PlainWorker
Employers › OH

Manufacturing · McConnelsville, OH

Miba Bearings US, LLC

According to OSHA enforcement records (2010–2026), Miba Bearings US, LLC has a concerning safety record: 15 violations across 3 inspections. See the full breakdown below.

Top 25% by penalty67% serious
$24,360
OSHA penalties
15
Violations cited
3
OSHA inspections
#13,853
of 100,495 penalized employers

Miba Bearings US, LLC in McConnelsville, OH has been the subject of 3 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,360. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Miba Bearings US, LLC 3 times over 3 years, roughly annually. These inspections resulted in 15 violations, averaging 5.0 per inspection - a notably high rate. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Alpha Omega Collectis, LLC in Aurora, CO is another manufacturing employer with 3 OSHA inspections on record and $24,365 in current penalties.

5.0
violations per inspection
66.7%
of violations were serious
86%
of penalized employers rank lower

How Miba Bearings US, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Miba Bearings US, LLC runs moderately above peers (1.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,360 Bottom 14% least affordable more affordable than 14% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Miba Bearings US, LLC

The federal enforcement record for Miba Bearings US, LLC in McConnelsville, OH includes 3 OSHA inspections and 15 violations, translating to 5.00 violations per inspection. Of those violations, 10 (66.7%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $36,400 in initial penalties against this employer, later adjusted to a current total of $24,360 - a 33.1% reduction. Average penalty per inspection works out to $8,120. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.6x the sector average).

Inspection activity spans from 2012-05-09 to 2015-07-10, a window of roughly 3 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-05-09

Last Inspection

2015-07-10

Inspection Span

3 yrs

Violations / Inspection

5.0

Avg Penalty / Inspection

$8,120

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 3 years, averaging 5.0 violations per visit. That's $8,120 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

10

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$36,400

Current Penalty Amount

$24,360

Penalty Reduction

33.1%

What this shows Penalties were reduced by $12,040 from the initial assessment of $36,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Miba Bearings US, LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Miba Bearings US, LLC Industry Avg
Inspections 3 2.5
Violations 15 7.8
Total Penalty $24,360 $15,410
Avg Penalty per Inspection $8,120 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Alpha Omega Collectis, LLC
Aurora, CO
3 inspections $24,365
Giorgio Fresh CO.
Toughkenamon, PA
2 inspections $16,436
Pacem Defense LLC
Perry, FL
4 inspections $24,367
Sourcecut Industries, INC.
Osseo, WI
5 inspections $24,353
MRC Polymers, INC.
Chicago, IL
5 inspections $24,370

Compare Miba Bearings US, LLC vs Alpha Omega Collectis, LLC side-by-side →

Frequently Asked Questions

Is Miba Bearings US, LLC safe to work at? ▼
Based on OSHA records, Miba Bearings US, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 3 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Miba Bearings US, LLC have? ▼
Miba Bearings US, LLC has 15 OSHA violations on record, including 10 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $24,360.
How many OSHA inspections has Miba Bearings US, LLC had? ▼
Miba Bearings US, LLC has had 3 OSHA inspections, with the first recorded on 2012-05-09 and the most recent on 2015-07-10. This averages 5.0 violations per inspection.
What is the total penalty amount for Miba Bearings US, LLC? ▼
Miba Bearings US, LLC has been assessed $24,360 in current OSHA penalties, reduced from an initial assessment of $36,400 (a 33.1% reduction).
Does Miba Bearings US, LLC have any serious or willful violations? ▼
Yes. Miba Bearings US, LLC has 10 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Miba Bearings US, LLC operate in? ▼
Miba Bearings US, LLC operates in the Manufacturing sector (NAICS code 331528). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Miba Bearings US, LLC's safety record compare to industry average? ▼
Miba Bearings US, LLC's total OSHA penalty of $24,360 is above the Manufacturing industry average of $15,410 per employer (1.6x the average). The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Alpha Omega Collectis, LLC in Aurora, CO is a similar manufacturing employer with $24,365 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in OH

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Miba Bearings US, LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.