PlainWorker
Employers › OR

Manufacturing · Aloha, OR

Parks Metal Products INC

According to OSHA enforcement records (2010–2026), Parks Metal Products INC ranks #99,306 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty50% serious
$100
OSHA penalties
4
Violations cited
2
OSHA inspections
#99,306
of 99,447 penalized employers

Parks Metal Products INC in Aloha, OR has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Parks Metal Products INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #99,306 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Targhee Brands, INC in Rexburg, ID is another manufacturing employer with 3 OSHA inspections on record and $100 in current penalties.

2.0
violations per inspection
50.0%
of violations were serious
#99,306
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Parks Metal Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Parks Metal Products INC runs well below peers (0.01x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$100 Top 1% most affordable more affordable than 100% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Parks Metal Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0026.252.478.6104.8OSHA inspectionsViolations citedU.S. MINERALS, LLC, OSHA inspections: 2 · Violations cited: 35THE GOODYEAR TIRE & …, OSHA inspections: 2 · Violations cited: 11TULIP MOLDED PLASTIC…, OSHA inspections: 2 · Violations cited: 20GARVEY CORPORATION, OSHA inspections: 2 · Violations cited: 19GREEN HORIZON GLOBAL…, OSHA inspections: 2 · Violations cited: 19AMERBELLE TEXTILES, …, OSHA inspections: 2 · Violations cited: 88S D S LUMBER CO, OSHA inspections: 2 · Violations cited: 100ANNANDALE MILLWORK A…, OSHA inspections: 2 · Violations cited: 5COMANCHE STAINLESS LLC, OSHA inspections: 2 · Violations cited: 17SOLDREAM, INC., OSHA inspections: 2 · Violations cited: 27THOMPSON PIPE GROUP …, OSHA inspections: 2 · Violations cited: 5DUDLEY HARDWOODS, LLC, OSHA inspections: 2 · Violations cited: 21PRESCRIPTION TILLAGE…, OSHA inspections: 2 · Violations cited: 48BANCROFT GRANITE AND…, OSHA inspections: 2 · Violations cited: 60BH GRANITE & QUARTZ,…, OSHA inspections: 2 · Violations cited: 15TM INDUSTRIES, LLC, OSHA inspections: 2 · Violations cited: 27EXCELSO COFFEE AND T…, OSHA inspections: 2 · Violations cited: 26DJW ASSEMBLY, INC., OSHA inspections: 2 · Violations cited: 11E.H. BAARE CORPORATION, OSHA inspections: 2 · Violations cited: 12THE SPATZ CORPORATION, OSHA inspections: 2 · Violations cited: 11Parks Metal Products…, OSHA inspections: 2 · Violations cited: 4
Parks Metal Products INC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Parks Metal Products INC in the Manufacturing enforcement ledger

In Manufacturing, Parks Metal Products INC sits at penalty rank #35,092 of 35,243 penalized establishments ($100 assessed).

How Parks Metal Products INC Compares

Parks Metal Products INC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.01x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-01-08

Last Inspection

2010-06-25

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$50

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $50 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$100

Current Penalty Amount

$100

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Parks Metal Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Parks Metal Products INC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $100 $15,763
Avg Penalty per Inspection $50 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Parks Metal Products INC, both outside OR so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($100 here).

Impressive Manufacturing Services LLC $100 TN Inland Craft Prod $100 MI Momentum Industries INC $100 MI Alaskan Campers INC $100 WA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

U.S. Minerals, LLC 2 insp. Coffeen, IL The Goodyear Tire & Rubber Company 2 insp. Texarkana, AR Tulip Molded Plastics Corporation 2 insp. Niagara Falls, NY Garvey Corporation 2 insp. Hammonton, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Impressive Manufacturing Services LLC
Dyersburg, TN
2 inspections $100
Momentum Industries INC
Saint Louis, MI
2 inspections $100
Tachi-S Automotive Seating USA LLC
Mount Juliet, TN
2 inspections $100
Spec Industries INC
Springfield, OR
2 inspections $100
Targhee Brands, INC
Rexburg, ID
3 inspections $100

Compare Parks Metal Products INC vs Impressive Manufacturing Services LLC side-by-side →

What to do with this record

Use Parks Metal Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Parks Metal Products INC against Impressive Manufacturing Services LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Parks Metal Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Parks Metal Products INC safe to work at? ▼
Based on OSHA records, Parks Metal Products INC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Parks Metal Products INC have? ▼
Parks Metal Products INC has 4 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $100.
How many OSHA inspections has Parks Metal Products INC had? ▼
Parks Metal Products INC has had 2 OSHA inspections, with the first recorded on 2010-01-08 and the most recent on 2010-06-25. This averages 2.0 violations per inspection.
What is the total penalty amount for Parks Metal Products INC? ▼
Parks Metal Products INC has been assessed $100 in current OSHA penalties.
Does Parks Metal Products INC have any serious or willful violations? ▼
Yes. Parks Metal Products INC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Parks Metal Products INC operate in? ▼
Parks Metal Products INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Parks Metal Products INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Parks Metal Products INC ranks #99,306 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Parks Metal Products INC's safety record compare to industry average? ▼
Parks Metal Products INC's total OSHA penalty of $100 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Targhee Brands, INC in Rexburg, ID is a similar manufacturing employer with $100 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.