QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN

ROUTE 62 N, MASON COUNTY IND. PARK, POINT PLEASANT, WV 25550 · Manufacturing

QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN in POINT PLEASANT, WV has been the subject of 2 OSHA workplace inspections and 64 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $36,475. Industry sector: Manufacturing. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

2
OSHA Inspections
64
Violations Cited
$36,475
OSHA Penalties

Safety Assessment

QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has been inspected 2 times by OSHA over 1 year. These inspections resulted in 64 violations, averaging 32.0 violations per inspection. Of these, 59 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has been inspected fewer frequently.

What the Data Says About QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN

The federal enforcement record for QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN in POINT PLEASANT, WV includes 2 OSHA inspections and 64 violations, translating to 32.00 violations per inspection. Of those violations, 59 (92.2%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $69,850 in initial penalties against this employer, later adjusted to a current total of $36,475 — a 47.8% reduction. Average penalty per inspection works out to $18,238. Against the Manufacturing industry average of $13,853 per employer, this record runs above peers.

Inspection activity spans from 2010-02-23 to 2010-03-09, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
2
First Inspection
2010-02-23
Last Inspection
2010-03-09
Inspection Span
1 year
Violations per Inspection
32.0
Avg Penalty per Inspection
$18,238
Industry Avg per Inspection
$5,418

Violation Breakdown

59
Serious
92.2% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
5
Other-Than-Serious
7.8% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$69,850
Current Penalty Amount
$36,475
Penalty Reduction
47.8%

Penalties were reduced by $33,375 from the initial assessment of $69,850. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN compares to the Manufacturing sector, which has 23,042 employers tracked by PlainWorker.

Metric QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN Industry Avg
Inspections 2 2.6
Violations 64 8.2
Total Penalty $36,475 $13,853
Avg Penalty per Inspection $18,238 $5,418

Related Data from Other Sources

Workplace Safety Guides

Nearby & Similar Employers in Manufacturing

Compare QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN vs DAEHAN SOLUTION NEVADA, LLC. side-by-side →

Frequently Asked Questions

Is QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN safe to work at?
Based on OSHA records, QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN's workplace safety record is concerning, with multiple serious compliance issues. The employer has 64 violations across 2 inspections, including 59 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN have?
QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has 64 OSHA violations on record, including 59 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $36,475.
How many OSHA inspections has QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN had?
QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has had 2 OSHA inspections, with the first recorded on 2010-02-23 and the most recent on 2010-03-09. This averages 32.0 violations per inspection.
What is the total penalty amount for QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN?
QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has been assessed $36,475 in current OSHA penalties, reduced from an initial assessment of $69,850 (a 47.8% reduction).
Does QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN have any serious or willful violations?
Yes. QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN has 59 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN operate in?
QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN operates in the Manufacturing sector (NAICS code 331221). This industry has 23,042 employers tracked by PlainWorker, with 58,916 total OSHA inspections and $319.21M in cumulative penalties.
What are my rights if I work at QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN?
Under the Occupational Safety and Health Act, employees at QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN?
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN's safety record compare to industry average?
QUALITY ENGINEERED STEELS, LLC DBA WV COLD DRAWN's total OSHA penalty of $36,475 is above the Manufacturing industry average of $13,853 per employer (2.6x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with BLS →