PlainWorker
Employers › TN

Manufacturing · Dickson, TN

Metrican Stamping LLC

According to OSHA enforcement records (2010–2026), Metrican Stamping LLC has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

Metrican Stamping LLC in Dickson, TN has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Metrican Stamping LLC 3 times over 2 years, roughly annually. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Supreme Meats INC in Saint Francis, WI is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Metrican Stamping LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.009.719.429.138.9OSHA inspectionsViolations citedBIGTEX TRAILERS, OSHA inspections: 3 · Violations cited: 37DARLING INGREDIENTS …, OSHA inspections: 3 · Violations cited: 13C. E. SHEPHERD COMPA…, OSHA inspections: 3 · Violations cited: 16ALBAUGH LLC, OSHA inspections: 3 · Violations cited: 8EFFECTIVE PLAN, INC., OSHA inspections: 3 · Violations cited: 14GEIB REFINING CORPOR…, OSHA inspections: 3 · Violations cited: 37KELLY RYAN EQUIPMENT…, OSHA inspections: 3 · Violations cited: 21DOUGLAS DYNAMICS, INC., OSHA inspections: 3 · Violations cited: 14STAMPED FITTINGS, INC., OSHA inspections: 3 · Violations cited: 13STEVES AND SONS, INC., OSHA inspections: 3 · Violations cited: 6FOLIUM BIOSCIENCES, …, OSHA inspections: 3 · Violations cited: 12MOMENTUM MANUFACTURI…, OSHA inspections: 3 · Violations cited: 4AMEREQUIP CORPORATIO…, OSHA inspections: 3 · Violations cited: 8WOODLINE WORKS CORPO…, OSHA inspections: 3 · Violations cited: 17PACIFIC STATES INDUS…, OSHA inspections: 3 · Violations cited: 10INNER-TITE CORP., OSHA inspections: 3 · Violations cited: 6FABCO STEEL FABRICAT…, OSHA inspections: 3 · Violations cited: 9UNIVERSAL TEXTILE TE…, OSHA inspections: 3 · Violations cited: 5MEZA PALLETS INC, OSHA inspections: 3 · Violations cited: 26ROYAL CUP, INC., OSHA inspections: 3 · Violations cited: 3Metrican Stamping LLC, OSHA inspections: 3 · Violations cited: 0
Metrican Stamping LLC has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Metrican Stamping LLC Compares

3 OSHA inspections on record for Metrican Stamping LLC in Dickson, TN, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Metrican Stamping LLC to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2018-06-13

Last Inspection

2020-10-13

Inspection Span

2 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Metrican Stamping LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Metrican Stamping LLC Industry Avg
Inspections 3 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Metrican Stamping LLC, both outside TN so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Bigtex Trailers 3 insp. Kingston, OK Darling Ingredients INC. 3 insp. Grapeland, TX C. E. Shepherd Company, L.P. 3 insp. Houston, TX Albaugh LLC 3 insp. Saint Joseph, MO

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Chep Services, LLC
Jacksonville, FL
4 inspections $0
Richard & Sons, LLC
Fond Du Lac, WI
2 inspections $0
Supreme Meats INC
Saint Francis, WI
2 inspections $0
Meta Manufacturing Corporation
Blue Ash, OH
2 inspections $0
Truss Craft of Nebraska
Grand Island, NE
2 inspections $0

Compare Metrican Stamping LLC vs Chep Services, LLC side-by-side →

What to do with this record

Use Metrican Stamping LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Metrican Stamping LLC against Chep Services, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Metrican Stamping LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Metrican Stamping LLC safe to work at? ▼
Based on OSHA records, Metrican Stamping LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Metrican Stamping LLC have? ▼
Metrican Stamping LLC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Metrican Stamping LLC had? ▼
Metrican Stamping LLC has had 3 OSHA inspections, with the first recorded on 2018-06-13 and the most recent on 2020-10-13. This averages 0.0 violations per inspection.
What is the total penalty amount for Metrican Stamping LLC? ▼
Metrican Stamping LLC has been assessed $0 in current OSHA penalties.
What industry does Metrican Stamping LLC operate in? ▼
Metrican Stamping LLC operates in the Manufacturing sector (NAICS code 332116). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Metrican Stamping LLC's safety record compare to industry average? ▼
Metrican Stamping LLC's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Supreme Meats INC in Saint Francis, WI is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.