, VA
3 inspections $865
Accurate Metal Fabricators LLC
Anaheim, CA
3 inspections $860
Florida Metal Building Services, LLC
Ocala, FL
2 inspections $866

Compare Trade Tech INC vs Perfect Fit MC Donald INC side-by-side →

What to do with this record

Use Trade Tech INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Trade Tech INC against Perfect Fit MC Donald INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Trade Tech INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Trade Tech INC safe to work at? ▼
Based on OSHA records, Trade Tech INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Trade Tech INC have? ▼
Trade Tech INC has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $863.
How many OSHA inspections has Trade Tech INC had? ▼
Trade Tech INC has had 3 OSHA inspections, with the first recorded on 2022-06-27 and the most recent on 2025-05-06. This averages 0.3 violations per inspection.
What is the total penalty amount for Trade Tech INC? ▼
Trade Tech INC has been assessed $863 in current OSHA penalties, reduced from an initial assessment of $1,233 (a 30.0% reduction).
What industry does Trade Tech INC operate in? ▼
Trade Tech INC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Trade Tech INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Trade Tech INC ranks #88,125 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Trade Tech INC's safety record compare to industry average? ▼
Trade Tech INC's total OSHA penalty of $863 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Imperial Valley Cooling in El Centro, CA is a similar manufacturing employer with $865 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.