PlainWorker
Employers › PA

Manufacturing · Denver, PA

Integrity Plastics, Incorporated

According to OSHA enforcement records (2010–2026), Integrity Plastics, Incorporated ranks #25,527 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 16 violations across 3 inspections.

Upper half by penalty75% serious
$14,175
OSHA penalties
16
Violations cited
3
OSHA inspections
#25,527
of 99,447 penalized employers

Integrity Plastics, Incorporated in Denver, PA has been the subject of 3 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,175. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Integrity Plastics, Incorporated 3 times over 1 year - more than twice a year on average. These inspections resulted in 16 violations, averaging 5.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #25,527 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Advanced Machine and Tool Company, INC. in Milton, VT is another manufacturing employer with 4 OSHA inspections on record and $14,175 in current penalties.

5.3
violations per inspection
75.0%
of violations were serious
#25,527
of 99,447 penalized employers

Compliance score

F 12/100
  • F OSHA safety compliance: 16 violations across 3 OSHA inspections (5.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Integrity Plastics, Incorporated sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,175 Bottom 26% least affordable more affordable than 26% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Integrity Plastics, Incorporated.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.110.52131.441.9OSHA inspectionsViolations citedDAKOTA BODIES, LLC, OSHA inspections: 3 · Violations cited: 30LE PAFE, INC., OSHA inspections: 3 · Violations cited: 17TFP CORPORATION, OSHA inspections: 3 · Violations cited: 28EQUISTAR CHEMICALS, LP, OSHA inspections: 3 · Violations cited: 6BIZON GROUP INC., OSHA inspections: 3 · Violations cited: 25UNITED WINDOW & DOOR…, OSHA inspections: 3 · Violations cited: 12SOUTHERN MINNESOTA B…, OSHA inspections: 3 · Violations cited: 13KARAVAN TRAILERS, INC., OSHA inspections: 3 · Violations cited: 7J.B. STAMPING INC., OSHA inspections: 3 · Violations cited: 29EXPERA SPECIALTY SOL…, OSHA inspections: 3 · Violations cited: 9AMERICAN BUILDING SU…, OSHA inspections: 3 · Violations cited: 33SOUTHERN STATES COOP…, OSHA inspections: 3 · Violations cited: 12NEWMAN TECHNOLOGY SO…, OSHA inspections: 3 · Violations cited: 40AMERICAN ACRYLIC & I…, OSHA inspections: 3 · Violations cited: 11JIM C. HAMER COMPANY, OSHA inspections: 3 · Violations cited: 2MERRILL INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 15EATON CORPORATION, OSHA inspections: 3 · Violations cited: 9GUNBOAT INTERNATIONA…, OSHA inspections: 3 · Violations cited: 13PANEL BUILT, INC., OSHA inspections: 3 · Violations cited: 19VALMONT NEWMARK, INC., OSHA inspections: 3 · Violations cited: 2Integrity Plastics, …, OSHA inspections: 3 · Violations cited: 16
Integrity Plastics, Incorporated has 3 OSHA inspections on record and 16 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Integrity Plastics, Incorporated in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Integrity Plastics, Incorporated ranks #11,992 at $14,175 current penalty.

How Integrity Plastics, Incorporated Compares

Integrity Plastics, Incorporated's 5.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-10-12

Last Inspection

2012-09-19

Inspection Span

1 yr

Violations / Inspection

5.3

Avg Penalty / Inspection

$4,725

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 5.3 violations per visit. That's $4,725 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,900

Current Penalty Amount

$14,175

Penalty Reduction

25.0%

What this shows Penalties were reduced by $4,725 from the initial assessment of $18,900. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Integrity Plastics, Incorporated compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Integrity Plastics, Incorporated Industry Avg
Inspections 3 2.6
Violations 16 8.0
Total Penalty $14,175 $15,763
Avg Penalty per Inspection $4,725 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Integrity Plastics, Incorporated, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,175 here).

Advanced Machine and Tool Company, INC. $14,175 VT Thermal Structures INC $14,175 CA T-Tek Material Handling, INC. $14,175 AL Alloy & Stainless Fasteners INC $14,175 VA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Dakota Bodies, LLC 3 insp. Watertown, SD Le Pafe, INC. 3 insp. Montebello, CA TFP Corporation 3 insp. Medina, OH Equistar Chemicals, LP 3 insp. Tuscola, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Advanced Machine and Tool Company, INC.
Milton, VT
4 inspections $14,175
Thermal Structures INC
Corona, CA
3 inspections $14,175
T-Tek Material Handling, INC.
Montgomery, AL
3 inspections $14,175
Alloy & Stainless Fasteners INC
Virginia Beach, VA
2 inspections $14,175
Maine Industrial Tire, LLC
Red Lion, PA
3 inspections $14,175

Compare Integrity Plastics, Incorporated vs Advanced Machine and Tool Company, INC. side-by-side →

What to do with this record

Use Integrity Plastics, Incorporated's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Integrity Plastics, Incorporated against Advanced Machine and Tool Company, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Integrity Plastics, Incorporated's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Integrity Plastics, Incorporated safe to work at? ▼
Based on OSHA records, Integrity Plastics, Incorporated's workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 3 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Integrity Plastics, Incorporated have? ▼
Integrity Plastics, Incorporated has 16 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,175.
How many OSHA inspections has Integrity Plastics, Incorporated had? ▼
Integrity Plastics, Incorporated has had 3 OSHA inspections, with the first recorded on 2011-10-12 and the most recent on 2012-09-19. This averages 5.3 violations per inspection.
What is the total penalty amount for Integrity Plastics, Incorporated? ▼
Integrity Plastics, Incorporated has been assessed $14,175 in current OSHA penalties, reduced from an initial assessment of $18,900 (a 25.0% reduction).
Does Integrity Plastics, Incorporated have any serious or willful violations? ▼
Yes. Integrity Plastics, Incorporated has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Integrity Plastics, Incorporated operate in? ▼
Integrity Plastics, Incorporated operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Integrity Plastics, Incorporated rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Integrity Plastics, Incorporated ranks #25,527 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Integrity Plastics, Incorporated's safety record compare to industry average? ▼
Integrity Plastics, Incorporated's total OSHA penalty of $14,175 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Advanced Machine and Tool Company, INC. in Milton, VT is a similar manufacturing employer with $14,175 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.