Manufacturing · Mount Vernon, NY

S&M Woodworking INC.

According to OSHA enforcement records (2010–2026), S&M Woodworking INC. ranks #68,523 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 2 inspections.

Lower half by penalty100% serious
$3,000
OSHA penalties
5
Violations cited
2
OSHA inspections
#68,523
of 99,447 penalized employers

S&M Woodworking INC. in Mount Vernon, NY has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected S&M Woodworking INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #68,523 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Abbott-Action, INC. in Attleboro, MA is another manufacturing employer with 2 OSHA inspections on record and $3,000 in current penalties.

2.5
violations per inspection
100.0%
of violations were serious
#68,523
of 99,447 penalized employers

Compliance score

D 54/100
  • D OSHA safety compliance: 5 violations across 2 OSHA inspections (2.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How S&M Woodworking INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows S&M Woodworking INC. runs well below peers (0.19x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,000 Top 31% most affordable more affordable than 69% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is S&M Woodworking INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.317.23246.961.7OSHA inspectionsViolations citedALL FAB PRECISION SH…, OSHA inspections: 2 · Violations cited: 7SENSIENT FLAVORS INC., OSHA inspections: 2 · Violations cited: 31FORMOSA PLASTICS COR…, OSHA inspections: 2 · Violations cited: 20AMERICAN WIRE & CABL…, OSHA inspections: 2 · Violations cited: 50AIRSTREAM, INC, OSHA inspections: 2 · Violations cited: 5LIFEWAY WISCONSIN, I…, OSHA inspections: 2 · Violations cited: 25QUALITY INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 7KITTRICH CORPORATION, OSHA inspections: 2 · Violations cited: 16WMT HOUSING, LLC, OSHA inspections: 2 · Violations cited: 13JOHN KUHNI SONS, INC, OSHA inspections: 2 · Violations cited: 8THE TIMBERMEN, INC., OSHA inspections: 2 · Violations cited: 23NATURE SOY, LLC, OSHA inspections: 2 · Violations cited: 20LEVENT INDUSTRIES, I…, OSHA inspections: 2 · Violations cited: 18KITCHENMAX, LLC, OSHA inspections: 2 · Violations cited: 59AKRON SPECIAL MACHIN…, OSHA inspections: 2 · Violations cited: 14JEFCO MANUFACTURING,…, OSHA inspections: 2 · Violations cited: 6PATRICK INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 6FLOWLINE DIVISION OF…, OSHA inspections: 2 · Violations cited: 27PALMETTO STATE ARMOR…, OSHA inspections: 2 · Violations cited: 22CONNER COLORADO, LLC, OSHA inspections: 2 · Violations cited: 9S&M Woodworking INC., OSHA inspections: 2 · Violations cited: 5
S&M Woodworking INC. has 2 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

S&M Woodworking INC. in the Manufacturing enforcement ledger

In Manufacturing, S&M Woodworking INC. sits at penalty rank #27,204 of 35,243 penalized establishments ($3,000 assessed).

How S&M Woodworking INC. Compares

S&M Woodworking INC.'s 2.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.19x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-04-01

Last Inspection

2016-04-01

Inspection Span

1 yr

Violations / Inspection

2.5

Avg Penalty / Inspection

$1,500

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.5 violations per visit. That's $1,500 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,200

Current Penalty Amount

$3,000

Penalty Reduction

42.3%

What this shows Penalties were reduced by $2,200 from the initial assessment of $5,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How S&M Woodworking INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric S&M Woodworking INC. Industry Avg
Inspections 2 2.6
Violations 5 8.0
Total Penalty $3,000 $15,763
Avg Penalty per Inspection $1,500 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for S&M Woodworking INC., both outside NY so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare S&M Woodworking INC. vs Abbott-Action, INC. side-by-side →

What to do with this record

Use S&M Woodworking INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare S&M Woodworking INC. against Abbott-Action, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether S&M Woodworking INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is S&M Woodworking INC. safe to work at?
Based on OSHA records, S&M Woodworking INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does S&M Woodworking INC. have?
S&M Woodworking INC. has 5 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,000.
How many OSHA inspections has S&M Woodworking INC. had?
S&M Woodworking INC. has had 2 OSHA inspections, with the first recorded on 2016-04-01 and the most recent on 2016-04-01. This averages 2.5 violations per inspection.
What is the total penalty amount for S&M Woodworking INC.?
S&M Woodworking INC. has been assessed $3,000 in current OSHA penalties, reduced from an initial assessment of $5,200 (a 42.3% reduction).
Does S&M Woodworking INC. have any serious or willful violations?
Yes. S&M Woodworking INC. has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does S&M Woodworking INC. operate in?
S&M Woodworking INC. operates in the Manufacturing sector (NAICS code 321999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does S&M Woodworking INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, S&M Woodworking INC. ranks #68,523 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does S&M Woodworking INC.'s safety record compare to industry average?
S&M Woodworking INC.'s total OSHA penalty of $3,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Abbott-Action, INC. in Attleboro, MA is a similar manufacturing employer with $3,000 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.