Manufacturing · Perris, CA

Stretch Forming Corporation

According to OSHA enforcement records (2010–2026), Stretch Forming Corporation ranks #19,985 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 10 violations across 2 inspections.

Top 25% by penalty60% serious
$17,930
OSHA penalties
10
Violations cited
2
OSHA inspections
#19,985
of 99,447 penalized employers

Stretch Forming Corporation in Perris, CA has been the subject of 2 OSHA workplace inspections and 10 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,930. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Stretch Forming Corporation 2 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 10 violations, averaging 5.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #19,985 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Strait-Flex International INC. in O Fallon, MO is another manufacturing employer with 2 OSHA inspections on record and $17,927 in current penalties.

5.0
violations per inspection
60.0%
of violations were serious
#19,985
of 99,447 penalized employers

Compliance score

F 17/100
  • F OSHA safety compliance: 10 violations across 2 OSHA inspections (5.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Stretch Forming Corporation compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Stretch Forming Corporation sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,930 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Stretch Forming Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.03.119.13551.066.9OSHA inspectionsViolations citedLAROSE INDUSTRIES, LLC, OSHA inspections: 2 · Violations cited: 17OPTIMA STANTRON CORP…, OSHA inspections: 2 · Violations cited: 31ADVANTAGE POWDER COA…, OSHA inspections: 2 · Violations cited: 16STRAUSS FEEDS, L.L.C., OSHA inspections: 2 · Violations cited: 28PARKER- HANNIFIN COR…, OSHA inspections: 2 · Violations cited: 14ADONEL CONCRETE CORP., OSHA inspections: 2 · Violations cited: 20REHRIG PACIFIC COMPANY, OSHA inspections: 2 · Violations cited: 8ILPEA INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 8SHEDS UNLIMITED LLC, OSHA inspections: 2 · Violations cited: 20MUELLER COPPER TUBE …, OSHA inspections: 2 · Violations cited: 18SHELL OIL PRODUCTS C…, OSHA inspections: 2 · Violations cited: 8HEBCO PRODUCTS INC., OSHA inspections: 2 · Violations cited: 14TEMPCO ELECTRIC HEAT…, OSHA inspections: 2 · Violations cited: 6QUALITY ENGINEERED S…, OSHA inspections: 2 · Violations cited: 64DAVISCO FOODS INTERN…, OSHA inspections: 2 · Violations cited: 21ADVANCED STROBE PROD…, OSHA inspections: 2 · Violations cited: 31AVIENT CORPORATION, OSHA inspections: 2 · Violations cited: 6SIMPLY NATURAL FOODS…, OSHA inspections: 2 · Violations cited: 11BORGHI USA INC., OSHA inspections: 2 · Violations cited: 8KALINICH FENCE COMPANY, OSHA inspections: 2 · Violations cited: 17Stretch Forming Corp…, OSHA inspections: 2 · Violations cited: 10
Stretch Forming Corporation has 2 OSHA inspections on record and 10 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Stretch Forming Corporation in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Stretch Forming Corporation ranks #9,551 at $17,930 current penalty.

How Stretch Forming Corporation Compares

Stretch Forming Corporation's 5.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-01-07

Last Inspection

2025-12-08

Inspection Span

10 yrs

Violations / Inspection

5.0

Avg Penalty / Inspection

$8,965

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 10 years, averaging 5.0 violations per visit. That's $8,965 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$75,980

Current Penalty Amount

$17,930

Penalty Reduction

76.4%

What this shows Penalties were reduced by $58,050 from the initial assessment of $75,980. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Stretch Forming Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Stretch Forming Corporation Industry Avg
Inspections 2 2.6
Violations 10 8.0
Total Penalty $17,930 $15,763
Avg Penalty per Inspection $8,965 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Stretch Forming Corporation, both outside CA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Stretch Forming Corporation vs Bickel's Snack Food / Wege Division side-by-side →

What to do with this record

Use Stretch Forming Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Stretch Forming Corporation against Bickel's Snack Food / Wege Division, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Stretch Forming Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Stretch Forming Corporation safe to work at?
Based on OSHA records, Stretch Forming Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 10 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Stretch Forming Corporation have?
Stretch Forming Corporation has 10 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $17,930.
How many OSHA inspections has Stretch Forming Corporation had?
Stretch Forming Corporation has had 2 OSHA inspections, with the first recorded on 2016-01-07 and the most recent on 2025-12-08. This averages 5.0 violations per inspection.
What is the total penalty amount for Stretch Forming Corporation?
Stretch Forming Corporation has been assessed $17,930 in current OSHA penalties, reduced from an initial assessment of $75,980 (a 76.4% reduction).
Does Stretch Forming Corporation have any serious or willful violations?
Yes. Stretch Forming Corporation has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Stretch Forming Corporation operate in?
Stretch Forming Corporation operates in the Manufacturing sector (NAICS code 332114). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Stretch Forming Corporation rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Stretch Forming Corporation ranks #19,985 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Stretch Forming Corporation's safety record compare to industry average?
Stretch Forming Corporation's total OSHA penalty of $17,930 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Strait-Flex International INC. in O Fallon, MO is a similar manufacturing employer with $17,927 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.