Manufacturing · Miami, FL

Remington Steel and Signs LLC.

According to OSHA enforcement records (2010–2026), Remington Steel and Signs LLC. ranks #52,446 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 4 inspections.

Lower half by penalty38% serious
$5,532
OSHA penalties
8
Violations cited
4
OSHA inspections
#52,446
of 99,447 penalized employers

Remington Steel and Signs LLC. in Miami, FL has been the subject of 4 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,532. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Remington Steel and Signs LLC.: 4 inspections in 1 year, several times a year. These inspections resulted in 8 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #52,446 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Architectural Doors, INC. in Denver, CO is another manufacturing employer with 2 OSHA inspections on record and $5,531 in current penalties.

2.0
violations per inspection
37.5%
of violations were serious
#52,446
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 8 violations across 4 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Remington Steel and Signs LLC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Remington Steel and Signs LLC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,532 Top 47% most affordable more affordable than 53% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Remington Steel and Signs LLC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0019.138.357.476.5OSHA inspectionsViolations citedATLANTIC METROCAST INC, OSHA inspections: 4 · Violations cited: 73BERRY PLASTICS CORPO…, OSHA inspections: 4 · Violations cited: 11QUALITY WELDING & FA…, OSHA inspections: 4 · Violations cited: 34CONVERTING TECHNOLOG…, OSHA inspections: 4 · Violations cited: 29FRASER SHIPYARDS, LLC, OSHA inspections: 4 · Violations cited: 6BEST PROVISION CO., …, OSHA inspections: 4 · Violations cited: 18JERED, LLC, OSHA inspections: 4 · Violations cited: 17THE J.M. SMUCKER COM…, OSHA inspections: 4 · Violations cited: 4CONTINENTAL FABRICAT…, OSHA inspections: 4 · Violations cited: 18MORRISON TOOL & FAB,…, OSHA inspections: 4 · Violations cited: 21RICH PRODUCTS CORPOR…, OSHA inspections: 4 · Violations cited: 3SMW MANUFACTURING INC., OSHA inspections: 4 · Violations cited: 16UTILITY TRAILER MANU…, OSHA inspections: 4 · Violations cited: 2ALUMINUM BLANKING CO…, OSHA inspections: 4 · Violations cited: 9HI-TECH PLATING COMP…, OSHA inspections: 4 · Violations cited: 14KENT GAMEBORE CORPOR…, OSHA inspections: 4 · Violations cited: 12C P KELCO, OSHA inspections: 4 · Violations cited: 3DJKO INC DBA DESIGNE…, OSHA inspections: 4 · Violations cited: 24NUCOR STEEL DECATUR,…, OSHA inspections: 4 · Violations cited: 4A & E MANUFACTURING …, OSHA inspections: 4 · Violations cited: 6Remington Steel and …, OSHA inspections: 4 · Violations cited: 8
Remington Steel and Signs LLC. has 4 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Remington Steel and Signs LLC. in the Manufacturing enforcement ledger

In Manufacturing, Remington Steel and Signs LLC. sits at penalty rank #22,100 of 35,243 penalized establishments ($5,532 assessed).

How Remington Steel and Signs LLC. Compares

Remington Steel and Signs LLC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2018-04-26

Last Inspection

2019-03-28

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,383

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 1 year, averaging 2.0 violations per visit. That's $1,383 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

37.5% of total

0

Willful

0.0% of total

1

Repeat

12.5% of total

4

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,080

Current Penalty Amount

$5,532

Penalty Reduction

39.1%

What this shows Penalties were reduced by $3,548 from the initial assessment of $9,080. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Remington Steel and Signs LLC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Remington Steel and Signs LLC. Industry Avg
Inspections 4 2.6
Violations 8 8.0
Total Penalty $5,532 $15,763
Avg Penalty per Inspection $1,383 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Remington Steel and Signs LLC., both outside FL so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Remington Steel and Signs LLC. vs The Lenape Group, LLC side-by-side →

What to do with this record

Use Remington Steel and Signs LLC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Remington Steel and Signs LLC. against The Lenape Group, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Remington Steel and Signs LLC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Remington Steel and Signs LLC. safe to work at?
Based on OSHA records, Remington Steel and Signs LLC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 4 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Remington Steel and Signs LLC. have?
Remington Steel and Signs LLC. has 8 OSHA violations on record, including 3 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $5,532.
How many OSHA inspections has Remington Steel and Signs LLC. had?
Remington Steel and Signs LLC. has had 4 OSHA inspections, with the first recorded on 2018-04-26 and the most recent on 2019-03-28. This averages 2.0 violations per inspection.
What is the total penalty amount for Remington Steel and Signs LLC.?
Remington Steel and Signs LLC. has been assessed $5,532 in current OSHA penalties, reduced from an initial assessment of $9,080 (a 39.1% reduction).
Does Remington Steel and Signs LLC. have any serious or willful violations?
Yes. Remington Steel and Signs LLC. has 3 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Remington Steel and Signs LLC. operate in?
Remington Steel and Signs LLC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Remington Steel and Signs LLC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Remington Steel and Signs LLC. ranks #52,446 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Remington Steel and Signs LLC.'s safety record compare to industry average?
Remington Steel and Signs LLC.'s total OSHA penalty of $5,532 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Architectural Doors, INC. in Denver, CO is a similar manufacturing employer with $5,531 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.