Manufacturing · Berrien Springs, MI

Premier Tool & Die Cast Corporation

According to OSHA enforcement records (2010–2026), Premier Tool & Die Cast Corporation has a concerning safety record: 47 violations across 4 inspections. See the full breakdown below.

Top 1% by penalty49% serious
$638,450
OSHA penalties
47
Violations cited
4
OSHA inspections
#61
of 100,495 penalized employers

Premier Tool & Die Cast Corporation in Berrien Springs, MI has been the subject of 4 OSHA workplace inspections and 47 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $638,450. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Premier Tool & Die Cast Corporation: 4 inspections in 1 year, several times a year. These inspections turned up 47 violations, averaging 11.8 per inspection - an extremely dense concentration of citations. Its total OSHA penalty ranks in the top 1% of penalized employers nationally. Of these, 23 were classified as serious and 6 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, Kraft Heinz in Muscatine, IA is another manufacturing employer with 5 OSHA inspections on record and $612,833 in current penalties.

11.8
violations per inspection
48.9%
of violations were serious
100%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Premier Tool & Die Cast Corporation runs far above peers (41.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$638,450 Bottom 1% least affordable more affordable than 0% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($638,450) is well above this band, the chart's rightmost open-ended bucket. This employer: $638,450 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Premier Tool & Die Cast Corporation

The federal enforcement record for Premier Tool & Die Cast Corporation in Berrien Springs, MI includes 4 OSHA inspections and 47 violations, translating to 11.75 violations per inspection. Of those violations, 23 (48.9%) were classified as serious, 6 (12.8%) as willful, and 9 (19.1%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $638,450 in initial penalties against this employer, later adjusted to a current total of $638,450 - no reduction from the original assessment. Average penalty per inspection works out to $159,613. Against the Manufacturing industry average of $15,410 per employer, this record runs far above peers (41.4x the sector average).

Inspection activity spans from 2014-12-01 to 2015-10-14, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2014-12-01

Last Inspection

2015-10-14

Inspection Span

1 yr

Violations / Inspection

11.8

Avg Penalty / Inspection

$159,613

Industry Avg / Inspection

$6,092

What this shows 4 inspections over 1 year, averaging 11.8 violations per visit. That's $159,613 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

23

Serious

48.9% of total

6

Willful

12.8% of total

9

Repeat

19.1% of total

9

Other-Than-Serious

19.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$638,450

Current Penalty Amount

$638,450

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Premier Tool & Die Cast Corporation compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Premier Tool & Die Cast Corporation Industry Avg
Inspections 4 2.5
Violations 47 7.8
Total Penalty $638,450 $15,410
Avg Penalty per Inspection $159,613 $6,092

Nearby & Similar Employers in Manufacturing

Compare Premier Tool & Die Cast Corporation vs Pilkington North America INC side-by-side →

Frequently Asked Questions

Is Premier Tool & Die Cast Corporation safe to work at?
Based on OSHA records, Premier Tool & Die Cast Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 47 violations across 4 inspections, including 23 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Premier Tool & Die Cast Corporation have?
Premier Tool & Die Cast Corporation has 47 OSHA violations on record, including 23 serious, 6 willful, and 9 repeat violations. The total current penalty amount is $638,450.
How many OSHA inspections has Premier Tool & Die Cast Corporation had?
Premier Tool & Die Cast Corporation has had 4 OSHA inspections, with the first recorded on 2014-12-01 and the most recent on 2015-10-14. This averages 11.8 violations per inspection.
What is the total penalty amount for Premier Tool & Die Cast Corporation?
Premier Tool & Die Cast Corporation has been assessed $638,450 in current OSHA penalties.
Does Premier Tool & Die Cast Corporation have any serious or willful violations?
Yes. Premier Tool & Die Cast Corporation has 23 serious violations, 6 willful violations, and 9 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Premier Tool & Die Cast Corporation operate in?
Premier Tool & Die Cast Corporation operates in the Manufacturing sector (NAICS code 331521). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Premier Tool & Die Cast Corporation's safety record compare to industry average?
Premier Tool & Die Cast Corporation's total OSHA penalty of $638,450 is above the Manufacturing industry average of $15,410 per employer (41.4x the average). The employer has 4 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Kraft Heinz in Muscatine, IA is a similar manufacturing employer with $612,833 in current penalties.

Explore PlainWorker

What to check next

Premier Tool & Die Cast Corporation's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.