PlainWorker
Employers › PA

Manufacturing · Hanover, PA

Precision Cut Industries, Incorporated

According to OSHA enforcement records (2010–2026), Precision Cut Industries, Incorporated ranks #38,311 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 2 inspections.

Upper half by penalty75% serious
$8,990
OSHA penalties
12
Violations cited
2
OSHA inspections
#38,311
of 99,447 penalized employers

Precision Cut Industries, Incorporated in Hanover, PA has been the subject of 2 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,990. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Cut Industries, Incorporated 2 times over 3 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #38,311 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Heartland Steel Products West LLC in Lodi, CA is another manufacturing employer with 5 OSHA inspections on record and $8,995 in current penalties.

6.0
violations per inspection
75.0%
of violations were serious
#38,311
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 12 violations across 2 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Cut Industries, Incorporated runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,990 Bottom 39% least affordable more affordable than 39% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Cut Industries, Incorporated.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.315.230.044.959.7OSHA inspectionsViolations citedDOLLAR TREE STORES, …, OSHA inspections: 2 · Violations cited: 4TRI STATE TIMBER SAW…, OSHA inspections: 2 · Violations cited: 57SCAPA NORTH AMERICA,…, OSHA inspections: 2 · Violations cited: 38TILCON NEW YORK INC., OSHA inspections: 2 · Violations cited: 6NEW HEAVEN CHEMICALS…, OSHA inspections: 2 · Violations cited: 16BELLA ELEVATOR, LLC, OSHA inspections: 2 · Violations cited: 10ERIC HAMILTON, OSHA inspections: 2 · Violations cited: 16FAIRWAY STAFFING SER…, OSHA inspections: 2 · Violations cited: 3GIVAUDAN FLAVORS COR…, OSHA inspections: 2 · Violations cited: 8PROMAXIMA MANUFACTUR…, OSHA inspections: 2 · Violations cited: 22BOLD IDEAS TEXAS, OSHA inspections: 2 · Violations cited: 7DIAMOND PRO CORPORAT…, OSHA inspections: 2 · Violations cited: 13WESTLAKE NATRIUM LLC, OSHA inspections: 2 · Violations cited: 4RICHARDS-WILBERT INC, OSHA inspections: 2 · Violations cited: 19LAKE ERIE SHIP REPAI…, OSHA inspections: 2 · Violations cited: 25KANEKA NORTH AMERICA…, OSHA inspections: 2 · Violations cited: 5AKEBONO BRAKE CORPOR…, OSHA inspections: 2 · Violations cited: 12JCIM, LLC, OSHA inspections: 2 · Violations cited: 8MONTEREY SCULPTURE C…, OSHA inspections: 2 · Violations cited: 17MARS PETCARE US INC., OSHA inspections: 2 · Violations cited: 10Precision Cut Indust…, OSHA inspections: 2 · Violations cited: 12
Precision Cut Industries, Incorporated has 2 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Cut Industries, Incorporated in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Precision Cut Industries, Incorporated ranks #17,050 at $8,990 current penalty.

How Precision Cut Industries, Incorporated Compares

Precision Cut Industries, Incorporated's 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-04-28

Last Inspection

2013-05-02

Inspection Span

3 yrs

Violations / Inspection

6.0

Avg Penalty / Inspection

$4,495

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 6.0 violations per visit. That's $4,495 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

75.0% of total

0

Willful

0.0% of total

1

Repeat

8.3% of total

2

Other-Than-Serious

16.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$13,300

Current Penalty Amount

$8,990

Penalty Reduction

32.4%

What this shows Penalties were reduced by $4,310 from the initial assessment of $13,300. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Precision Cut Industries, Incorporated compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Cut Industries, Incorporated Industry Avg
Inspections 2 2.6
Violations 12 8.0
Total Penalty $8,990 $15,763
Avg Penalty per Inspection $4,495 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Cut Industries, Incorporated, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,990 here).

NGK-Locke Polymer Insulators, INC. $8,992 VA Ai Design LLC $8,987 NY NCT Technologies Group INC. $8,986 OH Heartland Steel Products West LLC $8,995 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Dollar Tree Stores, INC. 2 insp. Weatherford, TX Tri State Timber Sawmill, LLC. 2 insp. Brashear, MO Scapa North America, LLC 2 insp. Windsor, CT Tilcon New York INC. 2 insp. Wharton, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

NGK-Locke Polymer Insulators, INC.
Virginia Beach, VA
2 inspections $8,992
H & H Castings, Incorporated
York, PA
2 inspections $8,988
Ai Design LLC
New York, NY
3 inspections $8,987
NCT Technologies Group INC.
Medina, OH
2 inspections $8,986
Heartland Steel Products West LLC
Lodi, CA
5 inspections $8,995

Compare Precision Cut Industries, Incorporated vs NGK-Locke Polymer Insulators, INC. side-by-side →

What to do with this record

Use Precision Cut Industries, Incorporated's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Cut Industries, Incorporated against NGK-Locke Polymer Insulators, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Cut Industries, Incorporated's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Cut Industries, Incorporated safe to work at? ▼
Based on OSHA records, Precision Cut Industries, Incorporated's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 2 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Cut Industries, Incorporated have? ▼
Precision Cut Industries, Incorporated has 12 OSHA violations on record, including 9 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $8,990.
How many OSHA inspections has Precision Cut Industries, Incorporated had? ▼
Precision Cut Industries, Incorporated has had 2 OSHA inspections, with the first recorded on 2010-04-28 and the most recent on 2013-05-02. This averages 6.0 violations per inspection.
What is the total penalty amount for Precision Cut Industries, Incorporated? ▼
Precision Cut Industries, Incorporated has been assessed $8,990 in current OSHA penalties, reduced from an initial assessment of $13,300 (a 32.4% reduction).
Does Precision Cut Industries, Incorporated have any serious or willful violations? ▼
Yes. Precision Cut Industries, Incorporated has 9 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Cut Industries, Incorporated operate in? ▼
Precision Cut Industries, Incorporated operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Cut Industries, Incorporated rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Cut Industries, Incorporated ranks #38,311 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Cut Industries, Incorporated's safety record compare to industry average? ▼
Precision Cut Industries, Incorporated's total OSHA penalty of $8,990 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Heartland Steel Products West LLC in Lodi, CA is a similar manufacturing employer with $8,995 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.