PlainWorker
Employers › PA

Manufacturing · Pottstown, PA

Precision Polymer Products, INC.

According to OSHA enforcement records (2010–2026), Precision Polymer Products, INC. ranks #28,225 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 11 violations across 2 inspections.

Upper half by penalty100% serious
$12,793
OSHA penalties
11
Violations cited
2
OSHA inspections
#28,225
of 99,447 penalized employers

Precision Polymer Products, INC. in Pottstown, PA has been the subject of 2 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,793. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Polymer Products, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 11 violations, averaging 5.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #28,225 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Caylym Technologies International LLC in Fresno, CA is another manufacturing employer with 2 OSHA inspections on record and $12,790 in current penalties.

5.5
violations per inspection
100.0%
of violations were serious
#28,225
of 99,447 penalized employers

Compliance score

F 10/100
  • F OSHA safety compliance: 11 violations across 2 OSHA inspections (5.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Polymer Products, INC. sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,793 Bottom 28% least affordable more affordable than 28% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Polymer Products, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.919.529.138.8OSHA inspectionsViolations citedWARE MILLING COMPANY…, OSHA inspections: 2 · Violations cited: 37FRAZER & JONES COMPA…, OSHA inspections: 2 · Violations cited: 25PEKING NOODLE CO., I…, OSHA inspections: 2 · Violations cited: 11PRICE RUBBER CORP., OSHA inspections: 2 · Violations cited: 29SMITH-BLAIR, INC., OSHA inspections: 2 · Violations cited: 2APPIAN MANUFACTURING…, OSHA inspections: 2 · Violations cited: 3TANNER TIMBER SERVIC…, OSHA inspections: 2 · Violations cited: 5AMERICAN SUGAR REFIN…, OSHA inspections: 2 · Violations cited: 11FLEXO CONVERTERS USA…, OSHA inspections: 2 · Violations cited: 7CUSTOM WOOD PRODUCTS, OSHA inspections: 2 · Violations cited: 9ENCOMPASS, LLC, OSHA inspections: 2 · Violations cited: 11ATLAS ROOFING CORPOR…, OSHA inspections: 2 · Violations cited: 9EVONIK CORPORATION, OSHA inspections: 2 · Violations cited: 6ADVANCED DIGITAL CAB…, OSHA inspections: 2 · Violations cited: 10SUPER MIX OF WISCONS…, OSHA inspections: 2 · Violations cited: 24HOHMANN & BARNARD, I…, OSHA inspections: 2 · Violations cited: 5H & M PLATING COMPAN…, OSHA inspections: 2 · Violations cited: 15WILSON SPORTING GOOD…, OSHA inspections: 2 · Violations cited: 6INFICON EDC, INC., OSHA inspections: 2 · Violations cited: 10MIAMI TECH, INC., OSHA inspections: 2 · Violations cited: 5Precision Polymer Pr…, OSHA inspections: 2 · Violations cited: 11
Precision Polymer Products, INC. has 2 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Polymer Products, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Precision Polymer Products, INC. ranks #13,114 at $12,793 current penalty.

How Precision Polymer Products, INC. Compares

Precision Polymer Products, INC.'s 5.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-04-24

Last Inspection

2014-09-12

Inspection Span

1 yr

Violations / Inspection

5.5

Avg Penalty / Inspection

$6,397

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 5.5 violations per visit. That's $6,397 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

11

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,216

Current Penalty Amount

$12,793

Penalty Reduction

33.4%

What this shows Penalties were reduced by $6,423 from the initial assessment of $19,216. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Precision Polymer Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Polymer Products, INC. Industry Avg
Inspections 2 2.6
Violations 11 8.0
Total Penalty $12,793 $15,763
Avg Penalty per Inspection $6,397 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Polymer Products, INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($12,793 here).

Pellet America Corporation $12,794 WI Mold Masters Company $12,790 MI Caylym Technologies International LLC $12,790 CA Orbis Corporation $12,796 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Ware Milling Company, INC. 2 insp. Waycross, GA Frazer & Jones Company, INC. 2 insp. Solvay, NY Peking Noodle CO., INC. 2 insp. Los Angeles, CA Price Rubber CORP. 2 insp. Montgomery, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Atlantic Precision Products, Inc.
Utica, MI
0 inspections $0
Mold Masters Company
Lapeer, MI
5 inspections $12,790
Caylym Technologies International LLC
Fresno, CA
2 inspections $12,790
Orbis Corporation
Monticello, IA
4 inspections $12,796
Consumers Concrete Corporation
Wyoming, MI
5 inspections $12,800

Compare Precision Polymer Products, INC. vs Atlantic Precision Products, Inc. side-by-side →

What to do with this record

Use Precision Polymer Products, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Polymer Products, INC. against Atlantic Precision Products, Inc., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Polymer Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Polymer Products, INC. safe to work at? ▼
Based on OSHA records, Precision Polymer Products, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 2 inspections, including 11 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Polymer Products, INC. have? ▼
Precision Polymer Products, INC. has 11 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $12,793.
How many OSHA inspections has Precision Polymer Products, INC. had? ▼
Precision Polymer Products, INC. has had 2 OSHA inspections, with the first recorded on 2014-04-24 and the most recent on 2014-09-12. This averages 5.5 violations per inspection.
What is the total penalty amount for Precision Polymer Products, INC.? ▼
Precision Polymer Products, INC. has been assessed $12,793 in current OSHA penalties, reduced from an initial assessment of $19,216 (a 33.4% reduction).
Does Precision Polymer Products, INC. have any serious or willful violations? ▼
Yes. Precision Polymer Products, INC. has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Polymer Products, INC. operate in? ▼
Precision Polymer Products, INC. operates in the Manufacturing sector (NAICS code 325211). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Polymer Products, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Polymer Products, INC. ranks #28,225 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Polymer Products, INC.'s safety record compare to industry average? ▼
Precision Polymer Products, INC.'s total OSHA penalty of $12,793 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Caylym Technologies International LLC in Fresno, CA is a similar manufacturing employer with $12,790 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.