PlainWorker
Employers › WI

Manufacturing · Menomonee Falls, WI

Converting Technology, INC.

According to OSHA enforcement records (2010–2026), Converting Technology, INC. has a concerning safety record: 29 violations across 4 inspections. See the full breakdown below.

Top 5% by penalty90% serious
$61,817
OSHA penalties
29
Violations cited
4
OSHA inspections
#3,721
of 100,495 penalized employers

Converting Technology, INC. in Menomonee Falls, WI has been the subject of 4 OSHA workplace inspections and 29 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $61,817. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Converting Technology, INC. 4 times over 3 years, roughly annually. These inspections resulted in 29 violations, averaging 7.3 per inspection - a notably high rate. Its total OSHA penalty ranks in the top 5% of penalized employers nationally. Of these, 26 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, Applied Molding Technologies, LLC. in Frederic, WI is another manufacturing employer with 9 OSHA inspections on record and $61,818 in current penalties.

7.3
violations per inspection
89.7%
of violations were serious
96%
of penalized employers rank lower

How Converting Technology, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Converting Technology, INC. runs well above peers (4.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$61,817 Bottom 4% least affordable more affordable than 4% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($61,817) is well above this band, the chart's rightmost open-ended bucket. This employer: $61,817 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Converting Technology, INC.

The federal enforcement record for Converting Technology, INC. in Menomonee Falls, WI includes 4 OSHA inspections and 29 violations, translating to 7.25 violations per inspection. Of those violations, 26 (89.7%) were classified as serious, 0 (0.0%) as willful, and 1 (3.4%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $108,763 in initial penalties against this employer, later adjusted to a current total of $61,817 - a 43.2% reduction. Average penalty per inspection works out to $15,454. Against the Manufacturing industry average of $15,410 per employer, this record runs well above peers (4.0x the sector average).

Inspection activity spans from 2014-02-24 to 2016-10-04, a window of roughly 3 years.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2014-02-24

Last Inspection

2016-10-04

Inspection Span

3 yrs

Violations / Inspection

7.3

Avg Penalty / Inspection

$15,454

Industry Avg / Inspection

$6,092

What this shows 4 inspections over 3 years, averaging 7.3 violations per visit. That's $15,454 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

26

Serious

89.7% of total

0

Willful

0.0% of total

1

Repeat

3.4% of total

2

Other-Than-Serious

6.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$108,763

Current Penalty Amount

$61,817

Penalty Reduction

43.2%

What this shows Penalties were reduced by $46,946 from the initial assessment of $108,763. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Converting Technology, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Converting Technology, INC. Industry Avg
Inspections 4 2.5
Violations 29 7.8
Total Penalty $61,817 $15,410
Avg Penalty per Inspection $15,454 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Applied Molding Technologies, LLC.
Frederic, WI
9 inspections $61,818
McM Precision Castings, INC.
Weston, OH
4 inspections $61,816
Texarome INC
Leakey, TX
2 inspections $61,800
Nidra LLC
Chesapeake, VA
3 inspections $61,795
Damon Industries
Sparks, NV
3 inspections $61,784

Compare Converting Technology, INC. vs Applied Molding Technologies, LLC. side-by-side →

Frequently Asked Questions

Is Converting Technology, INC. safe to work at? ▼
Based on OSHA records, Converting Technology, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 29 violations across 4 inspections, including 26 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Converting Technology, INC. have? ▼
Converting Technology, INC. has 29 OSHA violations on record, including 26 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $61,817.
How many OSHA inspections has Converting Technology, INC. had? ▼
Converting Technology, INC. has had 4 OSHA inspections, with the first recorded on 2014-02-24 and the most recent on 2016-10-04. This averages 7.3 violations per inspection.
What is the total penalty amount for Converting Technology, INC.? ▼
Converting Technology, INC. has been assessed $61,817 in current OSHA penalties, reduced from an initial assessment of $108,763 (a 43.2% reduction).
Does Converting Technology, INC. have any serious or willful violations? ▼
Yes. Converting Technology, INC. has 26 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Converting Technology, INC. operate in? ▼
Converting Technology, INC. operates in the Manufacturing sector (NAICS code 326111). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Converting Technology, INC.'s safety record compare to industry average? ▼
Converting Technology, INC.'s total OSHA penalty of $61,817 is above the Manufacturing industry average of $15,410 per employer (4.0x the average). The employer has 4 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Applied Molding Technologies, LLC. in Frederic, WI is a similar manufacturing employer with $61,818 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in WI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Converting Technology, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.