PlainWorker
Employers › IA

Manufacturing · Atlantic, IA

Precision Components CO - an Iowa LLC

According to OSHA enforcement records (2010–2026), Precision Components CO - an Iowa LLC ranks #43,240 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Upper half by penalty100% serious
$7,536
OSHA penalties
4
Violations cited
2
OSHA inspections
#43,240
of 99,447 penalized employers

Precision Components CO - an Iowa LLC in Atlantic, IA has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $7,536. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Components CO - an Iowa LLC 2 times across a longer 7-year span, an infrequent cadence. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #43,240 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Wallner Tooling/Expac, INC. in Kennesaw, GA is another manufacturing employer with 3 OSHA inspections on record and $7,536 in current penalties.

2.0
violations per inspection
100.0%
of violations were serious
#43,240
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Components CO - an Iowa LLC runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$7,536 Bottom 43% least affordable more affordable than 43% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Components CO - an Iowa LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.124.136.248.3OSHA inspectionsViolations citedTHE BOEING COMPANY, OSHA inspections: 2 · Violations cited: 0RUST-OLEUM CORPORATION, OSHA inspections: 2 · Violations cited: 46NORTERA FOODS USA INC., OSHA inspections: 2 · Violations cited: 17SOUTHERN FIBER INC., OSHA inspections: 2 · Violations cited: 26PLASTIC USA, LLC., OSHA inspections: 2 · Violations cited: 9SHJ CONSTRUCTION GRO…, OSHA inspections: 2 · Violations cited: 13VOLUNTARY PURCHASING…, OSHA inspections: 2 · Violations cited: 16NEW DAIRY OHIO, LLC, OSHA inspections: 2 · Violations cited: 4SPRUILL PRODUCTS, INC., OSHA inspections: 2 · Violations cited: 35BAR BAKERS LLC, OSHA inspections: 2 · Violations cited: 9A. M. PYROTECHNICS, …, OSHA inspections: 2 · Violations cited: 13INTERNATIONAL PAPER …, OSHA inspections: 2 · Violations cited: 5PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5GREEN RENEWABLE, INC., OSHA inspections: 2 · Violations cited: 12TOP SHELF MANUFACTUR…, OSHA inspections: 2 · Violations cited: 12FOX PACKAGING, OSHA inspections: 2 · Violations cited: 3TYSON FRESH MEATS INC., OSHA inspections: 2 · Violations cited: 5WISCONSIN PLASTIC PR…, OSHA inspections: 2 · Violations cited: 5PRECISION PROTECTIVE…, OSHA inspections: 2 · Violations cited: 10ELDORADO ARTESIAN SP…, OSHA inspections: 2 · Violations cited: 7Precision Components…, OSHA inspections: 2 · Violations cited: 4
Precision Components CO - an Iowa LLC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Components CO - an Iowa LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Precision Components CO - an Iowa LLC ranks #18,880 at $7,536 current penalty.

How Precision Components CO - an Iowa LLC Compares

Precision Components CO - an Iowa LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-05-02

Last Inspection

2024-04-30

Inspection Span

7 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$3,768

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 7 years, averaging 2.0 violations per visit. That's $3,768 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$15,069

Current Penalty Amount

$7,536

Penalty Reduction

50.0%

What this shows Penalties were reduced by $7,533 from the initial assessment of $15,069. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Precision Components CO - an Iowa LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Components CO - an Iowa LLC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $7,536 $15,763
Avg Penalty per Inspection $3,768 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Components CO - an Iowa LLC, both outside IA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($7,536 here).

Wallner Tooling/Expac, INC. $7,536 GA Mico Industries INC $7,536 MI Westwood Products, INC $7,534 CT Vaassen, INC $7,539 FL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

The Boeing Company 2 insp. North Charleston, SC Rust-Oleum Corporation 2 insp. Clarkston, GA Nortera Foods USA INC. 2 insp. Fairwater, WI Southern Fiber INC. 2 insp. Miami Gardens, FL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Wallner Tooling/Expac, INC.
Kennesaw, GA
3 inspections $7,536
Mico Industries INC
Wyoming, MI
2 inspections $7,536
IO Ranch Processing LLC
Evant, TX
0 inspections $0
Symphony +
Los Angeles, CA
0 inspections $0
Eaton Sweet Bakery
San Antonio, TX
0 inspections $0

Compare Precision Components CO - an Iowa LLC vs Wallner Tooling/Expac, INC. side-by-side →

What to do with this record

Use Precision Components CO - an Iowa LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Components CO - an Iowa LLC against Wallner Tooling/Expac, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Components CO - an Iowa LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Components CO - an Iowa LLC safe to work at? ▼
Based on OSHA records, Precision Components CO - an Iowa LLC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Components CO - an Iowa LLC have? ▼
Precision Components CO - an Iowa LLC has 4 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $7,536.
How many OSHA inspections has Precision Components CO - an Iowa LLC had? ▼
Precision Components CO - an Iowa LLC has had 2 OSHA inspections, with the first recorded on 2017-05-02 and the most recent on 2024-04-30. This averages 2.0 violations per inspection.
What is the total penalty amount for Precision Components CO - an Iowa LLC? ▼
Precision Components CO - an Iowa LLC has been assessed $7,536 in current OSHA penalties, reduced from an initial assessment of $15,069 (a 50.0% reduction).
Does Precision Components CO - an Iowa LLC have any serious or willful violations? ▼
Yes. Precision Components CO - an Iowa LLC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Components CO - an Iowa LLC operate in? ▼
Precision Components CO - an Iowa LLC operates in the Manufacturing sector (NAICS code 333120). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Components CO - an Iowa LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Components CO - an Iowa LLC ranks #43,240 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Components CO - an Iowa LLC's safety record compare to industry average? ▼
Precision Components CO - an Iowa LLC's total OSHA penalty of $7,536 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Wallner Tooling/Expac, INC. in Kennesaw, GA is a similar manufacturing employer with $7,536 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.