Manufacturing · Bay City, MI

Mersen USA GS CORP ? Bay City

According to OSHA enforcement records (2010–2026), Mersen USA GS CORP ? Bay City has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections

Mersen USA GS CORP ? Bay City in Bay City, MI has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mersen USA GS CORP ? Bay City 2 times over 2 years, roughly annually. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Mulherin Lumber Company in Augusta, GA is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mersen USA GS CORP ? Bay City.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0015.831.547.363OSHA inspectionsViolations citedMIRACAPO PIZZA COMPA…, OSHA inspections: 2 · Violations cited: 32B & B LUMBER CO., INC., OSHA inspections: 2 · Violations cited: 60TRI-STATE ENVELOPE C…, OSHA inspections: 2 · Violations cited: 7KITTRICH CORPORATION, OSHA inspections: 2 · Violations cited: 32COLLEEN & HERB ENTER…, OSHA inspections: 2 · Violations cited: 7BIMBO BAKERIES USA, …, OSHA inspections: 2 · Violations cited: 9USA HARNESS INTERNAT…, OSHA inspections: 2 · Violations cited: 6BEAULIEU GROUP, LLC, OSHA inspections: 2 · Violations cited: 14ELEVATOR DOORS INC, OSHA inspections: 2 · Violations cited: 12CROSS TRAILERS, LLC, OSHA inspections: 2 · Violations cited: 14ATI FOIL, INC., OSHA inspections: 2 · Violations cited: 41USS POSCO INDUSTRIES, OSHA inspections: 2 · Violations cited: 5HOUSEHOLD METALS INC…, OSHA inspections: 2 · Violations cited: 9SUPERIOR CONCRETE MA…, OSHA inspections: 2 · Violations cited: 35EMPIRE CHEESE INC, OSHA inspections: 2 · Violations cited: 12MERSEN USA PTT CORP., OSHA inspections: 2 · Violations cited: 6ALL GRANITE AND MARB…, OSHA inspections: 2 · Violations cited: 17HANDY BUTTON MACHINE…, OSHA inspections: 2 · Violations cited: 10CUISINE SOLUTIONS INC., OSHA inspections: 2 · Violations cited: 6MANIFOLD & PHALOR, I…, OSHA inspections: 2 · Violations cited: 22Mersen USA GS CORP ?…, OSHA inspections: 2 · Violations cited: 0
Mersen USA GS CORP ? Bay City has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Mersen USA GS CORP ? Bay City Compares

2 OSHA inspections on record for Mersen USA GS CORP ? Bay City in Bay City, MI, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Mersen USA GS CORP ? Bay City to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2023-10-18

Last Inspection

2025-07-17

Inspection Span

2 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Mersen USA GS CORP ? Bay City compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mersen USA GS CORP ? Bay City Industry Avg
Inspections 2 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mersen USA GS CORP ? Bay City, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Mersen USA GS CORP ? Bay City vs Mulherin Lumber Company side-by-side →

What to do with this record

Use Mersen USA GS CORP ? Bay City's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mersen USA GS CORP ? Bay City against Mulherin Lumber Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mersen USA GS CORP ? Bay City's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mersen USA GS CORP ? Bay City safe to work at?
Based on OSHA records, Mersen USA GS CORP ? Bay City's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mersen USA GS CORP ? Bay City have?
Mersen USA GS CORP ? Bay City has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Mersen USA GS CORP ? Bay City had?
Mersen USA GS CORP ? Bay City has had 2 OSHA inspections, with the first recorded on 2023-10-18 and the most recent on 2025-07-17. This averages 0.0 violations per inspection.
What is the total penalty amount for Mersen USA GS CORP ? Bay City?
Mersen USA GS CORP ? Bay City has been assessed $0 in current OSHA penalties.
What industry does Mersen USA GS CORP ? Bay City operate in?
Mersen USA GS CORP ? Bay City operates in the Manufacturing sector (NAICS code 335991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Mersen USA GS CORP ? Bay City's safety record compare to industry average?
Mersen USA GS CORP ? Bay City's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mulherin Lumber Company in Augusta, GA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.