PlainWorker
Employers › VA

Manufacturing · Hampton, VA

Mid Atlantic Metal Solutions, INC.

According to OSHA enforcement records (2010–2026), Mid Atlantic Metal Solutions, INC. ranks #15,142 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 40 violations across 3 inspections.

Top 25% by penalty93% serious
$22,670
OSHA penalties
40
Violations cited
3
OSHA inspections
#15,142
of 99,447 penalized employers

Mid Atlantic Metal Solutions, INC. in Hampton, VA has been the subject of 3 OSHA workplace inspections and 40 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,670. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mid Atlantic Metal Solutions, INC. 3 times over 1 year - more than twice a year on average. These inspections turned up 40 violations, averaging 13.3 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #15,142 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 37 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Sun-Tek Pet, LLC in Dublin, GA is another manufacturing employer with 2 OSHA inspections on record and $22,664 in current penalties.

13.3
violations per inspection
92.5%
of violations were serious
#15,142
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 40 violations across 3 OSHA inspections (13.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mid Atlantic Metal Solutions, INC. runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,670 Bottom 15% least affordable more affordable than 15% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mid Atlantic Metal Solutions, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.212.122.031.941.8OSHA inspectionsViolations citedT & D METAL PRODUCTS…, OSHA inspections: 3 · Violations cited: 5CG ROXANE LLC, OSHA inspections: 3 · Violations cited: 6PILGRIM'S PRIDE, OSHA inspections: 3 · Violations cited: 8WELCO ACETYLENE CORP., OSHA inspections: 3 · Violations cited: 24MPV MORGANTON PRESSU…, OSHA inspections: 3 · Violations cited: 16RUIZ FOODS PRODUCT, …, OSHA inspections: 3 · Violations cited: 9RAS PROCESS EQUIPMEN…, OSHA inspections: 3 · Violations cited: 12NIBCO INC., OSHA inspections: 3 · Violations cited: 9IDEAL MANUFACTURING,…, OSHA inspections: 3 · Violations cited: 13DYNATECT LEAD SCREWS…, OSHA inspections: 3 · Violations cited: 18NORTHSTAR DIRECT, LLC, OSHA inspections: 3 · Violations cited: 21JOHN J. STEUBY COMPANY, OSHA inspections: 3 · Violations cited: 21OX PAPERBOARD ILLINO…, OSHA inspections: 3 · Violations cited: 4ENPROTECH INDUSTRIAL…, OSHA inspections: 3 · Violations cited: 10FORMED FIBER TECHNOL…, OSHA inspections: 3 · Violations cited: 8DAL-TILE DISTRIBUTIO…, OSHA inspections: 3 · Violations cited: 6ORGANIC MATTERS, INC., OSHA inspections: 3 · Violations cited: 21REFLEK MANUFACTURING…, OSHA inspections: 3 · Violations cited: 11FIC AMERICA CORP., OSHA inspections: 3 · Violations cited: 4UNARCO MATERIAL HAND…, OSHA inspections: 3 · Violations cited: 8Mid Atlantic Metal S…, OSHA inspections: 3 · Violations cited: 40
Mid Atlantic Metal Solutions, INC. has 3 OSHA inspections on record and 40 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mid Atlantic Metal Solutions, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Mid Atlantic Metal Solutions, INC. ranks #7,385 at $22,670 current penalty.

How Mid Atlantic Metal Solutions, INC. Compares

Mid Atlantic Metal Solutions, INC.'s 13.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-03-24

Last Inspection

2023-11-17

Inspection Span

1 yr

Violations / Inspection

13.3

Avg Penalty / Inspection

$7,557

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 13.3 violations per visit. That's $7,557 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

37

Serious

92.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

7.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$22,670

Current Penalty Amount

$22,670

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Mid Atlantic Metal Solutions, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mid Atlantic Metal Solutions, INC. Industry Avg
Inspections 3 2.6
Violations 40 8.0
Total Penalty $22,670 $15,763
Avg Penalty per Inspection $7,557 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mid Atlantic Metal Solutions, INC., both outside VA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($22,670 here).

Tricab (USA) INC. $22,672 MA Tyson Foods, INC. $22,666 TX Sun-Tek Pet, LLC $22,664 GA Clearfield Metal Technologies INC. $22,676 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

T & D Metal Products, LLC 3 insp. Watseka, IL CG Roxane LLC 3 insp. Olancha, CA Pilgrim's Pride 3 insp. Lufkin, TX Welco Acetylene CORP. 3 insp. Newark, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Tricab (USA) INC.
Worcester, MA
2 inspections $22,672
Tyson Foods, INC.
Seguin, TX
5 inspections $22,666
Sun-Tek Pet, LLC
Dublin, GA
2 inspections $22,664
Clearfield Metal Technologies INC.
Clearfield, PA
3 inspections $22,676
Sja, INC.
Dadeville, AL
4 inspections $22,662

Compare Mid Atlantic Metal Solutions, INC. vs Tricab (USA) INC. side-by-side →

What to do with this record

Use Mid Atlantic Metal Solutions, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mid Atlantic Metal Solutions, INC. against Tricab (USA) INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mid Atlantic Metal Solutions, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mid Atlantic Metal Solutions, INC. safe to work at? ▼
Based on OSHA records, Mid Atlantic Metal Solutions, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 40 violations across 3 inspections, including 37 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mid Atlantic Metal Solutions, INC. have? ▼
Mid Atlantic Metal Solutions, INC. has 40 OSHA violations on record, including 37 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $22,670.
How many OSHA inspections has Mid Atlantic Metal Solutions, INC. had? ▼
Mid Atlantic Metal Solutions, INC. has had 3 OSHA inspections, with the first recorded on 2023-03-24 and the most recent on 2023-11-17. This averages 13.3 violations per inspection.
What is the total penalty amount for Mid Atlantic Metal Solutions, INC.? ▼
Mid Atlantic Metal Solutions, INC. has been assessed $22,670 in current OSHA penalties.
Does Mid Atlantic Metal Solutions, INC. have any serious or willful violations? ▼
Yes. Mid Atlantic Metal Solutions, INC. has 37 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mid Atlantic Metal Solutions, INC. operate in? ▼
Mid Atlantic Metal Solutions, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mid Atlantic Metal Solutions, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mid Atlantic Metal Solutions, INC. ranks #15,142 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mid Atlantic Metal Solutions, INC.'s safety record compare to industry average? ▼
Mid Atlantic Metal Solutions, INC.'s total OSHA penalty of $22,670 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Sun-Tek Pet, LLC in Dublin, GA is a similar manufacturing employer with $22,664 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.