PlainWorker
Employers › VT

Manufacturing · Milton, VT

Advanced Machine and Tool Company, INC.

According to OSHA enforcement records (2010–2026), Advanced Machine and Tool Company, INC. ranks #25,527 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 32 violations across 4 inspections.

Upper half by penalty78% serious
$14,175
OSHA penalties
32
Violations cited
4
OSHA inspections
#25,527
of 99,447 penalized employers

Advanced Machine and Tool Company, INC. in Milton, VT has been the subject of 4 OSHA workplace inspections and 32 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,175. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advanced Machine and Tool Company, INC. 4 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 32 violations, averaging 8.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #25,527 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 25 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, T-Tek Material Handling, INC. in Montgomery, AL is another manufacturing employer with 3 OSHA inspections on record and $14,175 in current penalties.

8.0
violations per inspection
78.1%
of violations were serious
#25,527
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 32 violations across 4 OSHA inspections (8.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advanced Machine and Tool Company, INC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,175 Bottom 26% least affordable more affordable than 26% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advanced Machine and Tool Company, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0019.138.357.476.5OSHA inspectionsViolations citedPM ENGINEERED SOLUTI…, OSHA inspections: 4 · Violations cited: 73FANTASY COOKIE CORP., OSHA inspections: 4 · Violations cited: 9ARCH WOOD PROTECTION…, OSHA inspections: 4 · Violations cited: 14CUSTOM CAST MARBLEWO…, OSHA inspections: 4 · Violations cited: 34JAMES SKINNER BAKING…, OSHA inspections: 4 · Violations cited: 3PILGRIM'S PRIDE CORP…, OSHA inspections: 4 · Violations cited: 41BUSHNELL ILLINOIS TA…, OSHA inspections: 4 · Violations cited: 17CANAM BRIDGES US INC., OSHA inspections: 4 · Violations cited: 5CUSTOM ALUMINUM PROD…, OSHA inspections: 4 · Violations cited: 14OHIO VALLEY STAVE, I…, OSHA inspections: 4 · Violations cited: 13MINERVA DAIRY, INC., OSHA inspections: 4 · Violations cited: 15PEET'S COFFEE, INC., OSHA inspections: 4 · Violations cited: 3MIS INC, OSHA inspections: 4 · Violations cited: 20AMTEX-NMS, INC., OSHA inspections: 4 · Violations cited: 11DIAMOND WIRE SPRING …, OSHA inspections: 4 · Violations cited: 4AMANDA MANUFACTURING, OSHA inspections: 4 · Violations cited: 5AMERICAN CRYSTAL SUG…, OSHA inspections: 4 · Violations cited: 9FLUORTEK, INCORPORATED, OSHA inspections: 4 · Violations cited: 11AMERICAN PLASTIC TOY…, OSHA inspections: 4 · Violations cited: 35LAKESHORE PALLET, INC., OSHA inspections: 4 · Violations cited: 19Advanced Machine and…, OSHA inspections: 4 · Violations cited: 32
Advanced Machine and Tool Company, INC. has 4 OSHA inspections on record and 32 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advanced Machine and Tool Company, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Advanced Machine and Tool Company, INC. is the #11,992 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($14,175).

How Advanced Machine and Tool Company, INC. Compares

Advanced Machine and Tool Company, INC.'s 8.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-10-07

Last Inspection

2024-09-06

Inspection Span

9 yrs

Violations / Inspection

8.0

Avg Penalty / Inspection

$3,544

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 9 years, averaging 8.0 violations per visit. That's $3,544 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

25

Serious

78.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

21.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$22,976

Current Penalty Amount

$14,175

Penalty Reduction

38.3%

What this shows Penalties were reduced by $8,801 from the initial assessment of $22,976. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advanced Machine and Tool Company, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advanced Machine and Tool Company, INC. Industry Avg
Inspections 4 2.6
Violations 32 8.0
Total Penalty $14,175 $15,763
Avg Penalty per Inspection $3,544 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advanced Machine and Tool Company, INC., both outside VT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,175 here).

Thermal Structures INC $14,175 CA T-Tek Material Handling, INC. $14,175 AL Alloy & Stainless Fasteners INC $14,175 VA Integrity Plastics, Incorporated $14,175 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

PM Engineered Solutions INC. 4 insp. Watertown, CT Fantasy Cookie CORP. 4 insp. Sylmar, CA Arch Wood Protection, INC. 4 insp. Conley, GA Custom Cast Marbleworks, INC. 4 insp. Cincinnati, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Thermal Structures INC
Corona, CA
3 inspections $14,175
T-Tek Material Handling, INC.
Montgomery, AL
3 inspections $14,175
Alloy & Stainless Fasteners INC
Virginia Beach, VA
2 inspections $14,175
Integrity Plastics, Incorporated
Denver, PA
3 inspections $14,175
Maine Industrial Tire, LLC
Red Lion, PA
3 inspections $14,175

Compare Advanced Machine and Tool Company, INC. vs Thermal Structures INC side-by-side →

What to do with this record

Use Advanced Machine and Tool Company, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advanced Machine and Tool Company, INC. against Thermal Structures INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advanced Machine and Tool Company, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advanced Machine and Tool Company, INC. safe to work at? ▼
Based on OSHA records, Advanced Machine and Tool Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 32 violations across 4 inspections, including 25 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advanced Machine and Tool Company, INC. have? ▼
Advanced Machine and Tool Company, INC. has 32 OSHA violations on record, including 25 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,175.
How many OSHA inspections has Advanced Machine and Tool Company, INC. had? ▼
Advanced Machine and Tool Company, INC. has had 4 OSHA inspections, with the first recorded on 2015-10-07 and the most recent on 2024-09-06. This averages 8.0 violations per inspection.
What is the total penalty amount for Advanced Machine and Tool Company, INC.? ▼
Advanced Machine and Tool Company, INC. has been assessed $14,175 in current OSHA penalties, reduced from an initial assessment of $22,976 (a 38.3% reduction).
Does Advanced Machine and Tool Company, INC. have any serious or willful violations? ▼
Yes. Advanced Machine and Tool Company, INC. has 25 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advanced Machine and Tool Company, INC. operate in? ▼
Advanced Machine and Tool Company, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advanced Machine and Tool Company, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advanced Machine and Tool Company, INC. ranks #25,527 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advanced Machine and Tool Company, INC.'s safety record compare to industry average? ▼
Advanced Machine and Tool Company, INC.'s total OSHA penalty of $14,175 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, T-Tek Material Handling, INC. in Montgomery, AL is a similar manufacturing employer with $14,175 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.