PlainWorker
Employers › TX

Manufacturing · Houston, TX

Tip Top Sheet Metal, INC

According to OSHA enforcement records (2010–2026), Tip Top Sheet Metal, INC has a relatively clean safety record: 1 violations across 2 inspections. See the full breakdown below.

Lower half by penalty0% serious
$800
OSHA penalties
1
Violations cited
2
OSHA inspections
#89,944
of 100,495 penalized employers

Tip Top Sheet Metal, INC in Houston, TX has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tip Top Sheet Metal, INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Screen Gems INC in New Windsor, NY is another manufacturing employer with 2 OSHA inspections on record and $800 in current penalties.

0.5
violations per inspection
0.0%
of violations were serious
10%
of penalized employers rank lower

How Tip Top Sheet Metal, INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tip Top Sheet Metal, INC runs well below peers (0.05x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$800 Top 10% most affordable more affordable than 90% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tip Top Sheet Metal, INC

The federal enforcement record for Tip Top Sheet Metal, INC in Houston, TX includes 2 OSHA inspections and 1 violation, translating to 0.50 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat.

OSHA assessed $2,800 in initial penalties against this employer, later adjusted to a current total of $800 - a 71.4% reduction. Average penalty per inspection works out to $400. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.05x the sector average).

Inspection activity spans from 2015-02-12 to 2015-10-13, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-02-12

Last Inspection

2015-10-13

Inspection Span

1 yr

Violations / Inspection

0.5

Avg Penalty / Inspection

$400

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 0.5 violations per visit. That's $400 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,800

Current Penalty Amount

$800

Penalty Reduction

71.4%

What this shows Penalties were reduced by $2,000 from the initial assessment of $2,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tip Top Sheet Metal, INC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Tip Top Sheet Metal, INC Industry Avg
Inspections 2 2.5
Violations 1 7.8
Total Penalty $800 $15,410
Avg Penalty per Inspection $400 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Metaltech, INC.
Oklahoma City, OK
2 inspections $800
Quality Impressions Business Forms, INC.
Charlotte, NC
2 inspections $800
Century Signs, LLC
El Paso, TX
2 inspections $800
Invisible Structures, INC.
Aurora, CO
2 inspections $800
Screen Gems INC
New Windsor, NY
2 inspections $800

Compare Tip Top Sheet Metal, INC vs Metaltech, INC. side-by-side →

Frequently Asked Questions

Is Tip Top Sheet Metal, INC safe to work at? ▼
Based on OSHA records, Tip Top Sheet Metal, INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tip Top Sheet Metal, INC have? ▼
Tip Top Sheet Metal, INC has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $800.
How many OSHA inspections has Tip Top Sheet Metal, INC had? ▼
Tip Top Sheet Metal, INC has had 2 OSHA inspections, with the first recorded on 2015-02-12 and the most recent on 2015-10-13. This averages 0.5 violations per inspection.
What is the total penalty amount for Tip Top Sheet Metal, INC? ▼
Tip Top Sheet Metal, INC has been assessed $800 in current OSHA penalties, reduced from an initial assessment of $2,800 (a 71.4% reduction).
What industry does Tip Top Sheet Metal, INC operate in? ▼
Tip Top Sheet Metal, INC operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Tip Top Sheet Metal, INC's safety record compare to industry average? ▼
Tip Top Sheet Metal, INC's total OSHA penalty of $800 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Screen Gems INC in New Windsor, NY is a similar manufacturing employer with $800 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in TX

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Tip Top Sheet Metal, INC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.