PlainWorker
Employers › UT

Manufacturing · Ogden, UT

Quick Turn Precision Machining INC

According to OSHA enforcement records (2010–2026), Quick Turn Precision Machining INC ranks #70,386 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 11 violations across 4 inspections.

Lower half by penalty55% serious
$2,749
OSHA penalties
11
Violations cited
4
OSHA inspections
#70,386
of 99,447 penalized employers

Quick Turn Precision Machining INC in Ogden, UT has been the subject of 4 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,749. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Quick Turn Precision Machining INC 4 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 11 violations, averaging 2.8 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #70,386 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Magna Modular Systems INC. DBA Aim Systems Warren LLC in Warren, MI is another manufacturing employer with 3 OSHA inspections on record and $2,750 in current penalties.

2.8
violations per inspection
54.5%
of violations were serious
#70,386
of 99,447 penalized employers

Compliance score

D 50/100
  • D OSHA safety compliance: 11 violations across 4 OSHA inspections (2.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Quick Turn Precision Machining INC runs well below peers (0.17x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,749 Top 29% most affordable more affordable than 71% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Quick Turn Precision Machining INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.514.32841.855.5OSHA inspectionsViolations citedCORN ISLAND SHIPYARD…, OSHA inspections: 4 · Violations cited: 53OLSON FABRICATION, I…, OSHA inspections: 4 · Violations cited: 33INEOS ABS (USA) LLC, OSHA inspections: 4 · Violations cited: 25VIKING PAPER CORPORA…, OSHA inspections: 4 · Violations cited: 13KWS MANUFACTURING CO…, OSHA inspections: 4 · Violations cited: 36FUSION BABBITTING CO…, OSHA inspections: 4 · Violations cited: 33ROOSEVELT PAPER COMP…, OSHA inspections: 4 · Violations cited: 5US GREENFIBER, LLC, OSHA inspections: 4 · Violations cited: 12CUSTOM GLASS SOLUTIO…, OSHA inspections: 4 · Violations cited: 5THREE RIVERS BOAT & …, OSHA inspections: 4 · Violations cited: 32AWNEX, INC., OSHA inspections: 4 · Violations cited: 22WS PACKAGING GROUP, …, OSHA inspections: 4 · Violations cited: 11PACEM DEFENSE LLC, OSHA inspections: 4 · Violations cited: 3TASLER INC, OSHA inspections: 4 · Violations cited: 20NIAGARA FIBERBOARD I…, OSHA inspections: 4 · Violations cited: 20KIRCHHOFF AUTOMOTIVE, OSHA inspections: 4 · Violations cited: 10CULINARY ART'S SPECI…, OSHA inspections: 4 · Violations cited: 14SUPERIOR SHEDS, INC., OSHA inspections: 4 · Violations cited: 8ALLIED SPECIALTY FOO…, OSHA inspections: 4 · Violations cited: 13GUNDERSON LLC, OSHA inspections: 4 · Violations cited: 30Quick Turn Precision…, OSHA inspections: 4 · Violations cited: 11
Quick Turn Precision Machining INC has 4 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Quick Turn Precision Machining INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Quick Turn Precision Machining INC ranks #27,921 at $2,749 current penalty.

How Quick Turn Precision Machining INC Compares

Quick Turn Precision Machining INC's 2.75 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.17x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2016-08-31

Last Inspection

2025-12-03

Inspection Span

9 yrs

Violations / Inspection

2.8

Avg Penalty / Inspection

$687

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 9 years, averaging 2.8 violations per visit. That's $687 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

54.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

45.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,174

Current Penalty Amount

$2,749

Penalty Reduction

34.1%

What this shows Penalties were reduced by $1,425 from the initial assessment of $4,174. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Quick Turn Precision Machining INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Quick Turn Precision Machining INC Industry Avg
Inspections 4 2.6
Violations 11 8.0
Total Penalty $2,749 $15,763
Avg Penalty per Inspection $687 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Quick Turn Precision Machining INC, both outside UT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,749 here).

Alvar, INC. $2,749 IL Plastatech Engineering $2,750 MI Aakron Rule CORP $2,750 TN Life Line Emergency Vehicles $2,750 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Corn Island Shipyard, INC. 4 insp. Grandview, IN Olson Fabrication, INC. 4 insp. Algoma, WI Ineos Abs (USA) LLC 4 insp. Addyston, OH Viking Paper Corporation 4 insp. Toledo, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Alvar, INC.
Washburn, IL
3 inspections $2,749
Synergy Prototype Stamping LLC
Clinton Township, MI
3 inspections $2,750
Sharpe Hill Vineyard, INC.
Pomfret, CT
2 inspections $2,750
Daou Vineyards, LLC
Paso Robles, CA
4 inspections $2,750
Magna Modular Systems INC. DBA Aim Systems Warren LLC
Warren, MI
3 inspections $2,750

Compare Quick Turn Precision Machining INC vs Alvar, INC. side-by-side →

What to do with this record

Use Quick Turn Precision Machining INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Quick Turn Precision Machining INC against Alvar, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Quick Turn Precision Machining INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Quick Turn Precision Machining INC safe to work at? ▼
Based on OSHA records, Quick Turn Precision Machining INC's workplace safety record is mixed, with some compliance concerns. The employer has 11 violations across 4 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Quick Turn Precision Machining INC have? ▼
Quick Turn Precision Machining INC has 11 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,749.
How many OSHA inspections has Quick Turn Precision Machining INC had? ▼
Quick Turn Precision Machining INC has had 4 OSHA inspections, with the first recorded on 2016-08-31 and the most recent on 2025-12-03. This averages 2.8 violations per inspection.
What is the total penalty amount for Quick Turn Precision Machining INC? ▼
Quick Turn Precision Machining INC has been assessed $2,749 in current OSHA penalties, reduced from an initial assessment of $4,174 (a 34.1% reduction).
Does Quick Turn Precision Machining INC have any serious or willful violations? ▼
Yes. Quick Turn Precision Machining INC has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Quick Turn Precision Machining INC operate in? ▼
Quick Turn Precision Machining INC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Quick Turn Precision Machining INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Quick Turn Precision Machining INC ranks #70,386 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Quick Turn Precision Machining INC's safety record compare to industry average? ▼
Quick Turn Precision Machining INC's total OSHA penalty of $2,749 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Magna Modular Systems INC. DBA Aim Systems Warren LLC in Warren, MI is a similar manufacturing employer with $2,750 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.