PlainWorker
Employers › KY

Manufacturing · Calvert City, KY

Thermal Control and Fabrication, INC.

According to OSHA enforcement records (2010–2026), Thermal Control and Fabrication, INC. ranks #26,429 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Upper half by penalty60% serious
$13,700
OSHA penalties
15
Violations cited
2
OSHA inspections
#26,429
of 99,447 penalized employers

Thermal Control and Fabrication, INC. in Calvert City, KY has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $13,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Thermal Control and Fabrication, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #26,429 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Global Emergency Vehicles INC. in Levittown, PA is another manufacturing employer with 3 OSHA inspections on record and $13,700 in current penalties.

7.5
violations per inspection
60.0%
of violations were serious
#26,429
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Thermal Control and Fabrication, INC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$13,700 Bottom 27% least affordable more affordable than 27% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Thermal Control and Fabrication, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.69.116.523.931.4OSHA inspectionsViolations citedALL FAB PRECISION SH…, OSHA inspections: 2 · Violations cited: 3TRIDENT SEAFOODS COR…, OSHA inspections: 2 · Violations cited: 21SYMRISE INC., OSHA inspections: 2 · Violations cited: 12SCURLOCK HOLDINGS, I…, OSHA inspections: 2 · Violations cited: 7NEW ENGLAND WIRE PRO…, OSHA inspections: 2 · Violations cited: 8HOWELL METAL COMPANY, OSHA inspections: 2 · Violations cited: 6EVAPCO, INC., OSHA inspections: 2 · Violations cited: 7LITTLE ENTERPRISES, …, OSHA inspections: 2 · Violations cited: 24JCM ENGINEERING CORP, OSHA inspections: 2 · Violations cited: 4NEIL ENTERPRISES, INC., OSHA inspections: 2 · Violations cited: 14CUSTOM FAB, INC., OSHA inspections: 2 · Violations cited: 15JAMES WEIR, OSHA inspections: 2 · Violations cited: 17OLAM WEST COAST, INC., OSHA inspections: 2 · Violations cited: 6THE MERCHANT OF TENN…, OSHA inspections: 2 · Violations cited: 8BIG RIVER SHIPBUILDE…, OSHA inspections: 2 · Violations cited: 30ATI ALLVAC, OSHA inspections: 2 · Violations cited: 8ARMOR LITE TRAILERS …, OSHA inspections: 2 · Violations cited: 27VEXAPAK, LLC, OSHA inspections: 2 · Violations cited: 5DHO, LLC, OSHA inspections: 2 · Violations cited: 1621ST CENTURY SIGNS, OSHA inspections: 2 · Violations cited: 9Thermal Control and …, OSHA inspections: 2 · Violations cited: 15
Thermal Control and Fabrication, INC. has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Thermal Control and Fabrication, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Thermal Control and Fabrication, INC. is the #12,349 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($13,700).

How Thermal Control and Fabrication, INC. Compares

Thermal Control and Fabrication, INC.'s 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-01-23

Last Inspection

2018-01-30

Inspection Span

1 yr

Violations / Inspection

7.5

Avg Penalty / Inspection

$6,850

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.5 violations per visit. That's $6,850 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$25,498

Current Penalty Amount

$13,700

Penalty Reduction

46.3%

What this shows Penalties were reduced by $11,798 from the initial assessment of $25,498. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Thermal Control and Fabrication, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Thermal Control and Fabrication, INC. Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $13,700 $15,763
Avg Penalty per Inspection $6,850 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Thermal Control and Fabrication, INC., both outside KY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($13,700 here).

Ryan Polishing Corporation $13,700 MI Charms LLC $13,700 TN Whemco-Steel Castings, INC. $13,700 PA Team Industrial Services, INC. $13,700 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

All Fab Precision Sheetmetal, INC. 2 insp. Fairburn, GA Trident Seafoods Corporation 2 insp. Kodiak, AK Symrise INC. 2 insp. Branchburg, NJ Scurlock Holdings, INC. 2 insp. Jonesboro, AR

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Ryan Polishing Corporation
Oak Park, MI
5 inspections $13,700
Charms LLC
Covington, TN
4 inspections $13,700
Whemco-Steel Castings, INC.
Midland, PA
4 inspections $13,700
Team Industrial Services, INC.
Houston, TX
2 inspections $13,700
Global Emergency Vehicles INC.
Levittown, PA
3 inspections $13,700

Compare Thermal Control and Fabrication, INC. vs Ryan Polishing Corporation side-by-side →

What to do with this record

Use Thermal Control and Fabrication, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Thermal Control and Fabrication, INC. against Ryan Polishing Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Thermal Control and Fabrication, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Thermal Control and Fabrication, INC. safe to work at? ▼
Based on OSHA records, Thermal Control and Fabrication, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Thermal Control and Fabrication, INC. have? ▼
Thermal Control and Fabrication, INC. has 15 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $13,700.
How many OSHA inspections has Thermal Control and Fabrication, INC. had? ▼
Thermal Control and Fabrication, INC. has had 2 OSHA inspections, with the first recorded on 2018-01-23 and the most recent on 2018-01-30. This averages 7.5 violations per inspection.
What is the total penalty amount for Thermal Control and Fabrication, INC.? ▼
Thermal Control and Fabrication, INC. has been assessed $13,700 in current OSHA penalties, reduced from an initial assessment of $25,498 (a 46.3% reduction).
Does Thermal Control and Fabrication, INC. have any serious or willful violations? ▼
Yes. Thermal Control and Fabrication, INC. has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Thermal Control and Fabrication, INC. operate in? ▼
Thermal Control and Fabrication, INC. operates in the Manufacturing sector (NAICS code 336611). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Thermal Control and Fabrication, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Thermal Control and Fabrication, INC. ranks #26,429 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Thermal Control and Fabrication, INC.'s safety record compare to industry average? ▼
Thermal Control and Fabrication, INC.'s total OSHA penalty of $13,700 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Global Emergency Vehicles INC. in Levittown, PA is a similar manufacturing employer with $13,700 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.