PlainWorker
Employers › LA

Manufacturing · West Monroe, LA

Tippen's Specialty Millwork, LLC

According to OSHA enforcement records (2010–2026), Tippen's Specialty Millwork, LLC ranks #72,473 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 3 inspections.

Lower half by penalty67% serious
$2,500
OSHA penalties
6
Violations cited
3
OSHA inspections
#72,473
of 99,447 penalized employers

Tippen's Specialty Millwork, LLC in West Monroe, LA has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tippen's Specialty Millwork, LLC 3 times over 4 years, roughly once every couple of years. These inspections resulted in 6 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #72,473 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, United Foods International (USA), INC. in Belcamp, MD is another manufacturing employer with 3 OSHA inspections on record and $2,500 in current penalties.

2.0
violations per inspection
66.7%
of violations were serious
#72,473
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 6 violations across 3 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tippen's Specialty Millwork, LLC runs well below peers (0.16x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,500 Top 27% most affordable more affordable than 73% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tippen's Specialty Millwork, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.03.113.323.533.743.9OSHA inspectionsViolations citedCARLA'S PASTA, INC., OSHA inspections: 3 · Violations cited: 34OBERDORFER, L.L.C., OSHA inspections: 3 · Violations cited: 42AJLS ENTERPRISES INC., OSHA inspections: 3 · Violations cited: 20NORTHEAST AGRICULTUR…, OSHA inspections: 3 · Violations cited: 25MINI MELTS USA, INC., OSHA inspections: 3 · Violations cited: 31DURA STRESS, INC., OSHA inspections: 3 · Violations cited: 5SCHAEFFLER AEROSPACE…, OSHA inspections: 3 · Violations cited: 15PRIMEX FARMS, LLC, OSHA inspections: 3 · Violations cited: 8ITT GOULDS PUMPS, INC., OSHA inspections: 3 · Violations cited: 6ALPINE WOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 13PALRAM 2000, INCORPO…, OSHA inspections: 3 · Violations cited: 7EAGLE WINGS INDUSTRI…, OSHA inspections: 3 · Violations cited: 8MIDWEST RAILCAR REPA…, OSHA inspections: 3 · Violations cited: 12V&V SUPREMO FOODS, I…, OSHA inspections: 3 · Violations cited: 5THE CROSBY GROUP LLC, OSHA inspections: 3 · Violations cited: 11ALLAN INDUSTRIAL COA…, OSHA inspections: 3 · Violations cited: 22KERRY INC., OSHA inspections: 3 · Violations cited: 11PHILADELPHIA RUST-PR…, OSHA inspections: 3 · Violations cited: 26GENESIS MILLWORK, LLC, OSHA inspections: 3 · Violations cited: 9TYSON DELI, INC., OSHA inspections: 3 · Violations cited: 8Tippen's Specialty M…, OSHA inspections: 3 · Violations cited: 6
Tippen's Specialty Millwork, LLC has 3 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tippen's Specialty Millwork, LLC in the Manufacturing enforcement ledger

Manufacturing sector: Tippen's Specialty Millwork, LLC is the #28,448 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,500).

How Tippen's Specialty Millwork, LLC Compares

Tippen's Specialty Millwork, LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.16x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-08-08

Last Inspection

2015-06-12

Inspection Span

4 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$833

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 4 years, averaging 2.0 violations per visit. That's $833 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,180

Current Penalty Amount

$2,500

Penalty Reduction

72.8%

What this shows Penalties were reduced by $6,680 from the initial assessment of $9,180. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tippen's Specialty Millwork, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tippen's Specialty Millwork, LLC Industry Avg
Inspections 3 2.6
Violations 6 8.0
Total Penalty $2,500 $15,763
Avg Penalty per Inspection $833 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tippen's Specialty Millwork, LLC, both outside LA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,500 here).

Kro Pro LLC $2,500 MI CNH Industrial America LLC $2,500 WI Global Alternative Fuels $2,500 TX Ameristar Laser Cutting INC $2,500 MN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Carla's Pasta, INC. 3 insp. South Windsor, CT Oberdorfer, L.L.C. 3 insp. Syracuse, NY Ajls Enterprises INC. 3 insp. Madison, WI Northeast Agricultural Sales, INC. 3 insp. Detroit, ME

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

CNH Industrial America LLC
Sturtevant, WI
3 inspections $2,500
Garner Industries
Lincoln, NE
2 inspections $2,500
Glenridge Fabricators, INC.
Glendale, NY
2 inspections $2,500
United Foods International (USA), INC.
Belcamp, MD
3 inspections $2,500
Swan Valley Cheese of Vermont
Swanton, VT
2 inspections $2,500

Compare Tippen's Specialty Millwork, LLC vs CNH Industrial America LLC side-by-side →

What to do with this record

Use Tippen's Specialty Millwork, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tippen's Specialty Millwork, LLC against CNH Industrial America LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tippen's Specialty Millwork, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tippen's Specialty Millwork, LLC safe to work at? ▼
Based on OSHA records, Tippen's Specialty Millwork, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tippen's Specialty Millwork, LLC have? ▼
Tippen's Specialty Millwork, LLC has 6 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,500.
How many OSHA inspections has Tippen's Specialty Millwork, LLC had? ▼
Tippen's Specialty Millwork, LLC has had 3 OSHA inspections, with the first recorded on 2011-08-08 and the most recent on 2015-06-12. This averages 2.0 violations per inspection.
What is the total penalty amount for Tippen's Specialty Millwork, LLC? ▼
Tippen's Specialty Millwork, LLC has been assessed $2,500 in current OSHA penalties, reduced from an initial assessment of $9,180 (a 72.8% reduction).
Does Tippen's Specialty Millwork, LLC have any serious or willful violations? ▼
Yes. Tippen's Specialty Millwork, LLC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tippen's Specialty Millwork, LLC operate in? ▼
Tippen's Specialty Millwork, LLC operates in the Manufacturing sector (NAICS code 337212). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tippen's Specialty Millwork, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tippen's Specialty Millwork, LLC ranks #72,473 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tippen's Specialty Millwork, LLC's safety record compare to industry average? ▼
Tippen's Specialty Millwork, LLC's total OSHA penalty of $2,500 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, United Foods International (USA), INC. in Belcamp, MD is a similar manufacturing employer with $2,500 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.