PlainWorker
Employers › CA

Manufacturing · San Jose, CA

All Fab Precision Sheetmetal, INC.

According to OSHA enforcement records (2010–2026), All Fab Precision Sheetmetal, INC. has a concerning safety record: 7 violations across 2 inspections. See the full breakdown below.

Top 1% by penalty57% serious
$256,350
OSHA penalties
7
Violations cited
2
OSHA inspections
#337
of 100,495 penalized employers

All Fab Precision Sheetmetal, INC. in San Jose, CA has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $256,350. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected All Fab Precision Sheetmetal, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top 1% of penalized employers nationally. Of these, 4 were classified as serious and 2 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, PGT Industries INC. in Hialeah, FL is another manufacturing employer with 2 OSHA inspections on record and $254,014 in current penalties.

3.5
violations per inspection
57.1%
of violations were serious
100%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows All Fab Precision Sheetmetal, INC. runs far above peers (16.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$256,350 Bottom 1% least affordable more affordable than 0% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($256,350) is well above this band, the chart's rightmost open-ended bucket. This employer: $256,350 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About All Fab Precision Sheetmetal, INC.

The federal enforcement record for All Fab Precision Sheetmetal, INC. in San Jose, CA includes 2 OSHA inspections and 7 violations, translating to 3.50 violations per inspection. Of those violations, 4 (57.1%) were classified as serious, 2 (28.6%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $256,350 in initial penalties against this employer, later adjusted to a current total of $256,350 - no reduction from the original assessment. Average penalty per inspection works out to $128,175. Against the Manufacturing industry average of $15,410 per employer, this record runs far above peers (16.6x the sector average).

Inspection activity spans from 2024-06-17 to 2025-07-29, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2024-06-17

Last Inspection

2025-07-29

Inspection Span

1 yr

Violations / Inspection

3.5

Avg Penalty / Inspection

$128,175

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 3.5 violations per visit. That's $128,175 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

4

Serious

57.1% of total

2

Willful

28.6% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$256,350

Current Penalty Amount

$256,350

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How All Fab Precision Sheetmetal, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric All Fab Precision Sheetmetal, INC. Industry Avg
Inspections 2 2.5
Violations 7 7.8
Total Penalty $256,350 $15,410
Avg Penalty per Inspection $128,175 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

DDS Conveyor
Las Vegas, NV
0 inspections $0
Cooper Tire & Rubber Company
Tupelo, MS
6 inspections $257,171
The Western Sugar Cooperative
Billings, MT
14 inspections $257,593
MP Global Products, LLC
Norfolk, NE
8 inspections $254,563
PGT Industries INC.
Hialeah, FL
2 inspections $254,014

Compare All Fab Precision Sheetmetal, INC. vs DDS Conveyor side-by-side →

Frequently Asked Questions

Is All Fab Precision Sheetmetal, INC. safe to work at? ▼
Based on OSHA records, All Fab Precision Sheetmetal, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does All Fab Precision Sheetmetal, INC. have? ▼
All Fab Precision Sheetmetal, INC. has 7 OSHA violations on record, including 4 serious, 2 willful, and 0 repeat violations. The total current penalty amount is $256,350.
How many OSHA inspections has All Fab Precision Sheetmetal, INC. had? ▼
All Fab Precision Sheetmetal, INC. has had 2 OSHA inspections, with the first recorded on 2024-06-17 and the most recent on 2025-07-29. This averages 3.5 violations per inspection.
What is the total penalty amount for All Fab Precision Sheetmetal, INC.? ▼
All Fab Precision Sheetmetal, INC. has been assessed $256,350 in current OSHA penalties.
Does All Fab Precision Sheetmetal, INC. have any serious or willful violations? ▼
Yes. All Fab Precision Sheetmetal, INC. has 4 serious violations, 2 willful violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does All Fab Precision Sheetmetal, INC. operate in? ▼
All Fab Precision Sheetmetal, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does All Fab Precision Sheetmetal, INC.'s safety record compare to industry average? ▼
All Fab Precision Sheetmetal, INC.'s total OSHA penalty of $256,350 is above the Manufacturing industry average of $15,410 per employer (16.6x the average). The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, PGT Industries INC. in Hialeah, FL is a similar manufacturing employer with $254,014 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in CA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

All Fab Precision Sheetmetal, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.