PlainWorker
Employers › OH

Construction · Sylvania, OH

T-J Roofing & Sheet Metal LLC

According to OSHA enforcement records (2010–2026), T-J Roofing & Sheet Metal LLC ranks #58,078 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 2 violations across 2 inspections.

Lower half by penalty50% serious
$4,517
OSHA penalties
2
Violations cited
2
OSHA inspections
#58,078
of 99,447 penalized employers

T-J Roofing & Sheet Metal LLC in Sylvania, OH has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,517. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected T-J Roofing & Sheet Metal LLC 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #58,078 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Universal Construction CO. in Providence, RI is another construction employer with 2 OSHA inspections on record and $4,518 in current penalties.

1.0
violations per inspection
50.0%
of violations were serious
#58,078
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How T-J Roofing & Sheet Metal LLC compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows T-J Roofing & Sheet Metal LLC runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,517 Top 42% most affordable more affordable than 58% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is T-J Roofing & Sheet Metal LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.25.61014.418.8OSHA inspectionsViolations citedFRAME Q LLC, OSHA inspections: 2 · Violations cited: 6GEORGE & LYNCH, INC., OSHA inspections: 2 · Violations cited: 14VALLENCOURT CONSTRUC…, OSHA inspections: 2 · Violations cited: 9UKONE GENERAL CONSTR…, OSHA inspections: 2 · Violations cited: 17CENTURY COMMUNITIES,…, OSHA inspections: 2 · Violations cited: 2SWAIN CONSTRUCTION, OSHA inspections: 2 · Violations cited: 18AMBROCIO LARA, OSHA inspections: 2 · Violations cited: 6JZ GENERAL CONSTRUCT…, OSHA inspections: 2 · Violations cited: 4GANDY STEEL ERECTION, OSHA inspections: 2 · Violations cited: 8AMANO CONSTRUCTION INC, OSHA inspections: 2 · Violations cited: 7PRATA CONSTRUCTION LLC, OSHA inspections: 2 · Violations cited: 4ARCHER WESTERN CONST…, OSHA inspections: 2 · Violations cited: 3TUTOR PERINI CORP., OSHA inspections: 2 · Violations cited: 17LUCKINBILL CONSTRUCT…, OSHA inspections: 2 · Violations cited: 2BOROUGH OF ALLENHURS…, OSHA inspections: 2 · Violations cited: 11TITAN ELECTRIC OF KE…, OSHA inspections: 2 · Violations cited: 10JA HOMEWORX LLC, OSHA inspections: 2 · Violations cited: 5JOSE CASTILLO, OSHA inspections: 2 · Violations cited: 6BRADWIN CONSTRUCTION…, OSHA inspections: 2 · Violations cited: 4ROYAL ROOFING CO., I…, OSHA inspections: 2 · Violations cited: 6T-J Roofing & Sheet …, OSHA inspections: 2 · Violations cited: 2
T-J Roofing & Sheet Metal LLC has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

T-J Roofing & Sheet Metal LLC in the Construction enforcement ledger

Construction sector: T-J Roofing & Sheet Metal LLC is the #17,731 heaviest OSHA penalty carrier of 33,222 employers with nonzero fines ($4,517).

How T-J Roofing & Sheet Metal LLC Compares

T-J Roofing & Sheet Metal LLC's 1.00 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-03-30

Last Inspection

2020-12-18

Inspection Span

6 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$2,259

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 6 years, averaging 1.0 violations per visit. That's $2,259 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

1

Serious

50.0% of total

0

Willful

0.0% of total

1

Repeat

50.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,279

Current Penalty Amount

$4,517

Penalty Reduction

37.9%

What this shows Penalties were reduced by $2,762 from the initial assessment of $7,279. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How T-J Roofing & Sheet Metal LLC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric T-J Roofing & Sheet Metal LLC Industry Avg
Inspections 2 2.0
Violations 2 3.3
Total Penalty $4,517 $6,767
Avg Penalty per Inspection $2,259 $3,361
View all 61,260 employers in Construction →

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for T-J Roofing & Sheet Metal LLC, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($4,517 here).

Universal Construction CO. $4,518 RI Larry Reetz Construction $4,515 NM Demouy General Contracting, INC. $4,515 AL Alii Landscaping & Maintenance LLC $4,515 HI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Frame Q LLC 2 insp. Palisades Park, NJ George & LYNCH, INC. 2 insp. Millsboro, DE Vallencourt Construction CO., INC. 2 insp. Saint Augustine, FL Ukone General Construction LLC 2 insp. Madison, NJ

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Universal Construction CO.
Providence, RI
2 inspections $4,518
Demouy General Contracting, INC.
Mobile, AL
2 inspections $4,515
Alii Landscaping & Maintenance LLC
Lihue, HI
2 inspections $4,515
Park Construction Corporation
Manchester, NH
2 inspections $4,520
Jones Construction
Billings, MT
3 inspections $4,520

Compare T-J Roofing & Sheet Metal LLC vs Universal Construction CO. side-by-side →

What to do with this record

Use T-J Roofing & Sheet Metal LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare T-J Roofing & Sheet Metal LLC against Universal Construction CO., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether T-J Roofing & Sheet Metal LLC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is T-J Roofing & Sheet Metal LLC safe to work at? ▼
Based on OSHA records, T-J Roofing & Sheet Metal LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 2 violations across 2 inspections, including 1 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does T-J Roofing & Sheet Metal LLC have? ▼
T-J Roofing & Sheet Metal LLC has 2 OSHA violations on record, including 1 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $4,517.
How many OSHA inspections has T-J Roofing & Sheet Metal LLC had? ▼
T-J Roofing & Sheet Metal LLC has had 2 OSHA inspections, with the first recorded on 2015-03-30 and the most recent on 2020-12-18. This averages 1.0 violations per inspection.
What is the total penalty amount for T-J Roofing & Sheet Metal LLC? ▼
T-J Roofing & Sheet Metal LLC has been assessed $4,517 in current OSHA penalties, reduced from an initial assessment of $7,279 (a 37.9% reduction).
Does T-J Roofing & Sheet Metal LLC have any serious or willful violations? ▼
Yes. T-J Roofing & Sheet Metal LLC has 1 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does T-J Roofing & Sheet Metal LLC operate in? ▼
T-J Roofing & Sheet Metal LLC operates in the Construction sector (NAICS code 238160). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does T-J Roofing & Sheet Metal LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, T-J Roofing & Sheet Metal LLC ranks #58,078 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does T-J Roofing & Sheet Metal LLC's safety record compare to industry average? ▼
T-J Roofing & Sheet Metal LLC's total OSHA penalty of $4,517 is below the Construction industry average of $6,767 per employer. The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Universal Construction CO. in Providence, RI is a similar construction employer with $4,518 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.