PlainWorker
Employers › PA

Manufacturing · Bristol, PA

Penn Steel Fabrication, INC.

According to OSHA enforcement records (2010–2026), Penn Steel Fabrication, INC. ranks #25,533 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 23 violations across 3 inspections.

Upper half by penalty78% serious
$14,170
OSHA penalties
23
Violations cited
3
OSHA inspections
#25,533
of 99,447 penalized employers

Penn Steel Fabrication, INC. in Bristol, PA has been the subject of 3 OSHA workplace inspections and 23 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,170. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Penn Steel Fabrication, INC. 3 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 23 violations, averaging 7.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #25,533 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 18 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Bennett Lumber Products, INC. in Princeton, ID is another manufacturing employer with 2 OSHA inspections on record and $14,174 in current penalties.

7.7
violations per inspection
78.3%
of violations were serious
#25,533
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 23 violations across 3 OSHA inspections (7.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Penn Steel Fabrication, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Penn Steel Fabrication, INC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,170 Bottom 26% least affordable more affordable than 26% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Penn Steel Fabrication, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.311.420.529.638.6OSHA inspectionsViolations citedSAF-HOLLAND, INC., OSHA inspections: 3 · Violations cited: 30ELKHART PRODUCTS COR…, OSHA inspections: 3 · Violations cited: 10GENERAL EXTRUSIONS, …, OSHA inspections: 3 · Violations cited: 4BAY CITIES TIN SHOP,…, OSHA inspections: 3 · Violations cited: 19WESTLAKE VINYLS COMP…, OSHA inspections: 3 · Violations cited: 16TUSK HARDWOOD, LLC, OSHA inspections: 3 · Violations cited: 14JSW STEEL USA, INC., OSHA inspections: 3 · Violations cited: 4BEE LINE COMPANY, OSHA inspections: 3 · Violations cited: 14METAL MANUFACTURING …, OSHA inspections: 3 · Violations cited: 11YELLOW CREEK CASTING…, OSHA inspections: 3 · Violations cited: 19SOLESBEE'S EQUIPMENT…, OSHA inspections: 3 · Violations cited: 14ZENAR CORPORATION, OSHA inspections: 3 · Violations cited: 5COSMOS MANUFACTURING…, OSHA inspections: 3 · Violations cited: 13EAGLE MANUFACTURING …, OSHA inspections: 3 · Violations cited: 18NORSTAN, INC., OSHA inspections: 3 · Violations cited: 9MGM INDUSTRIES INCOR…, OSHA inspections: 3 · Violations cited: 37WOOTEN MACHINE COMPA…, OSHA inspections: 3 · Violations cited: 4VOSS MANUFACTURING, …, OSHA inspections: 3 · Violations cited: 9CHESAPEAKE SHIPBUILD…, OSHA inspections: 3 · Violations cited: 5THE MANISCHEWITZ COM…, OSHA inspections: 3 · Violations cited: 4Penn Steel Fabricati…, OSHA inspections: 3 · Violations cited: 23
Penn Steel Fabrication, INC. has 3 OSHA inspections on record and 23 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Penn Steel Fabrication, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Penn Steel Fabrication, INC. ranks #11,999 at $14,170 current penalty.

How Penn Steel Fabrication, INC. Compares

Penn Steel Fabrication, INC.'s 7.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-12-22

Last Inspection

2024-06-05

Inspection Span

8 yrs

Violations / Inspection

7.7

Avg Penalty / Inspection

$4,723

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 8 years, averaging 7.7 violations per visit. That's $4,723 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

18

Serious

78.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

21.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$26,804

Current Penalty Amount

$14,170

Penalty Reduction

47.1%

What this shows Penalties were reduced by $12,634 from the initial assessment of $26,804. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Penn Steel Fabrication, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Penn Steel Fabrication, INC. Industry Avg
Inspections 3 2.6
Violations 23 8.0
Total Penalty $14,170 $15,763
Avg Penalty per Inspection $4,723 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Penn Steel Fabrication, INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,170 here).

4m Precision Industries, INC. $14,170 NY Bennett Lumber Products, INC. $14,174 ID Advanced Machine and Tool Company, INC. $14,175 VT Thermal Structures INC $14,175 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Saf-Holland, INC. 3 insp. Dumas, AR Elkhart Products Corporation 3 insp. Fayetteville, AR General Extrusions, INC. 3 insp. Youngstown, OH Bay Cities Tin Shop, INC. 3 insp. Gardena, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

4m Precision Industries, INC.
Auburn, NY
3 inspections $14,170
Great Vacs
West Jordan, UT
0 inspections $0
Bennett Lumber Products, INC.
Princeton, ID
2 inspections $14,174
Advanced Machine and Tool Company, INC.
Milton, VT
4 inspections $14,175
Thermal Structures INC
Corona, CA
3 inspections $14,175

Compare Penn Steel Fabrication, INC. vs 4m Precision Industries, INC. side-by-side →

What to do with this record

Use Penn Steel Fabrication, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Penn Steel Fabrication, INC. against 4m Precision Industries, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Penn Steel Fabrication, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Penn Steel Fabrication, INC. safe to work at? ▼
Based on OSHA records, Penn Steel Fabrication, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 23 violations across 3 inspections, including 18 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Penn Steel Fabrication, INC. have? ▼
Penn Steel Fabrication, INC. has 23 OSHA violations on record, including 18 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,170.
How many OSHA inspections has Penn Steel Fabrication, INC. had? ▼
Penn Steel Fabrication, INC. has had 3 OSHA inspections, with the first recorded on 2015-12-22 and the most recent on 2024-06-05. This averages 7.7 violations per inspection.
What is the total penalty amount for Penn Steel Fabrication, INC.? ▼
Penn Steel Fabrication, INC. has been assessed $14,170 in current OSHA penalties, reduced from an initial assessment of $26,804 (a 47.1% reduction).
Does Penn Steel Fabrication, INC. have any serious or willful violations? ▼
Yes. Penn Steel Fabrication, INC. has 18 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Penn Steel Fabrication, INC. operate in? ▼
Penn Steel Fabrication, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Penn Steel Fabrication, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Penn Steel Fabrication, INC. ranks #25,533 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Penn Steel Fabrication, INC.'s safety record compare to industry average? ▼
Penn Steel Fabrication, INC.'s total OSHA penalty of $14,170 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Bennett Lumber Products, INC. in Princeton, ID is a similar manufacturing employer with $14,174 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.