PlainWorker
Employers › OK

Manufacturing · Tulsa, OK

Slim Haney Machining, INC.

According to OSHA enforcement records (2010–2026), Slim Haney Machining, INC. ranks #13,310 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 18 violations across 3 inspections.

Top 25% by penalty94% serious
$25,124
OSHA penalties
18
Violations cited
3
OSHA inspections
#13,310
of 99,447 penalized employers

Slim Haney Machining, INC. in Tulsa, OK has been the subject of 3 OSHA workplace inspections and 18 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $25,124. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Slim Haney Machining, INC. 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 18 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #13,310 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Sloan Lubruication Systems in Freeport, PA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

6.0
violations per inspection
94.4%
of violations were serious
#13,310
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 18 violations across 3 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Slim Haney Machining, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Slim Haney Machining, INC. runs moderately above peers (1.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$25,124 Bottom 13% least affordable more affordable than 13% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Slim Haney Machining, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.39.719.028.437.7OSHA inspectionsViolations citedLM WIND POWER BLADES, OSHA inspections: 3 · Violations cited: 11MATERIALS TRANSPORTA…, OSHA inspections: 3 · Violations cited: 10NAN YA PLASTICS CORP…, OSHA inspections: 3 · Violations cited: 13AUSTIN FOAM PLASTICS…, OSHA inspections: 3 · Violations cited: 3CRAFT BREW ALLIANCE …, OSHA inspections: 3 · Violations cited: 21B & B AIRPARTS, INC., OSHA inspections: 3 · Violations cited: 9TYSON MEXICAN ORIGIN…, OSHA inspections: 3 · Violations cited: 36ALTAIR PARAMOUNT, LLC, OSHA inspections: 3 · Violations cited: 11DAIMLER TRUCKS NORTH…, OSHA inspections: 3 · Violations cited: 22FLORIDA BEEF INC, OSHA inspections: 3 · Violations cited: 2R & S MACHINING, OSHA inspections: 3 · Violations cited: 10ILLINOIS MACHINE & T…, OSHA inspections: 3 · Violations cited: 18PLATECO, INC., OSHA inspections: 3 · Violations cited: 6G & J PEPSI-COLA BOT…, OSHA inspections: 3 · Violations cited: 11WAYNE FARMS, LLC, OSHA inspections: 3 · Violations cited: 2BAILSCO BLADES & CAS…, OSHA inspections: 3 · Violations cited: 7THE CROSBY COMPANY, OSHA inspections: 3 · Violations cited: 10KRAFT HEINZ FOOD COM…, OSHA inspections: 3 · Violations cited: 8THREE S ENTERPRISES,…, OSHA inspections: 3 · Violations cited: 6GRUMA CORPORATION, OSHA inspections: 3 · Violations cited: 9Slim Haney Machining…, OSHA inspections: 3 · Violations cited: 18
Slim Haney Machining, INC. has 3 OSHA inspections on record and 18 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Slim Haney Machining, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Slim Haney Machining, INC. ranks #6,512 at $25,124 current penalty.

How Slim Haney Machining, INC. Compares

Slim Haney Machining, INC.'s 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-10-10

Last Inspection

2023-05-17

Inspection Span

11 yrs

Violations / Inspection

6.0

Avg Penalty / Inspection

$8,375

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 11 years, averaging 6.0 violations per visit. That's $8,375 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

94.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

5.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$41,873

Current Penalty Amount

$25,124

Penalty Reduction

40.0%

What this shows Penalties were reduced by $16,749 from the initial assessment of $41,873. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Slim Haney Machining, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Slim Haney Machining, INC. Industry Avg
Inspections 3 2.6
Violations 18 8.0
Total Penalty $25,124 $15,763
Avg Penalty per Inspection $8,375 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Slim Haney Machining, INC., both outside OK so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($25,124 here).

Europastry USA INC. $25,123 NJ Maine Wild Blueberry Company $25,126 ME Meridian Specialty Yarn Group, INC. $25,118 NC The Skydyne Company $25,112 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

LM Wind Power Blades 3 insp. Grand Forks, ND Materials Transportation Company 3 insp. Temple, TX Nan Ya Plastics Corporation USA 3 insp. Wharton, TX Austin Foam Plastics, INC. 3 insp. Pflugerville, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Sloan Lubruication Systems
Freeport, PA
0 inspections $0
Europastry USA INC.
New Brunswick, NJ
5 inspections $25,123
United Alloy, INC.
Janesville, WI
5 inspections $15,446
Maine Wild Blueberry Company
Machias, ME
5 inspections $25,126
Meridian Specialty Yarn Group, INC.
Valdese, NC
6 inspections $25,118

Compare Slim Haney Machining, INC. vs Sloan Lubruication Systems side-by-side →

What to do with this record

Use Slim Haney Machining, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Slim Haney Machining, INC. against Sloan Lubruication Systems, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Slim Haney Machining, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Slim Haney Machining, INC. safe to work at? ▼
Based on OSHA records, Slim Haney Machining, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 18 violations across 3 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Slim Haney Machining, INC. have? ▼
Slim Haney Machining, INC. has 18 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $25,124.
How many OSHA inspections has Slim Haney Machining, INC. had? ▼
Slim Haney Machining, INC. has had 3 OSHA inspections, with the first recorded on 2012-10-10 and the most recent on 2023-05-17. This averages 6.0 violations per inspection.
What is the total penalty amount for Slim Haney Machining, INC.? ▼
Slim Haney Machining, INC. has been assessed $25,124 in current OSHA penalties, reduced from an initial assessment of $41,873 (a 40.0% reduction).
Does Slim Haney Machining, INC. have any serious or willful violations? ▼
Yes. Slim Haney Machining, INC. has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Slim Haney Machining, INC. operate in? ▼
Slim Haney Machining, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Slim Haney Machining, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Slim Haney Machining, INC. ranks #13,310 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Slim Haney Machining, INC.'s safety record compare to industry average? ▼
Slim Haney Machining, INC.'s total OSHA penalty of $25,124 is above the Manufacturing industry average of $15,763 per employer (1.6x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Sloan Lubruication Systems in Freeport, PA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.