PlainWorker
Employers › MI

Manufacturing · Madison Heights, MI

Plating Specialties INC

According to OSHA enforcement records (2010–2026), Plating Specialties INC ranks #70,806 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 22 violations across 2 inspections.

Lower half by penalty55% serious
$2,700
OSHA penalties
22
Violations cited
2
OSHA inspections
#70,806
of 99,447 penalized employers

Plating Specialties INC in Madison Heights, MI has been the subject of 2 OSHA workplace inspections and 22 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Plating Specialties INC 2 times over 4 years, roughly once every couple of years. These inspections turned up 22 violations, averaging 11.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #70,806 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Southern Concrete Materials, INC DBA Charlotte Blo in Charlotte, NC is another manufacturing employer with 2 OSHA inspections on record and $2,700 in current penalties.

11.0
violations per inspection
54.5%
of violations were serious
#70,806
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 22 violations across 2 OSHA inspections (11.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Plating Specialties INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Plating Specialties INC runs well below peers (0.17x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,700 Top 29% most affordable more affordable than 71% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Plating Specialties INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0027.354.581.8109.1OSHA inspectionsViolations citedCARTHAGE SPECIALTY P…, OSHA inspections: 2 · Violations cited: 104CUISINE SOLUTIONS INC., OSHA inspections: 2 · Violations cited: 3AXION CORPORATION, OSHA inspections: 2 · Violations cited: 13ABRASIVE TECHNOLOGY,…, OSHA inspections: 2 · Violations cited: 13WOODWARD DESIGN + BU…, OSHA inspections: 2 · Violations cited: 10SCHWANS GLOBAL SUPPL…, OSHA inspections: 2 · Violations cited: 8AMES TRUE TEMPER, OSHA inspections: 2 · Violations cited: 11LMC-HB CORP., OSHA inspections: 2 · Violations cited: 24SIERRA PACIFIC INDUS…, OSHA inspections: 2 · Violations cited: 4INDUSTRIAL TIMBER, LLC, OSHA inspections: 2 · Violations cited: 8THE TOP DIE CASTING …, OSHA inspections: 2 · Violations cited: 5GREIF, INC., OSHA inspections: 2 · Violations cited: 8SEALY, INC., OSHA inspections: 2 · Violations cited: 2TRIBE 9 FOODS LLC, OSHA inspections: 2 · Violations cited: 4PAI INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 24UNION SLAUGHTER HOUS…, OSHA inspections: 2 · Violations cited: 16TARRIER FOODS CORPOR…, OSHA inspections: 2 · Violations cited: 5PAKO INC., OSHA inspections: 2 · Violations cited: 3PINNACLE POWDER COAT…, OSHA inspections: 2 · Violations cited: 13ELGIN INDUSTRIES DBA…, OSHA inspections: 2 · Violations cited: 9Plating Specialties …, OSHA inspections: 2 · Violations cited: 22
Plating Specialties INC has 2 OSHA inspections on record and 22 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Plating Specialties INC in the Manufacturing enforcement ledger

Manufacturing sector: Plating Specialties INC is the #27,972 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,700).

How Plating Specialties INC Compares

Plating Specialties INC's 11.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.17x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-02-26

Last Inspection

2022-05-03

Inspection Span

4 yrs

Violations / Inspection

11.0

Avg Penalty / Inspection

$1,350

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 11.0 violations per visit. That's $1,350 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

54.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

10

Other-Than-Serious

45.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,700

Current Penalty Amount

$2,700

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Plating Specialties INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Plating Specialties INC Industry Avg
Inspections 2 2.6
Violations 22 8.0
Total Penalty $2,700 $15,763
Avg Penalty per Inspection $1,350 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Plating Specialties INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,700 here).

James Austin Company $2,700 PA Imperial Hydraulic Service, INC. $2,700 WV Creel Printing LLC $2,700 NV Pacific Coast Producers, INC. $2,700 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Carthage Specialty Paperboard, INC. 2 insp. Carthage, NY Cuisine Solutions INC. 2 insp. Alexandria, VA Axion Corporation 2 insp. Huntsville, AL Abrasive Technology, INC. 2 insp. Lewis Center, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Southern Concrete Materials, INC DBA Charlotte Blo
Charlotte, NC
2 inspections $2,700
Dayton Natural Meats LLC
Dayton, OR
2 inspections $2,700
Fedco Manufacturing Incorporated
Larimer, PA
2 inspections $2,700
Electroplating Industries INC.
Clinton Township, MI
5 inspections $2,700
Willmore Manufacturing, INC
Phoenix, AZ
2 inspections $2,700

Compare Plating Specialties INC vs Southern Concrete Materials, INC DBA Charlotte Blo side-by-side →

What to do with this record

Use Plating Specialties INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Plating Specialties INC against Southern Concrete Materials, INC DBA Charlotte Blo, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Plating Specialties INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Plating Specialties INC safe to work at? ▼
Based on OSHA records, Plating Specialties INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 22 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Plating Specialties INC have? ▼
Plating Specialties INC has 22 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,700.
How many OSHA inspections has Plating Specialties INC had? ▼
Plating Specialties INC has had 2 OSHA inspections, with the first recorded on 2018-02-26 and the most recent on 2022-05-03. This averages 11.0 violations per inspection.
What is the total penalty amount for Plating Specialties INC? ▼
Plating Specialties INC has been assessed $2,700 in current OSHA penalties.
Does Plating Specialties INC have any serious or willful violations? ▼
Yes. Plating Specialties INC has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Plating Specialties INC operate in? ▼
Plating Specialties INC operates in the Manufacturing sector (NAICS code 332813). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Plating Specialties INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Plating Specialties INC ranks #70,806 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Plating Specialties INC's safety record compare to industry average? ▼
Plating Specialties INC's total OSHA penalty of $2,700 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Southern Concrete Materials, INC DBA Charlotte Blo in Charlotte, NC is a similar manufacturing employer with $2,700 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.