Manufacturing · Hortonville, WI

Midcon Products, INC.

According to OSHA enforcement records (2010–2026), Midcon Products, INC. ranks #9,998 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 31 violations across 4 inspections.

Top 10% by penalty77% serious

Compiled by Plainworker · September 6, 2026

$31,190
OSHA penalties: 31
Violations cited: 4
OSHA inspections: #9,998
of 99,447 penalized employers

Midcon Products, INC. in Hortonville, WI has been the subject of 4 OSHA workplace inspections and 31 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $31,190. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Midcon Products, INC. 4 times over 7 years, roughly once every couple of years. These inspections resulted in 31 violations, averaging 7.8 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #9,998 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 24 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Danser, INC. in Davisville, WV is another manufacturing employer with 6 OSHA inspections on record and $31,187 in current penalties.

7.8
violations per inspection: 77.4%
of violations were serious: #9,998
of 99,447 penalized employers

Compliance score

F 0/100

F OSHA safety compliance: 31 violations across 4 OSHA inspections (7.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Midcon Products, INC.

$31,190
Manufacturing avg

$15,763

What this shows Midcon Products, INC. runs moderately above peers (2.0x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$31,190 Bottom 10% least affordable more affordable than 10% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Midcon Products, INC..

Midcon Products, INC. has 4 OSHA inspections on record and 31 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Midcon Products, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Midcon Products, INC. ranks #4,966 at $31,190 current penalty.

How Midcon Products, INC. Compares

Midcon Products, INC.'s 7.75 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (2.0x the sector average).

Total Inspections

First Inspection

2011-02-03

Last Inspection

2018-02-13

Inspection Span

7 yrs

Violations / Inspection

7.8

Avg Penalty / Inspection

$7,798

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 7 years, averaging 7.8 violations per visit. That's $7,798 per inspection vs. the Manufacturing average of $6,093.

Serious

77.4% of total

Willful

0.0% of total

Repeat

0.0% of total

Other-Than-Serious

22.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$67,511

Current Penalty Amount

$31,190

Penalty Reduction

53.8%

What this shows Penalties were reduced by $36,321 from the initial assessment of $67,511. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Midcon Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Midcon Products, INC.	Industry Avg
Inspections	4	2.6
Violations	31	8.0
Total Penalty	$31,190	$15,763
Avg Penalty per Inspection	$7,798	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Midcon Products, INC., both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($31,190 here).

Danser, INC. $31,187 WV Wrayco Industries, INC. $31,185 OH Employment 2000 CORP. $31,200 MA Feldmeier Equipment, INC. $31,211 NV

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Foundation Food Group, INC. 4 insp. Gainesville, GA P J Murphy Forest Products CORP. 4 insp. Kane, PA Cabka North America 4 insp. Hazelwood, MO Marine Group Boat Works, LLC 4 insp. Chula Vista, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Danser, INC.

Davisville, WV

6 inspections $31,187

Wrayco Industries, INC.

Stow, OH

3 inspections $31,185

Mastermold, LLC

Johnson Creek, WI

4 inspections $31,196

Chris Kanagy

Shullsburg, WI

2 inspections $31,196

J.V. Finishing, Inc.

Los Angeles, CA

0 inspections $0

Compare Midcon Products, INC. vs Danser, INC. side-by-side →

What to do with this record

Use Midcon Products, INC.'s enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Midcon Products, INC. against Danser, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Midcon Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Midcon Products, INC. safe to work at? ▼

Based on OSHA records, Midcon Products, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 31 violations across 4 inspections, including 24 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Midcon Products, INC. have? ▼

Midcon Products, INC. has 31 OSHA violations on record, including 24 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $31,190.

How many OSHA inspections has Midcon Products, INC. had? ▼

Midcon Products, INC. has had 4 OSHA inspections, with the first recorded on 2011-02-03 and the most recent on 2018-02-13. This averages 7.8 violations per inspection.

What is the total penalty amount for Midcon Products, INC.? ▼

Midcon Products, INC. has been assessed $31,190 in current OSHA penalties, reduced from an initial assessment of $67,511 (a 53.8% reduction).

Does Midcon Products, INC. have any serious or willful violations? ▼

Yes. Midcon Products, INC. has 24 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Midcon Products, INC. operate in? ▼

Midcon Products, INC. operates in the Manufacturing sector (NAICS code 327390). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

Where does Midcon Products, INC. rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Midcon Products, INC. ranks #9,998 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Midcon Products, INC.'s safety record compare to industry average? ▼

Midcon Products, INC.'s total OSHA penalty of $31,190 is above the Manufacturing industry average of $15,763 per employer (2.0x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Danser, INC. in Davisville, WV is a similar manufacturing employer with $31,187 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.