Manufacturing · Shreveport, LA

Semon Production Machining, INC., Doug

According to OSHA enforcement records (2010–2026), Semon Production Machining, INC., Doug ranks #55,488 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Lower half by penalty0% serious
$5,000
OSHA penalties
2
Violations cited
2
OSHA inspections
#55,488
of 99,447 penalized employers

Semon Production Machining, INC., Doug in Shreveport, LA has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Semon Production Machining, INC., Doug 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #55,488 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, L-H Battery Company, Incorporated in Jeffersonville, OH is another manufacturing employer with 3 OSHA inspections on record and $5,000 in current penalties.

1.0
violations per inspection
0.0%
of violations were serious
#55,488
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Semon Production Machining, INC., Doug runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,000 Top 44% most affordable more affordable than 56% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Semon Production Machining, INC., Doug.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.124.136.248.3OSHA inspectionsViolations citedTHE BOEING COMPANY, OSHA inspections: 2 · Violations cited: 0RUST-OLEUM CORPORATION, OSHA inspections: 2 · Violations cited: 46NORTERA FOODS USA INC., OSHA inspections: 2 · Violations cited: 17SOUTHERN FIBER INC., OSHA inspections: 2 · Violations cited: 26PLASTIC USA, LLC., OSHA inspections: 2 · Violations cited: 9SHJ CONSTRUCTION GRO…, OSHA inspections: 2 · Violations cited: 13VOLUNTARY PURCHASING…, OSHA inspections: 2 · Violations cited: 16NEW DAIRY OHIO, LLC, OSHA inspections: 2 · Violations cited: 4SPRUILL PRODUCTS, INC., OSHA inspections: 2 · Violations cited: 35BAR BAKERS LLC, OSHA inspections: 2 · Violations cited: 9A. M. PYROTECHNICS, …, OSHA inspections: 2 · Violations cited: 13INTERNATIONAL PAPER …, OSHA inspections: 2 · Violations cited: 5GREEN RENEWABLE, INC., OSHA inspections: 2 · Violations cited: 12TOP SHELF MANUFACTUR…, OSHA inspections: 2 · Violations cited: 12FOX PACKAGING, OSHA inspections: 2 · Violations cited: 3TYSON FRESH MEATS INC., OSHA inspections: 2 · Violations cited: 5WISCONSIN PLASTIC PR…, OSHA inspections: 2 · Violations cited: 5PRECISION PROTECTIVE…, OSHA inspections: 2 · Violations cited: 10ELDORADO ARTESIAN SP…, OSHA inspections: 2 · Violations cited: 7JOHNSONVILLE SAUSAGE…, OSHA inspections: 2 · Violations cited: 4Semon Production Mac…, OSHA inspections: 2 · Violations cited: 2
Semon Production Machining, INC., Doug has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Semon Production Machining, INC., Doug in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Semon Production Machining, INC., Doug ranks #22,977 at $5,000 current penalty.

How Semon Production Machining, INC., Doug Compares

Semon Production Machining, INC., Doug's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-02-11

Last Inspection

2022-06-06

Inspection Span

6 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$2,500

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 1.0 violations per visit. That's $2,500 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,945

Current Penalty Amount

$5,000

Penalty Reduction

49.7%

What this shows Penalties were reduced by $4,945 from the initial assessment of $9,945. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Semon Production Machining, INC., Doug compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Semon Production Machining, INC., Doug Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $5,000 $15,763
Avg Penalty per Inspection $2,500 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Semon Production Machining, INC., Doug, both outside LA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,000 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Semon Production Machining, INC., Doug vs MG Foods side-by-side →

What to do with this record

Use Semon Production Machining, INC., Doug's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Semon Production Machining, INC., Doug against MG Foods, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Semon Production Machining, INC., Doug's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Semon Production Machining, INC., Doug safe to work at?
Based on OSHA records, Semon Production Machining, INC., Doug's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Semon Production Machining, INC., Doug have?
Semon Production Machining, INC., Doug has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,000.
How many OSHA inspections has Semon Production Machining, INC., Doug had?
Semon Production Machining, INC., Doug has had 2 OSHA inspections, with the first recorded on 2016-02-11 and the most recent on 2022-06-06. This averages 1.0 violations per inspection.
What is the total penalty amount for Semon Production Machining, INC., Doug?
Semon Production Machining, INC., Doug has been assessed $5,000 in current OSHA penalties, reduced from an initial assessment of $9,945 (a 49.7% reduction).
What industry does Semon Production Machining, INC., Doug operate in?
Semon Production Machining, INC., Doug operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Semon Production Machining, INC., Doug rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Semon Production Machining, INC., Doug ranks #55,488 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Semon Production Machining, INC., Doug's safety record compare to industry average?
Semon Production Machining, INC., Doug's total OSHA penalty of $5,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, L-H Battery Company, Incorporated in Jeffersonville, OH is a similar manufacturing employer with $5,000 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.