Manufacturing · Cleveland, OH

Republic Metals INC

According to OSHA enforcement records (2010–2026), Republic Metals INC ranks #14,391 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 30 violations across 3 inspections.

Top 25% by penalty80% serious
$23,696
OSHA penalties
30
Violations cited
3
OSHA inspections
#14,391
of 99,447 penalized employers

Republic Metals INC in Cleveland, OH has been the subject of 3 OSHA workplace inspections and 30 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $23,696. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Republic Metals INC 3 times over 1 year - more than twice a year on average. These inspections turned up 30 violations, averaging 10.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #14,391 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 24 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Kennedy Concrete INC. in Vineland, NJ is another manufacturing employer with 3 OSHA inspections on record and $23,699 in current penalties.

10.0
violations per inspection
80.0%
of violations were serious
#14,391
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 30 violations across 3 OSHA inspections (10.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Republic Metals INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Republic Metals INC runs moderately above peers (1.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$23,696 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Republic Metals INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.510.518.526.534.5OSHA inspectionsViolations citedARYZTA, LLC, OSHA inspections: 3 · Violations cited: 4HAR-CONN CHROME COMP…, OSHA inspections: 3 · Violations cited: 28SILVER BAY SEAFOODS-…, OSHA inspections: 3 · Violations cited: 18JPC HOLDINGS, LLC, OSHA inspections: 3 · Violations cited: 9THE TALARIA COMPANY,…, OSHA inspections: 3 · Violations cited: 13SOUTHERN TEA, LLC, OSHA inspections: 3 · Violations cited: 15TENSION ENVELOPE CORP., OSHA inspections: 3 · Violations cited: 15MPI ENGINEERED TECHN…, OSHA inspections: 3 · Violations cited: 7JP LILLIS ENTERPRISE…, OSHA inspections: 3 · Violations cited: 33AMERICAN BLANCHING C…, OSHA inspections: 3 · Violations cited: 10OK FOODS, INC., OSHA inspections: 3 · Violations cited: 4RAWLINGS SPORTING GO…, OSHA inspections: 3 · Violations cited: 22AMERICAN STRUCTURAL …, OSHA inspections: 3 · Violations cited: 22KIT HOMEBUILDERS WES…, OSHA inspections: 3 · Violations cited: 12PKM STEEL SERVICE, I…, OSHA inspections: 3 · Violations cited: 8READING ALLOYS, INC., OSHA inspections: 3 · Violations cited: 8CALABRO CHEESE CORPO…, OSHA inspections: 3 · Violations cited: 4INFINITY SPECIALTY T…, OSHA inspections: 3 · Violations cited: 8DEVRO INC, OSHA inspections: 3 · Violations cited: 23CHALLENGE MANUFACTUR…, OSHA inspections: 3 · Violations cited: 5Republic Metals INC, OSHA inspections: 3 · Violations cited: 30
Republic Metals INC has 3 OSHA inspections on record and 30 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Republic Metals INC in the Manufacturing enforcement ledger

In Manufacturing, Republic Metals INC sits at penalty rank #7,028 of 35,243 penalized establishments ($23,696 assessed).

How Republic Metals INC Compares

Republic Metals INC's 10.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-08-04

Last Inspection

2016-01-29

Inspection Span

1 yr

Violations / Inspection

10.0

Avg Penalty / Inspection

$7,899

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 10.0 violations per visit. That's $7,899 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

24

Serious

80.0% of total

0

Willful

0.0% of total

2

Repeat

6.7% of total

4

Other-Than-Serious

13.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$51,160

Current Penalty Amount

$23,696

Penalty Reduction

53.7%

What this shows Penalties were reduced by $27,464 from the initial assessment of $51,160. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Republic Metals INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Republic Metals INC Industry Avg
Inspections 3 2.6
Violations 30 8.0
Total Penalty $23,696 $15,763
Avg Penalty per Inspection $7,899 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Republic Metals INC, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($23,696 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Republic Metals INC vs Umicore Specialty Materials Recycling, LLC side-by-side →

What to do with this record

Use Republic Metals INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Republic Metals INC against Umicore Specialty Materials Recycling, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Republic Metals INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Republic Metals INC safe to work at?
Based on OSHA records, Republic Metals INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 30 violations across 3 inspections, including 24 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Republic Metals INC have?
Republic Metals INC has 30 OSHA violations on record, including 24 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $23,696.
How many OSHA inspections has Republic Metals INC had?
Republic Metals INC has had 3 OSHA inspections, with the first recorded on 2014-08-04 and the most recent on 2016-01-29. This averages 10.0 violations per inspection.
What is the total penalty amount for Republic Metals INC?
Republic Metals INC has been assessed $23,696 in current OSHA penalties, reduced from an initial assessment of $51,160 (a 53.7% reduction).
Does Republic Metals INC have any serious or willful violations?
Yes. Republic Metals INC has 24 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Republic Metals INC operate in?
Republic Metals INC operates in the Manufacturing sector (NAICS code 331410). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Republic Metals INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Republic Metals INC ranks #14,391 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Republic Metals INC's safety record compare to industry average?
Republic Metals INC's total OSHA penalty of $23,696 is above the Manufacturing industry average of $15,763 per employer (1.5x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kennedy Concrete INC. in Vineland, NJ is a similar manufacturing employer with $23,699 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.