PlainWorker
Employers › WI

Manufacturing · Oshkosh, WI

SMC Metal Fabricators INC

According to OSHA enforcement records (2010–2026), SMC Metal Fabricators INC ranks #20,253 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Top 25% by penalty67% serious
$17,695
OSHA penalties
15
Violations cited
2
OSHA inspections
#20,253
of 99,447 penalized employers

SMC Metal Fabricators INC in Oshkosh, WI has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,695. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected SMC Metal Fabricators INC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #20,253 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Kelpro INC in Sikeston, MO is another manufacturing employer with 2 OSHA inspections on record and $17,692 in current penalties.

7.5
violations per inspection
66.7%
of violations were serious
#20,253
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How SMC Metal Fabricators INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows SMC Metal Fabricators INC sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,695 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is SMC Metal Fabricators INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.317.432.547.662.8OSHA inspectionsViolations citedMIRACAPO PIZZA COMPA…, OSHA inspections: 2 · Violations cited: 32B & B LUMBER CO., INC., OSHA inspections: 2 · Violations cited: 60TRI-STATE ENVELOPE C…, OSHA inspections: 2 · Violations cited: 7KITTRICH CORPORATION, OSHA inspections: 2 · Violations cited: 32COLLEEN & HERB ENTER…, OSHA inspections: 2 · Violations cited: 7BIMBO BAKERIES USA, …, OSHA inspections: 2 · Violations cited: 9USA HARNESS INTERNAT…, OSHA inspections: 2 · Violations cited: 6BEAULIEU GROUP, LLC, OSHA inspections: 2 · Violations cited: 14ELEVATOR DOORS INC, OSHA inspections: 2 · Violations cited: 12CROSS TRAILERS, LLC, OSHA inspections: 2 · Violations cited: 14ATI FOIL, INC., OSHA inspections: 2 · Violations cited: 41USS POSCO INDUSTRIES, OSHA inspections: 2 · Violations cited: 5HOUSEHOLD METALS INC…, OSHA inspections: 2 · Violations cited: 9SUPERIOR CONCRETE MA…, OSHA inspections: 2 · Violations cited: 35EMPIRE CHEESE INC, OSHA inspections: 2 · Violations cited: 12MERSEN USA PTT CORP., OSHA inspections: 2 · Violations cited: 6ALL GRANITE AND MARB…, OSHA inspections: 2 · Violations cited: 17HANDY BUTTON MACHINE…, OSHA inspections: 2 · Violations cited: 10DUO FORM ACQUISITION…, OSHA inspections: 2 · Violations cited: 5CUISINE SOLUTIONS INC., OSHA inspections: 2 · Violations cited: 6SMC Metal Fabricator…, OSHA inspections: 2 · Violations cited: 15
SMC Metal Fabricators INC has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

SMC Metal Fabricators INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, SMC Metal Fabricators INC ranks #9,666 at $17,695 current penalty.

How SMC Metal Fabricators INC Compares

SMC Metal Fabricators INC's 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-04-19

Last Inspection

2015-03-30

Inspection Span

3 yrs

Violations / Inspection

7.5

Avg Penalty / Inspection

$8,848

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 7.5 violations per visit. That's $8,848 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

66.7% of total

0

Willful

0.0% of total

1

Repeat

6.7% of total

4

Other-Than-Serious

26.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$28,718

Current Penalty Amount

$17,695

Penalty Reduction

38.4%

What this shows Penalties were reduced by $11,023 from the initial assessment of $28,718. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How SMC Metal Fabricators INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric SMC Metal Fabricators INC Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $17,695 $15,763
Avg Penalty per Inspection $8,848 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for SMC Metal Fabricators INC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,695 here).

Valmont Newmark, INC. $17,694 AL Gibraltar Industries $17,697 TX Tharp Cabinet Company, LP $17,693 CO Kelpro INC $17,692 MO

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Miracapo Pizza Company LLC DBA Little Lady Foods 2 insp. Gurnee, IL B & B Lumber CO., INC. 2 insp. Jamesville, NY Tri-State Envelope Corporation 2 insp. Ashland, PA Kittrich Corporation 2 insp. Buford, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Valmont Newmark, INC.
Tuscaloosa, AL
3 inspections $17,694
Gibraltar Industries
Dallas, TX
2 inspections $17,697
Tharp Cabinet Company, LP
Loveland, CO
2 inspections $17,693
MKI Enterprise Group Inc. dba Steelcraft
Corona, CA
0 inspections $0
Kelpro INC
Sikeston, MO
2 inspections $17,692

Compare SMC Metal Fabricators INC vs Valmont Newmark, INC. side-by-side →

What to do with this record

Use SMC Metal Fabricators INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare SMC Metal Fabricators INC against Valmont Newmark, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether SMC Metal Fabricators INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is SMC Metal Fabricators INC safe to work at? ▼
Based on OSHA records, SMC Metal Fabricators INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does SMC Metal Fabricators INC have? ▼
SMC Metal Fabricators INC has 15 OSHA violations on record, including 10 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $17,695.
How many OSHA inspections has SMC Metal Fabricators INC had? ▼
SMC Metal Fabricators INC has had 2 OSHA inspections, with the first recorded on 2012-04-19 and the most recent on 2015-03-30. This averages 7.5 violations per inspection.
What is the total penalty amount for SMC Metal Fabricators INC? ▼
SMC Metal Fabricators INC has been assessed $17,695 in current OSHA penalties, reduced from an initial assessment of $28,718 (a 38.4% reduction).
Does SMC Metal Fabricators INC have any serious or willful violations? ▼
Yes. SMC Metal Fabricators INC has 10 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does SMC Metal Fabricators INC operate in? ▼
SMC Metal Fabricators INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does SMC Metal Fabricators INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, SMC Metal Fabricators INC ranks #20,253 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does SMC Metal Fabricators INC's safety record compare to industry average? ▼
SMC Metal Fabricators INC's total OSHA penalty of $17,695 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kelpro INC in Sikeston, MO is a similar manufacturing employer with $17,692 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.