PlainWorker
Employers › PA

Manufacturing · Franklin, PA

Specialty Fabrication and Powder Coating, LLC

According to OSHA enforcement records (2010–2026), Specialty Fabrication and Powder Coating, LLC has a mixed safety record: 5 violations across 3 inspections. See the full breakdown below.

Upper half by penalty80% serious
$11,700
OSHA penalties
5
Violations cited
3
OSHA inspections
#30,870
of 100,495 penalized employers

Specialty Fabrication and Powder Coating, LLC in Franklin, PA has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Specialty Fabrication and Powder Coating, LLC 3 times across a longer 13-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 1.7 per inspection. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, B & G Foods, INC. in Roseland, NJ is another manufacturing employer with 2 OSHA inspections on record and $11,700 in current penalties.

1.7
violations per inspection
80.0%
of violations were serious
69%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Specialty Fabrication and Powder Coating, LLC runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,700 Bottom 31% least affordable more affordable than 31% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Specialty Fabrication and Powder Coating, LLC

The federal enforcement record for Specialty Fabrication and Powder Coating, LLC in Franklin, PA includes 3 OSHA inspections and 5 violations, translating to 1.67 violations per inspection. Of those violations, 4 (80.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $19,879 in initial penalties against this employer, later adjusted to a current total of $11,700 - a 41.1% reduction. Average penalty per inspection works out to $3,900. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately below peers (0.8x the sector average).

Inspection activity spans from 2011-11-10 to 2024-12-10, a window of roughly 13 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-11-10

Last Inspection

2024-12-10

Inspection Span

13 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$3,900

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 13 years, averaging 1.7 violations per visit. That's $3,900 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

4

Serious

80.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,879

Current Penalty Amount

$11,700

Penalty Reduction

41.1%

What this shows Penalties were reduced by $8,179 from the initial assessment of $19,879. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Specialty Fabrication and Powder Coating, LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Specialty Fabrication and Powder Coating, LLC Industry Avg
Inspections 3 2.5
Violations 5 7.8
Total Penalty $11,700 $15,410
Avg Penalty per Inspection $3,900 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Detroit Name Plate Etching INC
Ferndale, MI
2 inspections $11,700
Reddy Ice Corporation
Nashville, TN
2 inspections $11,700
Hood Packaging Corporation
Tyler, TX
3 inspections $11,700
B & G Foods, INC.
Roseland, NJ
2 inspections $11,700
DJ Acquisition Management DBA Weco Manufacturing
Ontario, NY
3 inspections $11,700

Compare Specialty Fabrication and Powder Coating, LLC vs Detroit Name Plate Etching INC side-by-side →

Frequently Asked Questions

Is Specialty Fabrication and Powder Coating, LLC safe to work at? ▼
Based on OSHA records, Specialty Fabrication and Powder Coating, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Specialty Fabrication and Powder Coating, LLC have? ▼
Specialty Fabrication and Powder Coating, LLC has 5 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,700.
How many OSHA inspections has Specialty Fabrication and Powder Coating, LLC had? ▼
Specialty Fabrication and Powder Coating, LLC has had 3 OSHA inspections, with the first recorded on 2011-11-10 and the most recent on 2024-12-10. This averages 1.7 violations per inspection.
What is the total penalty amount for Specialty Fabrication and Powder Coating, LLC? ▼
Specialty Fabrication and Powder Coating, LLC has been assessed $11,700 in current OSHA penalties, reduced from an initial assessment of $19,879 (a 41.1% reduction).
Does Specialty Fabrication and Powder Coating, LLC have any serious or willful violations? ▼
Yes. Specialty Fabrication and Powder Coating, LLC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Specialty Fabrication and Powder Coating, LLC operate in? ▼
Specialty Fabrication and Powder Coating, LLC operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Specialty Fabrication and Powder Coating, LLC's safety record compare to industry average? ▼
Specialty Fabrication and Powder Coating, LLC's total OSHA penalty of $11,700 is below the Manufacturing industry average of $15,410 per employer. The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, B & G Foods, INC. in Roseland, NJ is a similar manufacturing employer with $11,700 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in PA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Specialty Fabrication and Powder Coating, LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

  • See how Specialty Fabrication and Powder Coating, LLC compares to the 45,665 other employers in Manufacturing. Manufacturing record
  • Put this employer head-to-head with another on inspections, penalties, and back wages. Compare employers
  • Review the full OSHA & wage-enforcement picture for PA. PA state record

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.