PlainWorker
Employers › PA

Manufacturing · West Reading, PA

Stainless Steel Products

According to OSHA enforcement records (2010–2026), Stainless Steel Products has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

Stainless Steel Products in West Reading, PA has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Stainless Steel Products 3 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Truss Craft of Nebraska in Grand Island, NE is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Stainless Steel Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.009.218.427.636.8OSHA inspectionsViolations citedUNITED HOSPITAL SUPPLY CORPORATION, OSHA inspections: 3 · Violations cited: 21GERMAN PELLETS OF TEXAS, OSHA inspections: 3 · Violations cited: 13RBC INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 35HEARTHSIDE FOOD SOLUTIONS LLC DBA MAKER'S PRIDE, OSHA inspections: 3 · Violations cited: 11SCHAEFFLER TRANSMISSION, LLC, OSHA inspections: 3 · Violations cited: 10THE ATLAS GROUP, OSHA inspections: 3 · Violations cited: 6BELL WOODEN PRODUCTS, INC., OSHA inspections: 3 · Violations cited: 18GEM INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 19UNYTITE, INC., OSHA inspections: 3 · Violations cited: 8OSHKOSH DOOR COMPANY, OSHA inspections: 3 · Violations cited: 21BELMONT SAUSAGE COMPANY, OSHA inspections: 3 · Violations cited: 4HARTZELL FAN, INC., OSHA inspections: 3 · Violations cited: 17T3 MANUFACTURING, INC., OSHA inspections: 3 · Violations cited: 22CITY BREWING COMPANY, LLC, OSHA inspections: 3 · Violations cited: 7INNOVAR STRUCTURES, LLC, OSHA inspections: 3 · Violations cited: 18ALERIS ROLLED PRODUCTS LLC, OSHA inspections: 3 · Violations cited: 13MACROCAP LABS, INC., OSHA inspections: 3 · Violations cited: 10ENKEI FLORIDA, INC., OSHA inspections: 3 · Violations cited: 16HYUNDAI TRANSYS GEORGIA SEATING SYSTEM, LLC, OSHA inspections: 3 · Violations cited: 5KIMCHUK INC, OSHA inspections: 3 · Violations cited: 26Stainless Steel Products, OSHA inspections: 3 · Violations cited: 0
Stainless Steel Products has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Stainless Steel Products Compares

3 OSHA inspections on record for Stainless Steel Products in West Reading, PA, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Stainless Steel Products to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2026-01-16

Last Inspection

2026-05-01

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Stainless Steel Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Stainless Steel Products Industry Avg
Inspections 3 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Stainless Steel Products, both outside PA so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

United Hospital Supply Corporation 3 insp. Burlington, NJ German Pellets of Texas 3 insp. Port Arthur, TX RBC Industries, INC. 3 insp. Warwick, RI Hearthside Food Solutions LLC DBA Maker's Pride 3 insp. Kentwood, MI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Richard & Sons, LLC
Fond Du Lac, WI
2 inspections $0
Supreme Meats INC
Saint Francis, WI
2 inspections $0
Meta Manufacturing Corporation
Blue Ash, OH
2 inspections $0
Truss Craft of Nebraska
Grand Island, NE
2 inspections $0
F & F Foods, INC.
Chicago, IL
2 inspections $0

Compare Stainless Steel Products vs Richard & Sons, LLC side-by-side →

What to do with this record

Use Stainless Steel Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Stainless Steel Products against Richard & Sons, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Stainless Steel Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Stainless Steel Products safe to work at? ▼
Based on OSHA records, Stainless Steel Products's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Stainless Steel Products have? ▼
Stainless Steel Products has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Stainless Steel Products had? ▼
Stainless Steel Products has had 3 OSHA inspections, with the first recorded on 2026-01-16 and the most recent on 2026-05-01. This averages 0.0 violations per inspection.
What is the total penalty amount for Stainless Steel Products? ▼
Stainless Steel Products has been assessed $0 in current OSHA penalties.
What industry does Stainless Steel Products operate in? ▼
Stainless Steel Products operates in the Manufacturing sector (NAICS code 331222). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Stainless Steel Products's safety record compare to industry average? ▼
Stainless Steel Products's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Truss Craft of Nebraska in Grand Island, NE is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.