PlainWorker
Employers › MS

Manufacturing · Louisville, MS

Taylor Machine Works, INC.

According to OSHA enforcement records (2010–2026), Taylor Machine Works, INC. has a concerning safety record: 21 violations across 6 inspections. See the full breakdown below.

Top 25% by penalty71% serious
$27,842
OSHA penalties
21
Violations cited
6
OSHA inspections
#11,644
of 100,495 penalized employers

Taylor Machine Works, INC. in Louisville, MS has been the subject of 6 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $27,842. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Taylor Machine Works, INC. 6 times across a longer 13-year span, an infrequent cadence. These inspections resulted in 21 violations, averaging 3.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 15 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.4x the sector average) on inspection frequency. For comparison, Richmond Baking of Georgia, INC. in Alma, GA is another manufacturing employer with 2 OSHA inspections on record and $27,846 in current penalties.

3.5
violations per inspection
71.4%
of violations were serious
88%
of penalized employers rank lower

How Taylor Machine Works, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Taylor Machine Works, INC. runs moderately above peers (1.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$27,842 Bottom 12% least affordable more affordable than 12% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Taylor Machine Works, INC.

The federal enforcement record for Taylor Machine Works, INC. in Louisville, MS includes 6 OSHA inspections and 21 violations, translating to 3.50 violations per inspection. Of those violations, 15 (71.4%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $41,673 in initial penalties against this employer, later adjusted to a current total of $27,842 - a 33.2% reduction. Average penalty per inspection works out to $4,640. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.8x the sector average).

Inspection activity spans from 2012-06-14 to 2025-11-25, a window of roughly 13 years.

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2012-06-14

Last Inspection

2025-11-25

Inspection Span

13 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$4,640

Industry Avg / Inspection

$6,092

What this shows 6 inspections over 13 years, averaging 3.5 violations per visit. That's $4,640 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

15

Serious

71.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

28.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$41,673

Current Penalty Amount

$27,842

Penalty Reduction

33.2%

What this shows Penalties were reduced by $13,831 from the initial assessment of $41,673. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Taylor Machine Works, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Taylor Machine Works, INC. Industry Avg
Inspections 6 2.5
Violations 21 7.8
Total Penalty $27,842 $15,410
Avg Penalty per Inspection $4,640 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Omtec Corporation
Marlborough, MA
3 inspections $27,843
Jim C. Hamer Company
Webster Springs, WV
2 inspections $27,841
Peerless-Premier Appliance CO.
Belleville, IL
5 inspections $27,845
Richmond Baking of Georgia, INC.
Alma, GA
2 inspections $27,846
Ace Electric Contracting, LLC.
Belleville, NJ
0 inspections $0

Compare Taylor Machine Works, INC. vs Omtec Corporation side-by-side →

Frequently Asked Questions

Is Taylor Machine Works, INC. safe to work at? ▼
Based on OSHA records, Taylor Machine Works, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 6 inspections, including 15 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Taylor Machine Works, INC. have? ▼
Taylor Machine Works, INC. has 21 OSHA violations on record, including 15 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $27,842.
How many OSHA inspections has Taylor Machine Works, INC. had? ▼
Taylor Machine Works, INC. has had 6 OSHA inspections, with the first recorded on 2012-06-14 and the most recent on 2025-11-25. This averages 3.5 violations per inspection.
What is the total penalty amount for Taylor Machine Works, INC.? ▼
Taylor Machine Works, INC. has been assessed $27,842 in current OSHA penalties, reduced from an initial assessment of $41,673 (a 33.2% reduction).
Does Taylor Machine Works, INC. have any serious or willful violations? ▼
Yes. Taylor Machine Works, INC. has 15 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Taylor Machine Works, INC. operate in? ▼
Taylor Machine Works, INC. operates in the Manufacturing sector (NAICS code 333924). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Taylor Machine Works, INC.'s safety record compare to industry average? ▼
Taylor Machine Works, INC.'s total OSHA penalty of $27,842 is above the Manufacturing industry average of $15,410 per employer (1.8x the average). The employer has 6 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Richmond Baking of Georgia, INC. in Alma, GA is a similar manufacturing employer with $27,846 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MS

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Taylor Machine Works, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.